Question about 1987 Toyota Pickup

1 Answer

Truck makes loud noise unless clutch is pushed in

My fiance recently replaced the clutch in his pickup because one day driving down the road it started making a really loud noise while driving, he pulled over and when he put it in gear it would make this really loud noise and not want to go anywhere. now it has new clutch and when he starts the truck it makes the same loud noise all the time unless the clutch is pushed in. any ideas???

Posted by on

  • jdestefano Sep 22, 2008

    Thanks, I will pass this info onto him and let you know if that takes care of it.



    Just in case any further suggestions still welcome.

  • Anonymous Mar 28, 2014

    Squeaking noise under vehical just started

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Chances are the adjustment of the throwout bearing fork is the problem . because of vibration that is the rattling that you are hearing. correct adjustment should be as follows.

#1...peddle travle should be no more than 1 1/2 inches

#2...the clearance between throw out bearing and fork no more than 1/2 inch

#3...clearance between fork and fork stops is 1/8 inch

also there should be grease zerts in the shaft that holds the fork and linkage make sure they are not dry of grease...please rate the solution....thanks

Posted on Sep 22, 2008

  • Ronald Mueller
    Ronald Mueller Sep 22, 2008

    please rate this as helpful then. if the problem is solved then you can change it to a fix ya.....thanks

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1992 izusu pickup make weird nosie when i push clutch down


The noise is likely the clutch pressure plate release bearing on the collar of the manual transmission input shaft. To replace this part requires the transmission be removed from the car, a fairly expensive repair. Have this guess of mine confirmed by a local shop before you do any repairs.

Sep 11, 2012 | 1992 Isuzu Pickup

1 Answer

2002 9.3 concertable. There is a noise going on when im driving. seems to go away when I change gears. then the noise is back. could it be transmission?


I want to say it sounds like your throw out bearing or pilot bearing when your going down the road when it makes the sound push in the clutch and when it go,s away keep the clutch pushed in and give it some gas and see if it still makes the sound if it dont then it is the throw out bearing or pilot bearing that is all part of a clutch kit sometimes the throw out bearing or pilot bearing gos out befor the clutch doe,s let me know what happens have a good day hope that helps

Oct 24, 2011 | 2002 Saab 9-5

1 Answer

I have a 1994 Nissan pickup. v6 manual trans. I get a loud hum as I drive. But when I press the clutch in, the hum stops. release clutch and hum starts. Could this be the Clutch fan?


No, By pushing in the clutch to stop the hum all you are stopping from turning is the transmission and ( transfur case if 4 wheel drive ) the engine is still running ..and some parts in the rear differential . I have had 4 nissan pickups and currently drive a 1995 pickup, without actually hearing the noise I would look toward the transmission, these Manual transmissions are very prone to bearing failure. This has happened to 2 of the one's I have had including the one I have now. You can also see as time goes by if the noise is quieter in fourth gear than others because this is direct drive and not as many trans bearings are involved Good Luck

Oct 22, 2010 | 1994 Nissan Pickup

1 Answer

Clutch makes a god awful noise anytime i push i in any ideas. It shifts fine just a loud noise when its being engaged.


Its time for a new Clutch. That noise your hearing is the throw-out bearing. Pretty soon you won't be able to shift at all.

Mar 31, 2010 | 1995 Nissan Pickup

1 Answer

93 toyota 4wd makes loud noise when i push the clutch in.


you may have a "throwout bearing" problem. the mechanic is WRONG. you will need to take the trans out and most likely replace the clutch components but the problem is not in the trans.

Oct 09, 2009 | 1986 Toyota Pickup 4WD

1 Answer

1981 toyota 4x4, making noise


check the universal joints on the drive shaft sometimes they won't appear loose but are full of rust and will get noisy, grab the drive shaft and push up and down hard to check for play

Jul 02, 2009 | 1983 Toyota Pickup

1 Answer

04 toyota corlla 5 speed


If there is only one click when you go into first or reverse. Then look at the linkage on the clutch pedal. If you push the clutch pedal down and up (without putting it into gear) does it still make the click sound? Is the transmission going into gear normal? Is the throw-out bearing making any noise? A throw-out bearing can make a loud click noise.

Jun 18, 2009 | 2004 Toyota Corolla

1 Answer

Front differential making a winding noise and ends in a loud thump.


sounds like you need your transfer case looked at and repaired.....that the only thing i can think of...hope it helps :)

Sep 30, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...