Question about Honda S2000
Flasher relay is not a relay, it was a bimetal strip that heats on current flow, bends, breaks the circuit, cools straightens.
For LED lamps that do not draw enbough current to heat a bimetal, replace the old flasher can with an electronic flasher circuit,
This url http://automotive.hardwarestore.com/87-543-automotive-flashers.aspx shows both the old thermal type and new electronic type and is a place where it can be bought
Posted on Sep 22, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 06, 2015 | Cars & Trucks
Apr 28, 2015 | Cars & Trucks
May 07, 2014 | Cars & Trucks
Feb 20, 2014 | Ford Cars & Trucks
Jan 06, 2014 | Toyota Tacoma Cars & Trucks
Nov 04, 2013 | GMC Cars & Trucks
Turn on the Durango and check each of the four turn signals
to make sure that the bulbs are not burned out. If you find one that has gone
out, replace the bulb and retest the turn signals. When a bulb goes bad on this
circuit, the resulting operation can mimic a bad flasher or one that is
Locate the combination turn signal flasher and relay. It is
on the left end of the driver's dash. Open the access door and view the
collection of relays and fuses. At the left side of the mounting block is a
larger flasher and relay. This is the combination turn signal flasher and
the relay by placing you finger on the relay housing and activating the turn
signal. If you have found the right one, you should feel a clicking as the turn
signal blinks. Remove the relay, replace with the new relay and close the
Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.
Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks
Nov 18, 2011 | 1998 Chevrolet Camaro
May 27, 2010 | 1993 Buick LeSabre
366 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: