Question about 1995 Jeep Wrangler

2 Answers

JEEP WONT START

THE GAS GAUGE WILL GO ALL THE WAY TO FULL AND THE JEEP WONT START. I ALREADY REPLACED THE CRANK SENSOR, FUEL PUMP, IGNITION SWITCH BUT I STILL HAVE THE SAME PROBLEM WHEN THE FUEL GAUGE GOES TO FULL THE JEEP STALLS. DO YOU KNOW WHAT COULD BE WRONG?

Posted by on

  • Anonymous Apr 09, 2009

    Fuel gauge went to full,....engine won't start now.....anyone know of a solution?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 2,899 Answers

Check the Main Relay and fuse

Posted on Apr 22, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 61,037 Answers

Sound like a connection (loos of the ground circuit) problem to the in tank fuel pump, I wouls suggest you check all the connections from the fire wall back for any loose or corroded connectors.

Posted on Sep 22, 2008

  • yadayada
    yadayada Sep 22, 2008

    Well what do you think is the problem??? I tried to help and you gave me a zero rating.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Need to know why won't get no spark...changed ignition module, ignition coil, cap and rotor still not firing. ....any ideas


What make vehicle ? year an model too ! Before you replaced those parts did you check for battery supply voltage an check the ground for those components ? You need to get a wiring diagram an see what get's voltage an what is ground ! An see what all is involved , crankshaft position sensor , ECM / PCM -engine computer etc...! Then you need a DVOM - digital volt ohm meter to test ! Your looking for a quick fix an doesn't work like that !

Sep 06, 2015 | Cars & Trucks

1 Answer

2000 jeep wrangler won't start, good crank, no bus


Check fuses first, but could be needs new CPU

Jun 14, 2012 | 2000 Jeep Wrangler

1 Answer

1987 jeep comanche with4.0 will crank but wont idle i have already changed tps and idle air control valve and checked fuel pump and changed fuel filter and checked vacume lines with no change what else...


have you checked the crank position sensor? when this baby goes the engine will start and run for one or two seconds then die like its out of gas.

Also the ignition switch may be suspect.

Oct 14, 2010 | 1987 Jeep Comanche

1 Answer

2001 Jeep Cherokee - Cranks won't start - Gas gauge "E" w/gas


Disconnect and replace fuel filter.With filter disconnected have someone momentarily turn key to on position to see is fuel pump is working.Make sure you have lots of rags,a drain pan and safety goggles on

Sep 11, 2009 | 1993 Jeep Grand Cherokee

2 Answers

I have a 1997 JGC V6 lately I noticed that the gauges don't work when the key is in the run position and the jeep wont start. If it sits for a while then I turn the key the gauges come on and the jeep...


Are you the only driver for this vehicle?
Next time when you refill up,DO NOT TOP OFF THE GAS.
When the gas pump stop,just let it stop. DO NOT TRY to put more into the take.
When topping off,the fuel sensing float is push BEYOND it limit. It will create a short on the wiring to the gauage.
Please ran few tank WITHOUT TOPPING off and see does the flow return to normal and not creating a short.
The fuel pump and gas level sensor is in the same unit. It's costly to pull the gas tank down and replace it.

Aug 26, 2009 | 1996 Jeep Grand Cherokee

1 Answer

JEEP STALLS WHEN TEH GAS GUAGE GOES TO FULL WITH ONLY A HALF A TANK


My first thought would be that there is a short in the system dealing with the guage itself.

Eshel

Sep 22, 2008 | 1995 Jeep Wrangler

4 Answers

96 jeep grand cherokee wont start


my 1996 jeep is doing the same thing.the fuse I have been changing is under hood in fuse panel on left 20 amp sm. in center of fuse panel closest to bat.

Aug 21, 2008 | 1996 Jeep Grand Cherokee

3 Answers

1999 jeep tj cranks but wont start


replace the crankshaft position sensor

Aug 16, 2008 | 1999 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...