- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1) open the hood. 2) Carefully remove the three screws holding the
headlight assembly in place. 3) Carefully slide the
headlight assembly out. At this point you can replace the headlight
bulb, turn signal bulb, or the entire headlight assembly. To replace
the headlight bulb turn the collar holding the bulb in counter
clockwise. Pull the bulb out of the headlight assembly. Replace the
bulb. Insert the bulb into the headlight assembly insert the collar and
turn clockwise until it locks. (Do not touchglass with your fingers or it will cause the bulbs to catastrophically fail - clean with alcohol pad if you touch the glass) 4) Carefully insert the headlight
assembly back into place. 5) Replace the three screws removed in step 2
being careful not to over tighten.
Unscrew the three screws that secure the headlight assembly to
your Dodge Caravan. Put the screws in your pocket or another safe
place, so you won't lose them before reinstalling the headlight
the headlight assembly away from the front of the vehicle. Turn the
bulb retaining ring counterclockwise to unlock the electrical
connector. Remove the electrical connector from the bulb assembly by
pulling it straight out.
the old bulb with a new halogen headlight bulb. Connect the
electrical connector and turn the bulb retaining ring clockwise to lock
the bulb into place.
the headlight assembly and secure the screws tightly before closing the
hood. Turn on your Dodge Caravan, flip on the headlights and verify
they're working properly.
There are three or four 10mm nuts that hold the headlight assembly to the radiator support. Access these by opening the hood, then you will see them. You may have to remove the battery or airbox to get to the ones on the drivers side.
josh the only way to replace the headlight is to take off bumper now look at top should be roughly 4 retainers pull the top middle out and pull out do the bottom of bumper and the at fenders these are usually 10mm orscrew 10mm take them out and slide the bumper off buddy and then go backwards. if you need anymore info go to collisionrepairadvice.com