Question about Mitsubishi Montero Sport

1 Answer

Stereo is asking for a code - Montero Sport Mitsubishi Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 64,034 Answers

Here is the answer to the best of my knowledge. This applies to any body that has the need to get the code from the dealership and requires to pull out the radio and look up the serial number. The process is very simple, just follow these steps and you'll be on your way to listening to your radio again. First of all don't think you need to unscrew anything. The wood panel sorounding your stereo snaps out by pulling on it or using a flat screw driver at the corners. Once you have taken the panel out, you can see that the radio is held in by 2 hooks. Push up and pull forward slightly. You don't have to pull out the entire radio because you can see the serial number on the top surface very easyly. Write down the number next to where it reads s/n. Once you have the serial number, call the local dealership and give them your serial number. They will in turn give you a four digit code number that you will enter on your radio. One thing to note is that if you have entered the wrong code number 3 times, your radio would lock up and it would read "OFF". To unlock it, simply park your veichle in a safe place and leave the radio on for about 1 hour (no engine running just click the egnition switch to operate the radio). After one hour, the radio resetes and will aks you again to enter the code. start entering one number at a time using the first 4 buttons. Example, if your code is 4538, you would push button 1 four times to get to the number 4, you would push button 2 five times to get to the number five and so on.. After you have entered the correct code, push the cd button and there you have it. I hope this helps.

Posted on Sep 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

STEREO CODE IS NEEDED TO REBOOT THE STEREO SYSTEM


your best bet is that there maybe a 5 digit number in your glove compartment ..if there isn't there maybe a longer digit number in that case you need to call a dealership and ask them for a radio code and just follow what they tell you to do

Jul 25, 2012 | 2001 Volvo C70

1 Answer

Need Code for car stereo Model MOD4785E1


There should be a code on the side or top or bottom of the stereo if it don't have a code plz let me know

Mar 03, 2012 | 1992 Mitsubishi Galant

1 Answer

There is an error message on stereo


If it's asking for a code you can go to the dealer with your stereo serial number and they will give you a security code you can put in to unlock the stereo

Jun 18, 2010 | 2004 Honda Accord

1 Answer

Stereo code


Your stereo is on most likely on anti-theft, if its the stock stereo check the owners manual booklet, otherwise you'll have to ask the dealership

Jun 07, 2010 | 2000 Mitsubishi Eclipse

1 Answer

Hello, I have a recent Ford Focus with 6000CD RDS which frequently reports ''CD ERROR''. I've taken it in to the service center and they reset it and gave me a code as well as a tool to remove the unit to...


The 4 digit code is to unlock the stereo if the stereo is asking for the code.
If your stereo is working fine then just ignore it but keep the code safe, if your battery ever gets disconected or you remove stereo and put it back in then you will need the code to unlock it again.

Mar 21, 2010 | 2003 Ford Focus

1 Answer

Stereo code for a toyota corolla 1991?


Some of these older Toyota radios use hardwired codes so you will need specialist advice

Try asking here for free advice+code

www.ukbookshelf.co.uk

Mar 07, 2010 | 1991 Toyota Corolla

1 Answer

Stereo Code for 2005 Mitsi Lancer


I think you can ask the code from the mitsubishi motors where you bought your the car, they should have the code for that

Jan 21, 2009 | 2005 Mitsubishi Lancer

1 Answer

1995 Honda Accord CODE problem


Ask about, you can get radio's recoded at many places. Ask your local auto spares supplier, that would be my first port of call.

Nov 24, 2008 | 1986 Honda Accord

5 Answers

Stereo issues


Not unless it was written down in there by the oridginal purchaser so you will have to write VIN# down and phone the dealer and they will be able to give you the code along with how to do this also it must be a factory sterio hope this helps

May 27, 2008 | 2001 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...