Question about 1994 Hyundai Excel

2 Answers

Starting my vehicle

My 1994/95 model 2 door xs3 series excel, only starts when u have the cluth in, is there a way this can be bypassed so i do have to be in the car foot on clutch to start it,

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 111 Answers

No its a safety feature and should be kept alone

Posted on Sep 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 5,568 Answers

If you will buy a Haynes or Chilton aftermarket service manual at an auto parts store (or on line), you can probably locate the switch pretty easy.
I wouldn't advise doing it though; it is one of the better ideas when it comes to safety, otherwise a child could turn the key and create havoc if the car was not in neutral. I can't think of a circumstance when this is an undesirable feature. 

Posted on Sep 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Truck will not start anti theft will not shut off


The security light illuminates when that signal gets broken, or not seen at all. When the communication breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. (like it thinks it's being hot wired) The car shuts down because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. It will either turn off the starter, or the fuel injectors. The vehicle may run for 2-3 seconds before shutting down. This link explains it pretty well.
http://www.diy-gm-security.com/

26254226-z5kltnlu2m4dpb1ofs4h5vu0-1-0.jpg
Do It Yourself GM Security bypass

Aug 07, 2016 | 1999 GMC Jimmy

1 Answer

How do i bypass bypanti theft key on a 1996 dodge intrepid 3.3liter


Put the key in the drivers door and turn it like you are unlocking it. Are you sure your battery is not dead? Make sure its in park and your foot is on the brake when you try to start it.

Mar 08, 2016 | Dodge Cars & Trucks

1 Answer

How can I fix issue with Prestige asp57e remote start?


Return your Highlander to the local alarm shop and have them get the remote start working to your satisfaction.

Jan 28, 2016 | 2001 Toyota Highlander

1 Answer

No crank no start replace d starter and still same check relay its fine and have power to the starter


Check the neutral safety switch. Try jiggling the shifter or starting in neutral.

I don't know the make or model, but you can find a wiring diagram for the starting system online. There are ways to bypass the neutral safety switch to be sure it's the problem, but be careful if you do. The car can jump or even start in gear. Keep your foot on the brake when trying to start.

Also check if you have a security system and reset or bypass.

Mar 07, 2014 | Cars & Trucks

1 Answer

I need a radio wiring digram color code for 2009 chevy silverado


2009 CHEVROLET SILVERADO C1500 4DR TRUCK WITH 4.3L ENGINE AND STANDARD AUDIO SYSTEM

Remote Start
WIRE COLOR POLARITY LOCATION
Battery RED/WHITE (+) IGNITION SWITCH HARNESS
LOW CURRENT, FOR HIGH CURRENT USE RED/BLACK AT VEHICLE FUSE BOX
Ignition 1 PINK (+) IGNITION SWITCH HARNESS
Accessory 1 BROWN (+) IGNITION SWITCH HARNESS
MAY BE YELLOW ON SOME MODELS
Accessory 2 PINK/BLACK (+) IGNTION SWITCH HARNESS
FOR REMOTE START INTEGRATION
Starter 1 YELLOW/BLACK (+) AT MODULE UNDER HOOD BEHIND DRIVER HEADLIGHT
NOT FOR REMOTE START, FOR REMOTE START INFORMATION
Starter 2 PINK/BLACK (+) IGNITION SWITCH HARNESS
FOR REMOTE START INTEGRATION
Anti-Theft Type GM PASSKEY III® ANTI-THEFT SYSTEM
Anti-Theft Descript THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
Key Sense PINK (+) IGNITION SWITCH HARNESS
Tachometer WHITE (-) AT IGNITION COIL
Speed Sense YELLOW/BLACK (AC) AT ECM MODULE UNDER HOOD ON DRIVER FENDER
BLACK PLUG PIN #57
Parking Lights LIGHT BLUE (-) AT VEHICLE LIGHT SWITCH
Brake Lights LIGHT BLUE/WHITE (+) AT SWITCH ABOVE BRAKE PEDAL
IGNITION MUST BE ON FOR THIS WIRE TO TEST
Reverse Lights DARK BLUE (+) AT BCM MODULE UNDER DRIVER DASH
Horn TAN (-) IN HARNESS AT STEERING COLUMN
ALSO AT BCM MODULE UNDER DRIVER DASH
Modules
WIRE LOCATION
Please select another category
Doorlocks/Windows
WIRE COLOR POLARITY LOCATION
Power Unlock WHITE (-) AT BCM MODULE UNDER DRIVERS SIDE OF DASH
THIS WIRE UNLOCKS THE REAR DOORS ONLY, WILL REQUIRE A 5-WIRE SET-UP IN EACH FRONT DOOR TO INTEGRATE OR A SERIAL DATA MODULE FROM AN ALARM MANUFACTURER
PowerLock LIGHT BLUE (+) AT BCM MODULE UNDER DRIVERS SIDE OF DASH
THIS WIRE LOCKS THE REAR DOORS ONLY, WILL REQUIRE A 5-WIRE SET-UP IN EACH FRONT DOOR TO INTEGRATE OR A SERIAL DATA MODULE FROM AN ALARM MANUFACTURER

