Question about 1995 Chevrolet S-10 CA Edition
Remove the heater hose clamps and the hoses from the engine side of the firewall. From the inside under the dash on the pass. side, remove the lower panel screws and slowly pry the lower cover down and the heater core will slide out of the heater box. Installation is reverse of removal.
Posted on Sep 20, 2008
How do I remove a heater core out of a 95 chevy s10 pickup?
Posted on Sep 26, 2008
SOURCE: bad heater core
look undre the passenger side dash and you will see a black box. Look closely and you will see screws in it around the edges. remove all the screws then remove the cover,there is the heater core, held in by 1 screw that is kinda hard to see. next look under the hood on the passenger side firewall right in front of the dash, you will see 2 hoses with clamps on them. loosen the clamps and remove the hoses. you may want to drain the radiator first but I never do
Posted on May 05, 2009
you gotta remove the dash and the heater core box is on the passenger side behind wear a usual glovebox would be at . you will find it in a black sealed box with your wrapped heated hoses (In&out) easy fix
Posted on May 17, 2009
here is a link for step by step how to remove you heater core
Posted on Nov 18, 2009
As with all vehicles it seems the first part that they build around is the heater core. It is under the dash above the floor housed in a black plastic sealed box. Sealed with goop. Locate that box and start removing everything around it that is peventing taking the cover off. Of course disconnect the heater hoses under the hood a thefirewall.
Warning it is never as easy as it sounds.
Posted on Nov 29, 2009
SOURCE: I notice that there is
it means there is an air pocket trapped in the heatercore, what you do first is start the truck and let it get up to normal running temp. , be sure to be very careful as the coolant is very hot, now you take the heater hose loose and just barely crack the hose so that just a little bit of coolant starts to drip out (as you are doing this turn the heat up as hot as it will go and wear protective gloves ) do this till the hoses get hot. and if you want before you do all this ,with engine cold and off, backflush the heatercore , to do this, disconnect both heater hoses from heatercore, and take fosit hose to heatercore and flushit out. be sure to keep coolant full after bleeding air out, can be a long prosses. so if your not sure about doing this take to a shop.
Posted on Feb 12, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2016 | 2005 Chevrolet Chevrolet Impala LS
Oct 23, 2012 | 1998 Chevrolet Blazer
For heater core replacing procedure. I suggest you to go through
this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?
Click the link below: ---
How to Flush Heater Core?
How to Remove Heater Core ?
Heater Core Replacement?
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------
How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?
----------This will help.Thanks.
Feb 04, 2012 | 1998 Dodge Ram 1500 4WD
Feb 12, 2011 | Chevrolet Silverado 1500 Cars & Trucks
Jan 20, 2011 | 1999 Chevrolet Silverado 1500
Dec 11, 2010 | 1999 Chevrolet Silverado 1500
Jan 31, 2010 | 1998 Dodge Ram 1500 4WD
Nov 29, 2009 | 1999 Chevrolet Silverado 1500
Aug 28, 2009 | 1999 Chevrolet Silverado 1500
Jul 10, 2014 | 1995 Chevrolet S-10 CA Edition
2,013 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: