Question about 1999 Daewoo Nubira

1 Answer

Power steering Hi guy's I have been have trouble finding out what type of oil to use in the power steering pump of my Daewoo nubira x 1999 model. I have had the vehicle for just on 2yrs it didn't come with any manuals not even handbook so have been trying to find information with no luck...I have been told to use break fluid which didn'tseem right to me but one bottle of break fluid I have says it can be used but also says not to mix different fluids so leaves me rather confused....I so hope someone has an answer for me as the fluid is getting low... Thanks heaps....Jean...

Posted by on

  • Nette Sep 20, 2008

    Thankyou keemo68 I will check the colour of fluid I have...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Power steering fluid is sometimes the same as break fluid however i'm sure your vehicle uses regular atf which is red in color.

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Daewoo Nubira,Oil in spark plugs ports 1-4 What does that mean


You need to replace cover gasket,should be not too hard.

Apr 09, 2013 | 1999 Daewoo Nubira

1 Answer

ON MY 1999 DAEWOO NUBIRA I HAVE AN OIL LEAK DOWN BY THE OIL FILTER BEHIND THE LOWER REAR TIMING BELT COVER.IT SPRAY OUT IN A SMALL STREAM WHEN EVER I CRANK THE CAR.


possibly oil pressure switch which has one wire going to it near oil filter or split oil pump gasket or crank seal, might have to remove timming belt cover and crank while cover is off to locate leak

Jan 24, 2011 | 1999 Daewoo Nubira

1 Answer

I need a 1999 Daewoo Nubira Repair Manual. Is there one online that I could get for free or low cost? Thanks for your help, Chris


yes there is some just go on google and type the model and the year of your vehicule then owner manuel then you should be able to find some good luck

Jan 05, 2011 | 1999 Daewoo Nubira

1 Answer

Is my 2000 Daewoo Nubira oil pump going out?


That would be my first stop in this situation assuming you also changed the oil filter when you changed the oil.

Jul 26, 2010 | 2000 Daewoo Nubira

1 Answer

The lamp of engin oil is light when i stopped the car


Hi there ,
Generally if the engine oil lamp light is illuminating it is indicating that there is a problem in the oil system,
That could mean that its just overdue for a service,
Incorrect oil grade/type
Overfull or underfull oil level
Oil pressure switch faulty
Oil pump failing or an oil leak in the system.
I would highly recomend that you check it out before taking it too many places as oil is the only thing between your current engine and buying another new engine/car
Make sure you check the oil and water regulary its far easier then the other more expensive and painful options of replacing worn components.
Hope this helps you out in some way, If you need moer help just post back again and ill get to you asap
Cheers

Apr 01, 2009 | 1999 Daewoo Nubira

1 Answer

Daewoo nubira transmission control module


Hi, the TCM is located at the passenger side kick panel (LHD), when you remove the kick panel you will see the ECU (engine control module) directly above it is the TCM. I hope this can help.

amf07ph..

Oct 07, 2008 | 1999 Daewoo Nubira

1 Answer

Removal of window winder assembly for 1500 Daewoo


If your in adelaide call a place called new model wreckers in sydney. There service is realy good. i speak to a guy called dave there

Aug 30, 2008 | 1999 Daewoo Nubira

1 Answer

Oil leakage


The oil pressure release valve is located behind a large 3/4 lug on the oil pump, if you raise your vehicle and locate the oil filter, look up and to the right of the pressure sender switch, this nut should face to the rear of the of the car, undo it but have a cloth handy as oil will spill quite heavy from this once removed. Inside there will be a spring, remove the spring and to follow will be the valve, if the valve has a problem feed then you will have some trouble removing. Use a scribe to remove along with some (INOX) spray, spray it into the location and leave it for about 20 mins.

Jul 09, 2008 | 1999 Daewoo Nubira

2 Answers

CrankShaft Sensor


tha crankshaft sensor is behind the powersterring pump behind the aluminum base

Jul 08, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
1999 Daewoo Nubira Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...