Question about 2003 Ford Focus

1 Answer

Ball bearing and seal for a 2003 Focus

Hear a droning noise ,loud from front wheel

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Possibly a wheel beering...to diagnose a wheel beariing, listen closley when making left and right turns...when turning left, weight shifts to front right side, If noise increases, it may be a front right wheel bearing.... vice versa for right turns.

Please rate this,
Rob...

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Humming sound in cabin


It is very likely you hear the electric fuel pump in the fuel tank. If the noise is very low then don't concern yourself over it it is normal to some degree.. If it is really loud the pump bearing is failing.

Oct 10, 2012 | 2003 Ford Escape

2 Answers

I have a focus st3 2006 up to 30 mph i det a droning noise like a worn wheel bearing had the car checked out and wheel bearings seem ok could it be a dry bearing?


No, its your axle drive or cv booth are the problem. Check your cv rubber booth if rip, check both side wheel. Rubber booth is a sealed rubber covering the cv joint of your wheel. Sometimes you feel and you will hear that noise, only when you make a turn. Replace your both front wheel drive axle, ok

Mar 14, 2010 | 2006 Ford Focus

1 Answer

What is the dirrerence between the front wheel bearings and front ball joints?


The wheel bearings is what the wheel turns on,the ball joint is what the wheels turn the way you turn the vehicle.Wheel bearings let the wheel roll.

Oct 16, 2009 | 2003 Ford Focus

2 Answers

Fixing a 2003 ford focus front wheel bearings


remove the hub and spinle ,tie rod end ,axle nut.ball joint,and seperate from strut and then have new bearing pressed in...or rent a bearing press that works with an impact wrench,but they are a little hard to work with...good luck...lee

Sep 07, 2009 | 2003 Ford Focus

1 Answer

Loud droning noise when diving


low profile tires can cause this droneing noise , or if the wheels have to much air in them , id put 32 in the tyres and try it , if this doesnt work it could be a wheel bearing

Jul 19, 2009 | 2000 Chrysler Grand Voyager

1 Answer

Winding noise and vibration when driving on front right tire


you could have more than one problem the vibration accelrating maybe an inner cv joint ,if you just had the tires replace and an aligment done they should have checked the front end for worn out ball joint and tierods but the wheel bearing may not have any movment but can still make noise

Jul 13, 2009 | 2003 Kia Sedona

1 Answer

How to check front bearings on 2000 kia sportage


hi there, there are two ways to check your bearings, 1, is to jack up the vehicle so the wheel is free of the ground and to check for any play or roughness in the bearing by spinning the wheel, if the bearing is worn then you will hear a droning noise, 2 is to drive along a quiet road, at a speed where you can hear the noise, gently turn the steering from left to right so the vehile load is being shifted from one side to the other, if you have a wheel bearing fault the noise's pitch will alter,hope this helps

Oct 24, 2008 | 2000 Kia Sportage

2 Answers

HELP!


yes the bearings are pressed in. have to find a press

Jul 29, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2003 Ford Focus Logo

Related Topics:

929 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...