Question about 1997 Geo Prizm
The light for the gear selectors does not work. What and how do I have to remove to replace the bulb?
SOURCE: 1996 geo prizm
you'll have to pull off the interior panel. window in the up position. on the lock cylinder there is a clip that you have to pull off and an arm that actuates the lock. pop the lock out. reverse to install.
Posted on Sep 22, 2008
SOURCE: turn signal
Well you haven't responded to my clarification request so I will assume they do light but don't flash. If this is the case the flasher unit located usually under the drivers side dash is probably the issue.
Posted on Nov 19, 2008
It should be the same place as a 1991 Metro, on the back side of the transaxle there is a plug that takes a 15/16 wrench to remove. the plug faces the drivers side tire. If oil drips out when you remove the plug it is full. Otherwise use your finger to see if you can touch the oil. Fill with some type of syringe. jeb
Posted on Jan 23, 2009
Yes a harmanic balancer from tha corolla is the same thing. I had to do the same thing with my 95 geo. It works out to be a lot cheaper buying for a toyota than a geo.
Posted on Mar 23, 2009
SOURCE: sprinter gear selector
This is the gear linkages. It is a cable operated system to allow the gear lever to be dash mounted.
They are a common fault. The parts are about £65 from Mercedes (dealer only part) and unless you know what you are doing you can expect about 2 - 3 hours labour charge, though there are no special tools involved.
They average about 60,000 miles, though the replacements tend to be better.
Posted on Mar 28, 2009
Tips for a great answer:
Mar 28, 2015 | 2010 Hyundai Genesis
Jan 10, 2015 | Geo Cars & Trucks
May 30, 2014 | 1997 Geo Prizm
Sep 14, 2010 | 2003 GMC Sierra 2500HD
Dec 22, 2009 | 1994 Geo Prizm
May 06, 2009 | 1996 Geo Prizm
Mar 19, 2009 | 1997 Geo Prizm
131 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: