Question about 1999 Pontiac Grand Prix

1 Answer

1999 grand prix rar view mirror fell off

How to reattach???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

There is a special glue for attaching it. you can buy them at local auto store. it is used for windshield.

tnx 4 using fixya,

drcool

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reattach rearview mirror


Go to any auto parts store that carries Loctite brand mirror foot attachment glue kits, follow instructions to the letter, if not it will fall off right away.

Aug 31, 2014 | 2002 Pontiac Grand Prix

1 Answer

My rear view mirror fell off and the little metal piece is still in the mirror. How do I get the metal piece out of it?


there should be a set screw that comes loose with an allen wrench. Get a mirror kit from the parts store to glue it back on the windshield. After it dries, reattach the mirror.

Oct 20, 2010 | 1996 Ford Explorer

2 Answers

How to remove inside rear view mirror on 1999 pontiac grand prix


Most mirrors have a very small allen screw that you have to losen then the mirror will have to be slid up towards the roof of the car and it will slide off the metal piece that is glued to the windshield

Aug 27, 2010 | 1999 Pontiac Grand Prix

1 Answer

I too am having a problem removing the small metal piece from the back of my 2002 pontiac grand prix rear view mirror. It fell off the windshield due to the heat, I'm supposing. It has the Onstar...


It should be the same as the ones from the late 90's. You have 3 pieces there. The metal piece comes out the bottom of the mirror and should have a piece of plastic attached to it. It is a friction fit with the actual mirror so it shouldn't require a lot of hammering or even hard hammering.
Once the mirror is off there should be a small slot in the remaining plastic and metal. Use a small screwdriver or something similar to push in on a clip that is inside and the plastic and metal should separate. Hope this helps.

Aug 10, 2010 | 2002 Pontiac Grand Prix

1 Answer

How do I remove the button from my rear view mirror (which fell off) so I can reattach the button to the windshield?


should be a small allen screw that holds the "button" to the mirror. LOOSEN screw, glue onto window, wait to dry, and reattch mirror.

Jul 04, 2010 | 1999 GMC Sonoma

1 Answer

The rar view mirror fell off. How do i put it back on


There are a few products sold at Autoparts stores. If you can find 3M brand or a brand with an activator, they seem to work best.

You need to do several things to prepare for the job. First, get some tape and outline the old mounting position from the outside of the windshield. Then clean the inside surface of the glass.

You want to separate the mounting clip from the mirror stem. Usually there is an Allen screw in the clip. Sometimes the clips have a spring underneath that needs to be pushed down to allow the mirror stem to slide off. Note the position of the clip, if the narrow end is up or down and then glue the clip to the glass in the same direction.

After the clip has had time to adhere, slide the mirror stem into the clip, tighten the Allen screw and you are done. You will have to HOLD the clip against the glass for at least 2 minutes when you are glueing it.

Or you can go to a Glass Installer and they can do it.

May 16, 2010 | Cars & Trucks

1 Answer

Sideview mirror has broke from the base


Side view mirrors are relatively simple to replace. Sometimes it requires the removal of the complete door trim to gain access to the mounting nuts and any wiring it may have. Other times there is a triangle piece in the corner of the door window opening that can be removed by itself and allows access to the hardware and wiring connectors. Check local junkyards for a used mirror, you may even find one in the right color. Good luck.

Oct 25, 2009 | 1998 Pontiac Grand Prix

1 Answer

2000 Pontiac Grand Prix Passenger Side rear view mirror


As the owner of a 2001 Grand Prix GTP I can tell you that the mirror you speak of is not terribly difficult to replace, but you need the tools to remove the inside panels in the front corner of the window to get to it. Once you get that off there should be three bolts/nuts that hold the mirror on and if you have power mirrors then of course you'll have an electrical connector in there as well.

I dont have any instructions wrote up but there is a Grand Prix car club forum you can check that may have some information on how to replace it in more detail. You can go to grandprixforums.net, sign up and post up your problem and Im sure someone there will probably have specific instructions.

Dec 31, 2008 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
1999 Pontiac Grand Prix Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...