Question about 1996 Audi A4
The CD magazine was loaded with 6 CDs, some original recordings, some copies.
Pressing the mode switch on the radio shows CD00 ERR in the display. Pressing the eject button on the player flashes the button 3 times but nothing happens.
The 6 discs all appear on the same central axis but maybe one is stuck by a tiny amount that cannot be seen through the viewing window.
I have removed the unit from the car and turned it upside down to allow the magazine to fall out by gravity but that doesn't work.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: radio stuck in safe mode
Turn on radio - the word SAFE will appear in the display. Press th
P.SCAN and RBDS buttons simultaneously and hold them down until "1000"
lights up in the display.Release buttons.Do not, under no circumtances,
continue holding them down or press them once again. This will cause
the radio to consider the number 1000 to be the input code.Use station
buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use
the button 1 to enter the first number 2 for the second number 3 for
the third number and 4 for the last number.Once you have entered the
code and it shows on the display,press the P.SCAN and RBDS buttons down
again simultaneously and hold them down until the word SAFE appears in
the display.Release buttons. Soon afterwards a frequency will be
PLEASE RATE THIS !!!
Posted on Jun 11, 2008
sorry to say, you will need to take it in, it needs to be hooked up to their computer to reset and have it start up poperly. It just like a pc when it crash it will try to start in safe mode until you select "Normal" start up
Posted on Oct 13, 2009
Radio codes are only available from Audi dealers. You need to give them your vehicle chassis and engine No's as well as the radio serial no.
Posted on Jun 03, 2010
SOURCE: My Audi Q7 MMI display
Hi, the problem you are having and the warning you are getting with the lights is telling us its saying device error, now this is caused by one of several problems, now the first problem you can try and solve yourself and the second you wont be able to do but ill explain anyway.
the first thing you should do is go to a computer hardware store and purchase a laser cleaning cd, now these cd's have loads of little brushes and when you play this into your cd player it spins round and cleans all the dust and grime off the laser and doing this may get it working again.
now the problem you are having relates to either a dirty laser eye, or the laser has moved to far up the track it runs on to read the cd and it may have got stuck or the last problem you could have is that the laser has reached the end of its life and may need replacing or adjusting of it has pots that can be adjusted.
anyway try the cleaning first then try putting a cd in and see if it will read it and remove the warning. how ever as your getting this warning its usually telling us either their is a cd stuck in the drive or the laser has stopped working or has jammed, if it was just down to a dirty laser it usually gives you a different warning, how ever cleaning it can solve the problem so try that first as you can do that yourself.
if the cleaning dont work by a can of compressed air from the computer hardware store and give it a good spray inside the slot for the cd and then try it, if it still dont work then this tells us either the laser has moved to far up the track it runs on or the laser itself has reached the end of its life and either needs replacing or adjusting if it has these pots that can be adjusted, how ever here is the problem, you cant but the lasers for these devices when they made them they never made them to be repaired they where made as throw away devices after their life has run out, this is a stupid idea as most can be repaired by replacing the laser or the circuit board that controls the laser so it is a huge waste having to throw these out so the chance of getting the laser replaced is very slim if not impossible.
the only plus side you may have is that some lasers can be adjusted using a multimeter and a screw drive but the problem is to do this the unit needs taking out and stripping down to get to the laser and even then not all lasers have these pots that can be adjusted to read the cd again, what happens is over time the laser gets weaker and weaker so you can usually tweak these pots if you know what your doing and you can bring the power back up and this can give you another 12 to 18months of use but without taking it out the car and stripping it down their is no way of knowing if it is adjustable or not.
the only real option you have is if the cleaning dont work is to get the unit replaced and either sell yours for spares or just scrap it, i know its a huge waste and most can be repaired if only you could by the parts but they never made extra parts so the only way of getting it repaired is to match a laser up out of another player or even by a damaged one and swap the laser over, this to would cost money to do as the new laser will need adjusting to work with the control board in your car.
i hope i have given you some ideas to be getting on with and im ever so sorry their is no easy fix or button to press to get it working again but if the cleaning dont solve the problem then the chances are replacing the unit as a whole would be a lot cheaper than paying sum 1 to replace the laser or adjust it for you and thats even if it can be adjusted.
let me know how you get on or if you need further assistance ok
Posted on Feb 25, 2011
Tips for a great answer:
Oct 09, 2014 | Cars & Trucks
Mar 30, 2014 | Mazda RX-8 Cars & Trucks
Feb 20, 2014 | Mercedes-Benz Cars & Trucks
Aug 17, 2010 | 2007 Honda Accord Sedan
May 30, 2010 | 1998 Audi A4
Mar 26, 2010 | 1998 Audi A8
Jul 11, 2009 | 2004 Ford Expedition
435 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: