An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: toyota hilux 1984 timing
Looking at the gears the upper one is on the gear its a dot. it goes flush with the valve cover mating surface to the right. gear on the right lower has a line and it goes pointed up with a mark on the block. crank gear has a v grove and an arrow on the block just under idler adj good luck man mark as fixed thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
have injectors or glow plugs removed and crank engine if water cones out. your engine might have experienced overheating and you have a blown gasket or a cracked cylinder and allows water into one or more cylinders.
if you can remove the timing cover and try to bring the engine using your hand with a tool by turning the crank shaft with the engine off and battery terminal off,to the timing marks. surely the camshaft and crank shaft sensors do have some marks. if it is diesel engine also the fuel pump has mark too. If you aligned the marks and are in a correct place then you problem is something else,If the marks are not aligned then you timing is wrong and try once more to fit it whilst in a correct place.
Hey NewK, Try looking under the Cam Pully If ya got the radiator out Its at the lowest point Fuunyist thing I ever seen but thats where it is. Heres a tip if ya radiator is still in the vehical Use a small mirror to help you see the Underside of the pully......................Tight Nutz, Donkuz.