Question about 2003 Toyota 4Runner

1 Answer

Single power door lock does not work

My passenger side rear power door lock does not function. All other power door locks latch and unlatch when commanded. The passenger side rear power door lock requires manual switching.

Posted by on

  • 6 more comments 
  • Anonymous Nov 13, 2008

    This happened to my 2003 4Runner as well. First the front pasenger door power lock stopped functioning. Then, a month or so later, the front driver's door started having the same problem.

  • flamingo33 Jan 31, 2009

    I had the same problem with my 2003 4 Runner.  Get it fixed.  I got locked in my vehicle and Toyota told me to climb in and out the window till they could fix it.  It turns out that I had a defective door lock motor actuator. It was actually burned out by a car alarm that had been removed before I purchased the vehicle, new.  There were live wires in the door units. 

  • Anonymous Mar 13, 2014

    Can't open rear door because something is stuck in/under lock from the interior

  • Anonymous Mar 14, 2014

    rear passenger door lock won't work

  • Anonymous Mar 15, 2014

    2006 altima, passenger side ear seat latch will not unlock. How can I get it to open?

  • Anonymous Mar 15, 2014

    rear passenger door lock does work

  • Anonymous Mar 15, 2014

    rear passenger door lock does work on a 95 isuzu trooper

  • Anonymous Mar 16, 2014

    cannot get rear passenger side door to open

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 60,867 Answers

If it doesn't work from master switch then the door lock motor actuator will need to be replaced, this requires pulling the door panel.

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Cadi Deville, can't get any locks to operate with remote or dash push buttons, the remote operates everthing but the locks! When the remote door lock is pressed, lites flash,horn blows locks not.


Power Door Lock Operation
The vehicle is equipped with power door locks. Each lock actuator is powered and controlled by the door module mounted in the individual door, but the rear integration module (RIM), which is the master control for the door lock system, determines when the lock functions are permitted. The RIM receives and examines the requested lock function from the individual door modules, or from the remote function actuator (RFA) via the class 2 serial data circuit. The RIM also examines the transmission shift selector position and the ignition switch position information available over the Class 2 serial data circuits. If the RIM determines that a lock or unlock function is permitted, it sends a class 2 message back to the individual door modules commanding them to perform that Lock or Unlock function.
Power Door Lock Components
The power door lock system consists of the following components:
?€¢
Driver door lock switch


?€¢
Passenger front door lock switch


?€¢
LH rear door lock switch


?€¢
RH rear door lock switch


?€¢
LH middle door lock switch (w/ V4U)


?€¢
RH middle door lock switch (w/ V4U)


?€¢
Driver door switch assembly (DDSA)


?€¢
Driver door module (DDM)


?€¢
Passenger front door module (PDM)


?€¢
LH rear door module (LRDM)


?€¢
RH rear door module (RRDM)


?€¢
Left middle door module (LMDM) (w/ V4U)


?€¢
Right middle door module (RMDM) (w/ V4U)


?€¢
Driver door lock actuator


?€¢
Passenger front door lock actuator


?€¢
LH rear door lock actuator


?€¢
RH rear door lock actuator


?€¢
LH middle door lock actuator (w/V4U)


?€¢
RH middle door lock actuator (w/ V4U)


?€¢
Driver door cylinder unlock switch


?€¢
Rear integration module (RIM)


?€¢
DRVMDL fuse (10-amp)


?€¢
PASS MDL fuse (10-amp)


?€¢
RRDR MDL fuse (10-amp)


?€¢
Class 2 serial data link

Sep 27, 2016 | 2002 Cadillac Deville

1 Answer

Passanger side doors wont lock


From where , any switch ? driver door switch or either passenger door switch . This is a very complex system controlled by modules (microprocessors)
?€¢
The driver door switch assembly (DDSA)


?€¢
The driver door module (DDM)


?€¢
The passenger door module (PDM)


?€¢
The rear door module (RDM)


?€¢
The LH front power door lock switch


?€¢
The RH front power door lock switch


?€¢
The LH front door lock actuator


?€¢
The RH front door lock actuator


?€¢
The LH rear door lock actuator


?€¢
The RH rear door lock actuator


?€¢
The remote control door lock receiver (RCDLR)


?€¢
The power door serial data circuit


?€¢
The class 2 serial data circuit


?€¢
The DRVMDL Fuse - 10 amp


?€¢
The PDM Fuse - 10 amp


?€¢
The RRINMDL Fuse - 10 a
Class 2 and Power Door Serial Data Links
The class 2 and power door data circuits are both serial data links. The serial data circuits replace cables in the vehicle by multiplexing (time-sharing) data to and from each device over a single wire referenced to ground. If the power door serial data is lost, both the rear door module (RDM) and the passenger door module (PDM) enters the sleep mode. With the RDM and the PDM in sleep mode, no power door operations are possible.
Your best bet is to take it to the dealer or an ASE certified repair shop .

Feb 20, 2016 | 2003 Buick Park Avenue

1 Answer

My side doors won't unlatch electrically


Auto Repair : Power Door Lock Troubleshooting - YouTube

? 1:52
https://www.youtube.com/watch?v=wsqbE_ztTYw
May 12, 2009 - Uploaded by ehowauto
Power door locks are prone to failures due to electricalinterruptions, ... well plus my ac won't turn on at all both happened the same day please help ... 2007 the loock door button on the driver and passenger side will unlock ...

Doors won't lock using clicker : Volkswagen Jetta TDI ...

repairpal.com > Problems > Volkswagen > Jetta TDI
Volkswagen Jetta TDI Doors won't lock using clicker. This is a verified ... Front doordrivers side does not open from inside the car. I have to push door ... Difficult to Diagnose Electrical Issues Are Typically Due to Ground Issues · Find a Shop.

Remote door lock/unlock failure. : Honda Accord Common



Jan 01, 2016 | Cars & Trucks

1 Answer

Why does my 2004 Chevy Silverado lock and unlock while in drive? When turned off and no keys in ignition the drivers door will unlock on its own a short time later.


Gremlins ! HA HA HA sorry ! First off a little bit on how they work an what all is involved in making them work ! There are a few control modules in the mix , switches ,relays etc...
Door Lock System Components
The power door lock system consists of the following components:
?€¢
The driver door module (DDM)

?€¢
The passenger door module (PDM)

?€¢
The body control module (BCM)

?€¢
The driver information center (DIC)

?€¢
The rear door lock switch

?€¢
The door lock relay

?€¢
The door unlock relay

?€¢
The liftgate lock relay--utility vehicles with liftgate only

?€¢
The reversible door lock actuators in each of the doors and liftgate

?€¢
LOCKS 20A fuse (rear lock/unlock relay supply voltage)

?€¢
ECC 10A fuse (liftgate lock relay supply voltage)

Door Lock System Controls
The power door lock system can be controlled by any of the following:
?€¢
A power door lock or unlock switch activation

?€¢
A keyless entry transmission

?€¢
An automatic door lock function

?€¢
A delay lock function

?€¢
Door lock cylinder switch activation

?€¢
Lockout Prevention

?€¢
An airbag deployment

The front power door lock switches are integral components of the driver door module (DDM) and passenger door module (PDM). The switches are two position normally open rocker switches. When placed in either the lock or unlock positions, the switches provide a direct input to the DDM or PDM. The DDM or PDM monitors these inputs and sends a Class 2 message indicating a change in the switch's respective position. Modules which activate the power door lock motors receive the Class 2 message and activate the motor in the appropriate direction to lock or unlock the vehicle's doors and liftgate. The rear door lock switch provides a lock and unlock signal to the body control module (BCM). The BCM upon receipt of a lock or unlock signal will control the rear door lock relays and also send a Class 2 message to the DDM and PDM to perform the appropriate function.
The modules which activate the power lock motors are:
?€¢
The DDM (driver door lock actuator).

?€¢
The PDM (passenger front door lock actuator).

?€¢
The BCM (both rear door lock actuators and cargo door/liftgate).
The DDM and PDM are directly connected to the respective door lock actuator through the door lock motor lock and unlock circuits. Once a door lock or unlock request has been received, the module will supply battery voltage to one side of the actuator and ground the other causing the doors to lock or unlock.
The rear passenger and cargo doors differ slightly in that they use lock and unlock relays. The relays supply and coil sides receive a constant voltage through the battery voltage supply circuit. The normally closed contacts are connected to ground and the control side is connected to the BCM. Once a door lock or unlock request has been received by the BCM, the BCM will ground the control side of the appropriate relay. This energizes the relay and allows voltage to be applied to either the door lock motor lock or unlock circuits. since the other side of the door lock actuator is connected to the normally closed contacts of the opposing relay to ground, the doors lock or unlock.
The first place to start is have a factory or equivalent scan tool hooked up , one that can read BCM DTC'S - diagnostic trouble codes ! This could lead to a fix faster ! Watch these three videos !
Door Locks Go Crazy 1

Sep 16, 2015 | Cars & Trucks

1 Answer

Replace passengers side rear electronic door lock


Instructions
    • Remove the two Phillips screws in the arm rest and the singular screw holding the cover in front of the door handle. Remove the outside mirror cover by prying it off with the common screwdriver.
    • 2Remove the door panel by inserting the common screwdriver in between the door panel and the door. Slide the screwdriver along the outside circumference of the door and pry the trim fasteners out of their recess.
    • 3
    • Remove the door panel and disconnect the electrical connectors to the switches.
      Remove the electrical connector from the power door lock through the access panel in the door.
    • 4Remove the power lock mechanism located below the door latch. The power lock mechanism is in a bracket attached to the back-side of the door below the door striker. The door lock is snapped into its bracket with the rubber bushings. It has a vertical rod running from the door lock to the door latch. Unsnap the door lock and then lift it up and turn it so the rod can be removed from the door latch.
    • 5Install the door lock and door panel in reverse order of removal

Sep 17, 2012 | 1999 Toyota Corolla

1 Answer

The doors lock automatically on my daughter's '99 Cougar. This has happened to me when I left the keys in the ignition and closed the driver's door. After AAA came and unlocked the doors, I removed the...


shorted wiring in doors or shorted door lock actuator in door. A grounding of a wire makes them lock normally. SO, any bare wire touching metal will ground it and lock the doors.

Principles of Operations
The Door Switch Lock Function When a door lock switch is moved into the lock position or a door lock cylinder is rotated to the lock position, the door lock switch grounds the lock circuit input to the central security module (CSM). The CSM then provides 12 volts to one side of the door lock actuators contained in the door latch unit and simultaneously grounds the other side of the door lock actuators. This completes the door lock actuator circuit, causing the door lock actuators to rotate a cam assembly, which then locks the doors. The 12 volts that the CSM provides to the door lock actuators are provided to both door lock actuators from a single pin on the CSM electrical connector.
The Door Switch Unlock Function When a door lock switch is moved into the unlock position, the door lock switch grounds the unlock circuit input to the CSM. The CSM then provides 12 volts to the opposite side (relative to locking the door) of the door lock actuator(s) contained in the door latch unit and simultaneously grounds the other side of the door lock actuator(s). This completes the door lock actuator circuit, causing the door lock actuator(s) to rotate a cam assembly in the opposite direction, which the unlocks the door(s). The 12 volts which the CSM provides to the door lock actuator(s) are provided to each door lock actuator from the individual pins on the CSM electrical connector.
--------------------------------------------------------
CSM Self-Test The CSM has a self-test which can be entered into by using a diagnostic tool. This self-test will monitor the following CSM door lock inputs:
  • Unlock switch (DTC B1311)
  • Lock switch (DTC B1300)
  • Exterior lock switch (DTC B1309)
  • Exterior unlock switch (DTC B1341)
Before running the self-test, the following conditions must be met:
  • The ignition switch must be in position II
  • The driver and passenger doors must be unlocked
  • The driver and passenger doors must be opened
  • The hood and liftgate must be closed
  • The set/reset switch, and liftgate release switch are not actuated
It is important to note that all of the diagnostic trouble codes (DTCs), with the exception of B1551 and B1553 can be retrieved with the self-test. DTCs B1551, and B1553 are continuous and will only be retrieved if the liftgate release is operated prior to retrieving the continuous DTCs.
Inspection and Verification
  1. NOTE: Make sure that the battery is fully charged before starting electrical diagnosis.
    NOTE: Prior to carrying out the CSM Self-Test, make sure that both the driver and passenger doors are open.
    Verify the customer concern.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Binding latch mechanisms
  • Binding linkage
  • Misaligned door
  • Central junction box (CJB) fuse(s)
  • Wiring harness
  • Electrical connector(s)
  • Door lock switch(es)
  • Door lock actuator(s)


