Question about Chevrolet Blazer

1 Answer

How I can change the motor for the window on the driver side

Posted by on

  • 1 more comment 
  • nvgulli Jan 08, 2009

    Is there a step by step procedure to replace the window motor on the driver side of a 2000 Blazer?

  • billathelea Mar 24, 2009

    How do I change the motor on the drivers side window of a Chevy 1995 Camaro?

  • cookie0919 Apr 26, 2009

    After I get the door panel off, I can't seem to find the screws to get the window motor out

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You have to remove the panel or if you have screws holding the units in remove them and pull the cover off

Posted on Sep 21, 2008

1 Suggested Answer

wolfer987
  • 3 Answers

SOURCE: Drivers Side Rear Window Electric Motor Removal

The local dealer was very helpful in figuring this problem out. There is a clip in the ball part of the arm. When removed, the arm releases very easily.

Thank you anyway
Rob

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cadillac window repair


Try changing window switches from known good door. Make sure fuses are good!

Mar 07, 2014 | Cars & Trucks

1 Answer

2003 chevy impala driver side window is stuck down


the window motor is inside the door behind the door panel...it can be tricky changing it out so id recommend, after getting the replacement motor, taking it to a mechanic to change it out

May 14, 2013 | Cars & Trucks

2 Answers

Windows on Rear Driver side and Rear Passenger side stopped working


sounds like you have a bad swith in the drivers side handle pull out switch board and check for power on those only when turning in down and on position should see power if not bad switch never heard of two motors going bad at the same time

Jul 16, 2010 | 2001 Dodge Durango

1 Answer

My driver side front window does not come down but the passanger side front and back and driver back do go up and down. Do i need to change the power window motor or is it the window regulator for driver...


regulator usually wears out and breaks or gets bound and burns up motor, change them both if available. Good sign of bad regulator is sloppy window in track, or window off track. I always replace them together if they are available. it is possible that you just need a switch, but most likely the reg/motor.

Apr 15, 2010 | 2000 Daewoo Nubira

3 Answers

1999 Dodge Durango driver side window does not roll up nor down.


Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Jun 08, 2009 | 1999 Dodge Durango

2 Answers

2002 Nissan Xterra drivers power window wont roll down


Quite possibly yes...I would first check any relays and/or fuses just in case.  A few dollars for a fuse or relay is much cheeper than say $100.00 and a few hours of labor.  
You can purchase just the window motors from any major auto parts stores.  You can also purchase the window motor with the regulator.  The regulator is kind of like a rope and pulley system to lift the window up and down and the motor is attached to this assembly.  It is a little more expensive but I would change both.  I always change both just in case the regulator is bad and it isn't the motor.  You will have to remove the plastic interior of the door in order to change either the motor or the motor/regulator assembly.

Any questions, feel free to ask!

Feb 04, 2009 | 2002 Nissan Xterra

1 Answer

Drivers Side Rear Window Electric Motor Removal


The local dealer was very helpful in figuring this problem out. There is a clip in the ball part of the arm. When removed, the arm releases very easily.

Thank you anyway
Rob

Nov 09, 2008 | 1998 Dodge Caravan

3 Answers

2000 GMC Jimmy SLE driver's power window


The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.

Sep 27, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...