i would use a DLPK module

DLPK (2009 Chevrolet Silverado)
W2W
CC-Heated Seats Activation
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
PK-Immobilizer Bypass-Data No Key Req'd
RS-RAP Shut Down (Remote ACC Power)
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Front Door Pins
SS-Entry Monitoring Hood Pin
D2D
CC-Heated Seats
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
PK-Immobilizer Bypass-Data No Key Req'd
RS-RAP Shut Down (Remote ACC Power)
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Front Door Pins
SS-Entry Monitoring Hood Pin


Hope helps.

Mar 31, 2011 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

When anti theft light is blinking the car wont start. Can you bypass the anti theft device


On a 2003 Chevy Maibu the theft system light comes on and blinks when the system is triggered. The car will not start and the fuel pump cuts out. You must turn key to on and have all doors closed. Keep the key to on for 10 mins til theft light turns solid and then disappears. Then turn key to start and it should fire up.

Jul 01, 2010 | 2003 Chevrolet Malibu

1 Answer

Lost the remote, since the alarm was activated the car wont start even though i still have the key. everything turns on except the ignition. is there a bypass. i am stuck out of town.


1.try find on the drive's foot panel or under the steering wheel,see any switch. if you find the switch trun key on position and trun off the switch. 2. put key in passenger's door Lock it and Unlock , and put key back in the ignition try to start it. 3.turn key on position and unhood the (-) battery cable for 10 seconds , put it back and start. it.

Apr 15, 2010 | 1999 Toyota Camry Solara

2 Answers

Hyundai tucson 2 liter crdi gear box sound its a manual transmission


Hi there, the Common Rail Diesel Inyection (CRDI) 2000 cc 112 Hp M/T have a big trouble on cluth plate, and sounds very loud between 1500 and 2000 rpm on 2,3,4 shift.That motor has too much torque and cause excesive wear in the cluth roll and plate so starts roominess in the cluth system. You could change those parts but quickly the sounds come again. Hyundai is the resposable of that damage. I hope in the near future recall the CRDI model 112 Hp and replace the cluth.

Sep 20, 2009 | 2005 Hyundai Tucson

1 Answer

I have a hyundai excell sports and the mobulisor was not working thus i could not start it so i cut the wires but now when you turn the key nothing works how can i fix that without connecting the mobulisor...


Bypass the immobilizer system. You'll need the wiring diagram. Go to http://www.hmaservice.com/ and register. After you do this, you'll have access to manuals, service bulletins, wiring diagrams, etc.about your vehicle.

May 15, 2009 | 1989 Hyundai Excel Hatchback

1 Answer

1995 jeep gc limited runs then shuts off


The Chrysler factory VTSS vehicle theft security system will do just that. Try unlocking the vehicle with the remote or one of the three VTSS switches, both front doors or the rear hatch. Sometimes the door switches get damaged front "Slim Jimming" the lock. The rear hatch switch is usually intact. The VTSS should "Arm" after a battery disconnect or dead battery. The VTSS cannot be bypassed once it is activated. If you put a previously installed ECM that was on a vehicle with VTSS, on a vehicle without VTSS the vehicle will not run.

Mar 27, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Hyundai Excel Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...