Hello, I’m Eddie from California.
I have a 1997 Chevy Astro van and when I have my A/C on and accelerate the upper vents go of and the bottom goes on, when I reduce acceleration the upper vents go back on, What do you think the problem is?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1999 CHEVROLET TRUCKS ASTRO VAN 4.3L 6-cyl Engine Code [W] CAPACITIES:Automatic Transmission, 4L60-E Initial Fill..........4.7 liters Automatic Transmission, Total Fill 4 speed 4L60-E..........10.6 liters To check fluid level, transmission should be hot and engine running at idle. Pull the transmission dip stick out "red" wipe clean and re-insert. Check level of transmission fluid as indicated on the dip stick using the second reading and make sure the Astro is parked on leveled ground. Add Dexron III or VI as needed and do not over fill. Thank you for using Fixya and good luck
You are right to be concerned about this behavior since it can definitely increase your stopping distance.
Either your cable has eaten its way into the inner tubing and is hanging up, or the mechanics at the throttlebody needs some lubrication.
With no engine running, have someone inside to press on the accelerator while you watch for movement of the linkage under the hood.
Once you have located it, operate it by hand to see how it feels. If the linkage does not return to the stops provided, then use a heavy-duty penetrating oil to soak the moving parts.
If it still hangs, then the cable needs replacement.
With the engine running, tranny in Park and the parking brake on, after you have lubed the visible linkage, have some one inside press on the gas and watch the linkage to see if it now returns to the mechanical stop.
Carefully move it by hand to see if it is truly at the limits of its travel where it should be at an idle.