Question about 1991 Mercury Tracer

1 Answer

1991 Mercury Tracer Fan Problem

The previuos owner said the car kept burning up the radiator fan motor. I replaced it and it rund all the time. The car runs fine without the fan plugged in but when you plig the fan in it dies like it's out of fuel or getting too much air. Even if I unplug the two (two wire) sensors on the water manifold by the Thermostat the fan continues to run.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

IWANNA FIX A TIMING BELT

Posted on Apr 13, 2009

  • gmpneol1982 Apr 13, 2009

    i put a new water pump now i lost the point i don,t know how to fix the timing belt

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fan located in a 97 Mercury Tracer?


You're looking for something like this:

Allstar Performance 6 Blade Fans ALL30102

It's usually located at the very front of the engine in front of the radiator. It is located inside a fan shroud.
Allstar Performance Fan Shrouds ALL30114

The fan circulates fresh air into the radiator and engine to help keep it cool.

WARNING: when the engine is running, the fan is rotating (very quickly!), so you most likely will not be able to see it. It is dangerous, so do not stick your hand or anything else into the area when the engine is running.

... How Does Radiator Fan Work DoItYourself com

..

May 12, 2016 | Mercury Cars & Trucks

1 Answer

My radiator fan stays on when the car is off


Replace radiator fan relay and retry.

Nov 09, 2012 | 1999 Mercury Tracer

1 Answer

1998 mercury tracer. overheated while waiting in


It might be a bad relay or a bad engine coolant temp sensor. Fan is likely good. Might have 2 relays. See owner manual.

Dec 14, 2009 | 1998 Mercury Tracer

1 Answer

My radiator fan won't turn off on a 97 mercury Tracer.


its probably a stuck relay locate it and replace it with another most likely that will cure it. check under the hood for a relay center.it should be diagrammed on the lid and use 1 from a different position first pull the one for the cooling fan if it stops that should cure it

Jul 18, 2009 | 1997 Mercury Tracer

1 Answer

Need to know where the blower motor is located


It is behind (and underneath) the front passenger side glove box compartment. If you lay on the floor you will see a circular shaped black plastic compartment, This is the blower fan and motor.

Please rate this info, thanks

Dec 09, 2008 | 1997 Mercury Tracer

2 Answers

Heater/AC won't blow out air


blower motor is behind the glove box. also check the blower resistor it should be nex to the blower motor

Oct 02, 2008 | 1995 Mercury Tracer

1 Answer

Overheating 1989 nissan maxima also radator fan won't come on


Hi,must of the time when fans stop working is because a fuse or a fan relay is burned ,it is also posible that the fan motor also burn out,there is a temperature switch at the cilinder head that can go bad and the fan will not go on. this should do it .....

Aug 31, 2008 | 1991 Nissan Maxima

1 Answer

95 mercury tracer trio/ ford escort wagon


engine coolant temperature sensor unit!? you say you had a thermostat issue some times if you over heat these the switch above might cause malfunction! I just spent 7 hours on relays!! with engine running un plug coolant sensor temp switch if your fan comes on you have no relay issues!! or ground problem keep in mind this switch tells the system the temperature then when reached sends signals to relay the fan to come on! when I unplugged mine fan ran plugged it back in off!!! replaced switch works great this is the true way to test don't get$$ it out hope this helps you out also be sure you have no air locks in your cooling system and you properly bleeded out all air sense you changed thermostat.John

Aug 18, 2008 | 1994 Mercury Tracer

1 Answer

94 tracer problem


not sure about the popping thing, but about the fan, try hot wiring the fan motor to the battery to make sure the motor is not burnt out. could also be a relay or a fuse link. I'm working on a 95 and having trouble locating the fuse links. I replaced my radiator fan motor, thermostat was busted, dropped new fuses in and a relay. Still no fan action. Mine must be a fuse link. If you are lucky it will be something quick to diagnos. Good luck.

Jun 27, 2008 | 1994 Mercury Tracer

Not finding what you are looking for?
1991 Mercury Tracer Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...