Question about 1988 Nissan Pathfinder

1 Answer

1988 nissan pathfinder headlights won't work fuses are good switch has been replaced

Posted by on

  • jazza78 Sep 29, 2008

    i also have the same problem with my D21 Navara, do your high beams work? if so it sounds like an earthing issue.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

Check the harness and the ground connections, and although this may sound stupid, have you checked to see if the bulbs are burnt out?

Posted on Oct 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlights are not working what to do


Start with the fuse box located under your hood. Open it and check the headlight fuse or fuses. If they are good, change the headlight relays.

Jan 16, 2013 | 1991 Nissan Pathfinder

1 Answer

97 Nissan Pathfinder dash lights aren't working AND the alarm to turn off the headlights isn't working either.


i know this sounds crazy, but do you have break/tail lights?some cars shut off dash lites when tail/brake lights dont work

Jan 11, 2013 | 1997 Nissan Pathfinder

1 Answer

Gauges,Radio,wipers and headlight won't work.


Sounds like you have at least one blown fuse. Check the fuse panel, It's on the driver's kick panel next to the dead pedal (where you rest your left foot) to the left. of the clutch. The cover for the fuse panel faces the center of the car.


Here is a picture of a good and blown fuse:

1_9_2013_12_19_57_am.gif

Jan 09, 2013 | 1988 Nissan 300ZX

1 Answer

Can't get the fuel pump to work. put a new pump and relay and it still want work any suggestion. it's on a 1988 nissan pathfinder


I would recommend that you check the fuse panel. Take the fuse out and replace it w/ a new one.

Dec 04, 2011 | 1988 Nissan Pathfinder

1 Answer

Just bought 1988 pathfinder and am having some tail light issues. When headlights are off and I brake, the left brake light is the only one that works. When headlights are on, both rear running lights...


Hi, There are several possibilities that I can think of:
a) The incorrect bulbs were inserted into the sockets for the brake lights.
b) The correct bulbs were inserted incorrectly into the sockets for the brake lights.
and
c) Faulty wiring work was done to the vehicle, such as after an accident.
I was unable to get the bulb information on line. So here's is what you can do.
If you have the owner's manual it will specify which bulbs work correctly. If you
don't, go to a local auto parts house, such as Advance, Autozone, etc.
They will be able to recommend the correct bulbs you need.
I would check you existing bulbs and also, at the same time check to see if they are inserted
correctly.
Hope this helps,
Mark

Jan 19, 2011 | 1988 Nissan Pathfinder

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

My 1988 Nissan Pathfinder


yeah disconnect the alarm system from the car..... so many time when this happens the alarm system for some reason keeps the car from starting. if you can disconnet he alarm the car should start.

Jul 21, 2008 | 1988 Nissan Pathfinder

1 Answer

1988 Nissan Pathfinder


I had a 1994 pathfinder with the same problem. Direct wire the load pin on the starter solenoid to the positive terminal on the battery with a push-button switch between and mount it on the dash of the car. You will also need to disconnect the existing wire on the load pin of the solenoid and tape it up. This will allow you to engage the starter without the key using the push button, however, you will still need to crank the key to the start position while turning the motor over to give you fuel pressure.

Maybe a temporary solution for you but its worked on my pathfinder for more than 2 years.

Kyle

Jul 21, 2008 | 1988 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...