Module Controlled Functions
The central security module (CSM) covers the following functions:
  • Central door locking
  • Double door locking
  • Anti - theft alarm incorporating
    • forced entry
    • radio theft
  • Radio frequency remote control of
    • central door locking
    • panic alarm
    • driver door unlock
    • liftgate unlock
For additional information, refer to Section 419-01A Anti - Theft - Active, Section 501-14A Handles, Locks, Latches and Mechanisms, and Section 501-14B Keyless Entry/Computer Operated Locks.

The CSM is in the passenger side kick panel I think.

Good luck

Jan 25, 2011 | 1999 Mercury Cougar

1 Answer

When the overhead open switch is pressed, the passenger side rear door opens about 2 inches and stops. After opening manually it will not close with switch. When manually closed, will draw in last inch and...


It sounds like there are 2 motors involved, one that latches and unlatches the door, and a second that moves it out of the way or brings it back.

The one is working, the other is not.

First, look for a blown fuse.

Disconnect that 2nd motor (if you can find the connector), and use a volt meter to see if power is getting to the motor and the motor does not work, or the power is not getting there.

Jun 21, 2010 | 2005 Chrysler Town & Country

1 Answer

1998 4x4 ford explore driver side door will not


There are long linkage rods from the inside handle to the latch assembly. There should be an adjustment on these links. Too tight keeps latch from locking, too loose it won't unlatch. Use a screw driver or rod to trip the latch asm so you don't have to keep opening and closing the door. Also if it sticks closed and won't unlatch, the door won't be locked closed on you.

Feb 05, 2010 | 1998 Ford Explorer

1 Answer

Rear side windows


This may be just a case of inadvertently hitting the window lock out n th driver door window switch by mistake. Check that first. Here's some background on window operation

Principles of Operation
The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
Symptom Chart Condition Possible Sources Action
  • All windows are inoperative
  • BJB Fuse:
    • F20.
  • Circuit.
  • Power window relay.
  • Front door power window switch.
  • GO to Pinpoint Test A .
  • Single power window is inoperative
  • Front door power window switch.
  • Front door power window regulator.
  • Circuit.
  • Driver door power window switch.
  • GO to Pinpoint Test B .
  • Vent power window is inoperative — quarter window glass power latch
  • Circuit.
  • Quarter window glass switch.
  • Quarter window glass power latch.
  • GO to Pinpoint Test C .
  • The one touch down feature is inoperative
  • Master window regulator and door lock switch.
  • INSTALL a new master window/door lock/unlock switch. REFER to Switch—Master Window Door Lock/Unlock .
  • The back window will not defrost
  • CJB Fuses:
    • F30 (10A).
    • F32 (20A).
    • F34 (20A).
  • BJB Fuse:
    • F27 (45A)
  • Circuit.
  • Heated back window switch.
  • SEC/timer module.
  • Rear window defrost relay.
  • GO to Pinpoint Test D .
  • The back window defrost will not shut off automatically
  • SEC/timer module.
  • Circuit.
  • Rear window defrost relay.
  • GO to Pinpoint Test E .

Jan 28, 2009 | 1999 Mercury Villager

2 Answers

1997 ford explorer rear driver side door won't open


Pull the panel off starting at the top, you can just pry the window control apart, you don't need to unscrew that part. I sprayed white grease (lubriplate) all around the door latch inside there, and it unlatched easy.
After I put it back together, the knob still doesn't rise as high as the other side. I think the linkage is binding, and the connecting rod is bent. At least if the door won't unlock with the button you can do it by hand.

Jul 30, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2003 Toyota 4Runner Logo

866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...