Question about 2005 Ford F 250 Super Duty

1 Answer

No Start Condition On our F250 Power Stroke.

We currently replaced the EGR & ICP sesnor on our truck we are maintanting and still have a no start condtion. Need asistance.

Posted by on

1 Answer

May not help but my 05' 6.0 did a no start situation with out any prior conditions and it was bad news High pressure oil pump 2870.00$ and a week at the ford shop and i think maybe they bent one of my branch tubes because ive had a lack of power ever since.

Posted on Oct 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Our truck just died and wouldnt start. we


diesel or gas engine. if you have a power stroke, look at powerstroke.org

Jul 04, 2009 | 1995 Ford F350

1 Answer

Change the ICP on 2005 F250 6.0 superduty


remove the rh valve cover, unscrew the sensor, replace the valve cover.

May 28, 2009 | 2004 Ford F250

1 Answer

2001 F250 power stroke 7.3 liter turns over but won't start


did it start up easily right away?
Has it happened more than once?

Apr 15, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Change the ICP on 2004 f250 6.0 deisel


you can change it without removing the turbo, its a pain but you can do it I have a socket I ground down to fit the sensor just right and with a long extension and a universal you can remove it

Apr 04, 2009 | 2004 Ford F250

1 Answer

2005 F250 Super Duty Power Stroke 6.0


It sounds like your EGR valve is sticking, the EGR valve position sensor is bad or the EP sensor is bad.

Jul 10, 2008 | 2005 Ford F 250 Super Duty

1 Answer

P1211 DTC


Loss of power, usually after a hard acceleration; Rough idle; Check engine light comes on, DTC P1211:
Intermittent high pressure oil leakage.
This condition usually occurs when the vehicle is cold and the oil is thick. When performing a hard acceleration, the truck suddenly looses power, the check engine light comes on, and once returning to idle the engine runs rough and won't accelerate. Cycling the key may correct the concern, clearing the code from the PCM will correct it temporarily. If you can monitor data stream, at idle the ICP pressure normally is 400-700 PSI and the IPR duty cycle is 9-14%; at cruise, ICP is 700-1200 pSI and IPR is 15-20%; under normal acceleration, ICP is 1200-2000 PSI and IPR is 20-30%; and under WOT accel, the ICP is up to 3600 PSI and the IPR is 35% or higher. When the above symptom occurs, typically the idle ICP reading will be normal, but the IPR duty cycle will be high--over 20% and up to the max 50%. A "blow-by" condition has occured somewhere in the HP oil circuit. If you can get the problem to re-occur with some frequency, the most probable cause is worn or deteriorated injector or IPR o-rings. If the problem is intermittent, it could be a sticking IPR valve. Replace the injector o-rings with the latest-level kits--F8TZ-9229-AA. When replacing the IPR, make sure you get the correct part for the build date/serial number of your engine.

Jun 04, 2008 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...