Question about 1999 Mercury Sable

1 Answer

Radiator drain I can't find the drain on the radiator. It is a 1999, 3.0 engine, please help!!!!!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

The drain is on the drivers side on the bottom it is a round plug that you have to unscrew it has an O-ring too so don't lose that. this should help..please rate this

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the coolant drain plug in a 1999 dodge durango


remove the lower radiator hose it's safer than breaking the drain plug

make sure the engine is cooled off first

Sep 22, 2014 | 1999 Dodge Durango

1 Answer

What is proper method for flushing the radiator and engine in a 1999 Pontiac Montana?


1: Drain coolant system
2: Purchase coolant flush, making sure you have the proper amount for your size of coolant system
3: Pour coolant flush into your radiator, filling the rest with water
4: On the coolant flush bottle it will tell you how long to run your vehicle
5: Once done running, let cool enough to open radiator cap, and drain system COMPLETELY by first draining out of pep **** on radiator, then taking one side of the hoses off the radiator and draining those
6: Put hoses back on and fill system with coolant. When the fluid gets to the top of the fill port on radiator, start vehicle and let run, allowing air to escape the system, and fill as necessary

Oct 27, 2012 | 1999 Pontiac Montana

1 Answer

Where is the radiator drain plug on a 1999 chrysler 300M?


It will be located at the bottom of one of the radiator side tanks. One tank acts as the transmission oil cooler, and the other for engine coolant. The mechanism used to open the petcock will be facing the engine compartment. Typically it is a round knob that you turn counter-clockwise. Some require you turn and pull outward at the same time. Those only require about a half turn max and will not turn any more, but will drain the radiator.

Oct 07, 2012 | 1999 Chrysler 300M

1 Answer

Were trying to find the radiator drain plug on a 1996 plymouth breeze, can you help locate it? thanks


The Drain **** is located on the bottom Right (passenger) side of the radiator. Turn counterclockwise to drain. Do not turn drain **** more that 1/2 turn or damage may occure. NOTE: To open draincock on vehicle equipped with 2.5L engine, use a 3/8 inch drive extension 3" long, a 19mm socket with universal. good-day !

Aug 28, 2011 | 1999 Plymouth Breeze

2 Answers

I am trying to drain the cooling system on my 1999 Passat 2.8. I am having problems figuring out a way to drain old coolant from engine block. I can't find the water pump drain plug or any plug...


hello.
there is a very small kind of screw just in the lowest part of the radiator, just remove it.
if you don't see this so clear just do it disconnecting the big lowest hose on the radiator,
hope this help you...

Jun 30, 2011 | 1999 Volkswagen Passat

1 Answer

Where is the radiator drain plug located on a 740il BMW 1999


For 1999 BMW 740IL 4.4L EFI DOHC 8cyl drain the cooling system (on some engines), this requires removing the plug from the bottom radiator tank.

Good luck.

Mar 16, 2011 | BMW 750 Cars & Trucks

1 Answer

How to properly drain engine coolant


Get a large drain pan ready and remove the radiator cap when the engine is cold. On the bottom of the radiator there is a pitcock which is usually plastic that is screwed in the drain hole. Slowly remove it until coolant comes out. Once you remove it completely coolant will come out quickly. Once it is drained remove the lower radiator hose to drain what is left. This will drain 85% to 90% of the coolant.*** Please rate me on this answer.***

Jun 06, 2010 | 1999 Ford Expedition

2 Answers

How do you drain coolant in a 1999 Chevrolet Suburban? specifically from the engine block?


The easiest way to drain coolant from engine is to remove lower radiator hose from water pump and let it run out. There are no drains on the engine.

Sep 07, 2009 | 1999 Chevrolet Suburban

1 Answer

How do i drain the radiator and flush out on a 1999 chevy blazer?


open the drain valve on the bottom inside of the radiator, run the engine with the garden hose in the radiator cap, have the heater switched on high temp.  After the water comes out clean, turn off engine and let all water drain out.  Replace with 50/50 mix if distilled water and antifreeze.  Collect old antifreeze as it is very toxic and poisonous. 

Mar 11, 2009 | 1999 Chevrolet Blazer

1 Answer

Radiator Drain Plug for Camry 99.


depends on what motor you have, it'll either be on the bottom of radiator (you might have to move the cover to get at it) or in the rear of the engine block. if you get at them i'd simply just remove the lower hose from the radiator. just make sure car is compleatly cooled down first.

Dec 01, 2008 | 1999 Toyota Camry

Not finding what you are looking for?
1999 Mercury Sable Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...