Question about 2005 Dodge Neon

1 Answer

Brakes wont bleed on right side front put new pads on

Posted by on

  • Anonymous Mar 23, 2014

    put new caliber on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

There should be no need to bleed the brakes after installing new pads! It seems like you have pushed the brake peddle beyond its normal travel! This will cause the rubber parts inside the master cylinder to get torn from normal dirt that gathers. After changing pads, the peddle should be just gently pumped no more than half way down. Let me know how you make out! Frankster016

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brakes wont bleed


bleed it with key on

Jun 28, 2012 | 2005 Hyundai Tucson

1 Answer

I have a F150 p/u 2000 for 10yrs. Each year I change the brake pads. But the rear pads still looks like new. The front pads are worn down. What can be causing the problem?


normally, you replace the rear brake pads every other change in the front brake pads. for your case, it seems that the front brakes are the only ones working.

bleed your brakes to check if rear brakes are still working. after bleeding, check your brake master if it puts pressure equally to the 4 brakes.

Aug 05, 2011 | Ford F-150 Cars & Trucks

1 Answer

Need to know how to change brakes rotors and calibers on 1996 gmc jimmy


Hi Friend:

#1) Break Loose your Lug Nuts,Just A Little don't Take-them off yet.

#2) Jack Front end off the Ground,Support with Good jack stands,Keep Truck in Park and Emergency brake Applied.

#3) Now Take off your Front Wheels-Tires.

#4) Now on the Inside of your brake rotor on each side,there are 2-Caliper mounting bolts. Allen Bolts 3/8" Allen Socket or Allen Wrench.Break the 2-Bolts loose and Remove them.

#5) Now after the Caliper Bolts are removed ,Loosen the Brake Line going to the Calipers using a Flare wrench.You'll need to have a Drain Pan handy to Catch the Brake Fluid.

#6) Now you'll need a C Clamp ,to compress the caliper piston back in the Caliper. NOTE: before you compress the Caliper pistons ,take off the master cylinder cover and using a suction bulb remove about 1/2 of the fluid from the Front Resevoir.the larger of the two.

#7) Now placing the C-Clamp over the Caliper housing turn it clockwise to compress the Piston all the way in.

#8) now you can remove your caliper and the pads,same for Both Sides. AND remove your Rotors they are held on by the Calipers and your Lug-Nuts.It Should come right off ,if its a little rusted and Stubborn take a Plastic Headed Hammer and Tap it all around the Old Rotor.Until it comes off.

#9) Now Slide your new Rotors on the HUB and over the lug nuts.

#10) Get your new caliper Making sure you have the Correct Caliper its Marked Left or Right Sides. It will only work on the Side its made for.

#11) Now put your Anti Rattel Clips on the Correct Sides(Inside) that fit into the New Caiper Piston.also use some brake lube on the back on the new brake pads where they touch the caiper housing.

#12) With both pads in the Caliper Slide the Caliper over your New Rotor. This is for both sides.

#13) Put your brake line back on using the new brass washers that came with your rotors/or Caipers.

#14) Now Put your Caliper Mounting bolts in and tighten up to 38 Foot Lbs.

#15) When you have both sides done Fill up your master Cylinder about a 1/4 " from top.

16) Now you'll need to bleed them ,Get a Friend and have them Slowly push the brake pedal down,after he says its down you open the bleeder valve until fluid and air come out==Now tighten it back before your friend raises his foot up off the pedal.During bleeding keep checking your Master Cylinder to keep it full of fluid.

#17) Start your bleeding from the Right Rear to Left Rear to Right Front and Last Left Front. Always bleed from the farthest brake or Wheel from the Master Cylinder and work your way to the Master.

#18) After you have No air coming out of the bleeder valve and you do have good clean brake fluid.Your Done Bleeding;You should have a Good tight and High Brake Pedal. NOTE: you DON't start the Truck to bleed the brakes.

#19) Now just Put your Tires back on and Tighten your Lug Nuts and you should have good Brakes.

I'm sure that this will get you good brakes and on the Road Again.

Thanks for Using Fixya Please let me know How my Solution Helped you by Voting For the Quality of my help.

Thanks Again: From: d_hubbs

Aug 27, 2010 | GMC Jimmy Cars & Trucks

3 Answers

Just taken the old brake pads off the car and the pistons wont move in order to get the new pads on


With the new pads in place, loosen the bleeder valve a few turns while applying pressure to the pads. A small amount of brake fluid will likely spray out as the pads and pistons move, so have a pan or a rag ready. Once the pads are flush with the edges of the caliper, retighten the valve - making sure that the pads don't move.

Nov 08, 2009 | 2004 Jaguar X-Type

2 Answers

Brake are pungy on04gmc envoy


it would sound like your master cylinder if you did bleed your brakes right.

Aug 25, 2009 | 2004 GMC Envoy

1 Answer

Just put new brake caliper on front driver side


Gravity bleed caliper, just open valve and have a coffee break and close it. Did you buy a loaded caliper with new pads on it? Check the rear wheel cylinders they may be the cause of your mushy pedal. They are cheap too.

Jun 09, 2009 | 1992 Oldsmobile Cutlass Ciera

2 Answers

Changed front brake pads. brake pedal goes to floor. no brakes


Something doesn't sound right, you shouldn't have to remove the brake line to install pads. Did you have to do this on both sides? Do the new pads and the old pads look the same? Did you get the caliper on crooked? Just recheck your work first before replacing more parts. When you install the caliper, You have to hook the pad on one side first before you slide it over the rotor.

Mar 26, 2009 | 2000 Jeep Grand Cherokee

1 Answer

No brakes after changing brake caliper & bleeding system


Sounds like you still have air in your brake lines. Make sure all your brake lines are tight. Then bleed again. Bleed the trouble side first, meaning right side, then go to front left, back left then back right, make sure that your brake fluid is also full

Feb 11, 2009 | 2004 Toyota Tacoma

1 Answer

Brakes


All you have to do is take the calipers off crack open the bleeder of the side you are working on leave the old pad in the caliper and press the pad in as far as it will go tighten bleeder clean the rotors with brake clean to get the oily substance off they put on during shipping to keep them from rusting put rotor back in place and put new pads in caliper if they give you grease for the caliper sliders put some on the caliper bolts and sliders the thing the bolts go into on the caliper so they move fairly easy this way your brakes will work better and last longer put caliper back in place tighten caliper bolts snug usually with a ratchet like a good 3/8 ratchet then do the other side fill up the master cylinder with proper brake fluid usually dot3 but should say on master cylinder cap bleed brakes if you did just the front bleed the passenger side first pump pedal a few times dont go all the way to the floor have someone open the bleeder on the right front passenger front while holding pedal down with just a little pressure one foot on pedal one under pedal so it dont go to the floor then do the same for the other side check fluid start vehicle if pedal is good go for a test drive and thats it.

Jan 06, 2009 | 2005 Ford F-150

Not finding what you are looking for?
2005 Dodge Neon Logo

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...