Question about Chevrolet Tracker

1 Answer

1999 chevy tracker 2.0 engine with auto transmission. 4 wd shifts fine into the transfer case but will not engage in the front pumpkin. the front drive shaft spins but the front axles do not.

Posted by on

  • 4 more comments 
  • Anonymous Nov 25, 2008

    same prob except mine is 02

  • Garys33Heate Dec 01, 2008

    20000 tracker std. shift front wheels do not turn light on dash for 4-wheel do not light

  • Anonymous Feb 12, 2009

    same type of problem , but the 4 wheel drive light is flashing on and off

  • Anonymous Mar 15, 2014

    Front axle not engaging on my 1980 chevy cheyenne do u know what the problem is?????

  • Anonymous Mar 20, 2014

    With transmission in neutral, clutch depressed, I couldn't get the transfer case shifter to engage the 4 wd... am I doing something wrong?

  • Anonymous Mar 25, 2014

    CHEVY TRACKER SLAMS IN GEAR WHEN PUTTING IT IN 4 WHEEL DRIVE

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Chevrolet Expert
  • 293 Answers

Check the front acuator hooked up at front axle

Posted on Sep 22, 2008

  • charles daigle
    charles daigle Oct 24, 2013

    yes i already did replace that part but i went to a garage and it gave me a co321 code which is transfer case lock malfuction !!!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Ford Explorer front end makes noises after putting it in 4wd lo and red lining the engine, whats wrong with it?


You have to be in park or be in drive or moving slowly to
engage 4 wd

You can not have the trans in neutral to use 4wd or have the
transfer in neutral to shift trans

Either combo you grind gears in trans or transfer

Dec 12, 2012 | 1996 Ford Explorer

1 Answer

My 1999 chevy blazer 4wd just quick working it engages but doesnt work? please help need answer fast


Check the actuator under the battery. make sure that it's working and pulling on the cable to lock the front hub. If it is and the front wheels are not locking then the clip at the front pumpkin (differential) may be broken or the fork that engages the axle. If everything looks good and the actuator is not working, inspect the vacuum line to the 4wd vacuum switch on top of the transfer case (drivers side) and then work your way to the vacuum line to the engine compartment. There is a T vacuum line by the ABS unit on the drivers side and inspect the lines there and the vacuum canister in the fender. Good luck and keep me posted and hope it's a simple vacuum line that went bad and not the front pumpkin.

Feb 02, 2010 | 1999 Chevrolet Blazer

1 Answer

How does my 4x4 push button locker work in my 1989 chevy K1500?


That depends a lot on how your truck is equipped. GM uses several different 4 wheel systems including AWD, Part-Time 4WD, Full-Time 4WD, and ON-Demand AWD. Then there is another version used on some trucks that is a combination of 4WD and On Demand AWD. - it gets a little confusing but each system as slightly different charachteristics.

Genericly speaking, if you have the push-buttons on your dash that say "4-HI", "4-LO", and "2HI" and/or Auto-4WD , the transfer case has an electronicly-controlled stepper motor which shifts the transfer case into the selected mode. An electric solenoid/actuator then engages/disengages the front differential for 2-Wheel or 4-Wheel modes. One push of the button and it shifts the transfer case and engages the front differential.

That's much easier than the old days when you had to stop the truck, get out (Sometimes in the middle of a big mud hole) and lock the front hubs then get back in and play with the lever in the floor to get the transfer case to shift into the desired mode.

Oct 22, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How much transmisson fluid does a 2000 tracker take?


Well we don't know what size engine your vehicle has or weather it is a auto transmission or manual but here are the capacities.
Auto transmission
4 speed- 4wd 7.5 quarts
4 speed 2wd 7.8 quarts
Manual transmission 2 wd 4.0 quarts
Manual transmission 4 wd 3.2 quarts

this information is for 2.0L 4 cylinder engine code (C) DOHC
if you need information for 1.6L then send me a message back and I will give you the info.

Sep 14, 2009 | 2000 Chevrolet Tracker

1 Answer

1996 Chevy 4X4 Problem with Transfer Case & Transmission?


check vaccum actuator on front diff?use vaccum gauge should be 25 to 30lbs to open had same problem 94 gmc sierra ext cabb 4x4 5.7 ordrive tranny

Mar 12, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1992 4Runner 4wd will not engage


check the wires from the shifter for the transfer case they maybe discounected like mine were now mine works fine

Feb 25, 2009 | 1994 Toyota 4Runner

2 Answers

Transfer case wont engage


shift into 4wd and move truck a couple of feet.
if light is still off, park truck block the wheels set the park brake jack right front wheel and try to hand spin the wheel if wheel doesn't turn 4x4 is functioning properly but there is a wiring problem use an ohmmeter to check the 4x4 switch wiring fuse and bulb
if wheel turns freely the front axle or transfer case is not engaged
attempt to hand spin the front driveshft if the driveshaft will spin the transfer case is not engaged check the transfer case shift linkage, problem is in linkage or transfer case internals
if the driveshaft will not spin the transfer case is engaged properly
with trnsmission in neutral or park start engine measure vacuum on the two vac lines at front axle shift motor . one line should have approx 20" vacuum. other line should have none
if no vacuum measured look for vac leak or bad vac switch
if both lines have vac look for a bad vac swithc or ruptured cad actuator diaphragm
if one line has 20" +- VAC
move transfer case lever to 2wd measure vac again lines should have swapped vac signals
if no vac switch bad or 4wd shift likage needs adjusting
if yes vac motor bad or stuck or shift fork stuck
remove vac shift motor from the axle attach vac lines to shift motor engage disengage 4wd
does shift motor plunger move at least 1/2 inch
no shift motor bad
yes check axle shift fork and vac motor for binging

Jan 27, 2009 | 1999 Dodge Ram

1 Answer

4wd 1999 chevy 2500 will not engage


1999 chevy 2500 ??? Come on a warranty , get real . Did you have the 4X4 system checked for DTC'S - diagnostic trouble code's ? Can set a few .
DTC B2725 ATC Mode Switch Circuit Malfunction
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0323 T-Case Lock Circuit Low
DTC C0324 T-Case Lock Circuit High
DTC C0327 Encoder Circuit Malfunction
DTC C0367 Front Axle Control Circuit High
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0387 Unable to Perform Shift
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error

The range/mode switch circuit consists of four normally open switches. The automatic transfer case control module supplies a regulated 8 volt DC to the switch through circuit 431. The switch has circuit 1693 to return current to the automatic transfer case control module through a 9.09K ohms resistor located inside the switch.
The transfer case shift control module constantly monitors this signal voltage to determine the condition of the mode switch circuit. If no buttons are pressed, and the transfer case shift control module detects a voltage level outside the possible range (approx.-0.5 to 1.0 volts) for longer than 5 minutes, the transfer case shift control module will set this DTC or if a button is held down or sticks for a period longer than 5 minutes.
When each of the switches is depressed they will complete a circuit through their own specific resistor. The transfer case shift control module continuously monitors the switch input to determine whether the 4HI, AUTO 4WD, 2HI, and 4LO button selections are made by the driver. Neutral may be obtained if the following conditions are met:
• The engine is running.
• The automatic transmission is in neutral (or the clutch pedal is depressed on a manual transmission application).
• The vehicle speed is below 3 MPH.
• The transfer case is in the 2HI mode.
Once these conditions have been met, pressing and holding both the 2HI and 4LO buttons for 10 seconds will shift the transfer case into neutral, turning on the red neutral indicator lamp.
If you are not familiar with these electronic systems ,I suggest you take your vehicle to a qualified repair center .

Nov 09, 2017 | 1985 Chevrolet S-10 Blazer

2 Answers

Noise in transfer case or front differential


i had the same problem.. it is the vacuum switch on the transfer case. the switch is stuck open and supplying vacuum to the vacuum diaphram under the battery box. the switch is located on the upper side of the transfer case ( not the front differential) which is located driver side of the transmission. the switch cost me about $25.00. I replaced it myself. if you do your own mechanical work you can get it done just be patient.

Oct 01, 2008 | 1999 Chevrolet S-10 Pickup

1 Answer

Chevi blazer 1999 transmissioin shift problem


1- STOP THE VEHICLE
2- MAKE SURE IS IN NEUTRAL POSITION
3- ACTIVATE 4WD (HIGH) MODE( MANUAL OR ELECTRONIC SWITCH SELECTOR
4- MOVE LEVER SHIFT TO ''D' DRIVE POSITION
IF THIS DOES NOT RESOLVE CHECK TRANSFER CASE SWITCH

Aug 03, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

794 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...