Question about 1994 Buick LeSabre

1 Answer

Rearview mirror how to get door panel off passenger door

Posted by on

  • 3 more comments 
  • jimbarj Sep 19, 2008

    Thanks Bryant.....mirror got knocked off, so have to get inside door to put screws back in and plug power cable back in. Will have to glue screw mounts back on mirror but I'll be using alittle adhesive to put mirror back on with anyway.

  • jimbarj Sep 19, 2008

    Thats what I was really thinking about. Know that would be the best way. One other thing...........can you tell me where the EGR valve is located. It was hesitating alot when leaving red lights. Mechanic plugged off or bypassed what he called EGR valve. Now it runs fine, I'm just curious as to where it is.

  • jimbarj Sep 19, 2008

    1994 buick lesabre 6cylinder

  • jimbarj Sep 19, 2008

    Hi Bryant,

    Don't know if you're still there, but when you see the post its again I just wanted to express much thanks for all of your help. This is a great site. This is as good as the old days when you pulled up in the station and gotcha gas pumped for ya. Thanks again, have a great day and God bless you.....Jimmy Johnson

  • Anonymous Feb 21, 2009

    I have a 1989 Buick Century that won't pass emissions tests. It reads high on the noss. I have replaced the oxigen sensor and it didn't help. Could this be fixed by replacing the E.G.R. valve?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 125 Answers

Use a putty knife if you're not worried about paint or buy a plasic mold removal kit from any parts store. remove any and all screws you may find and "pull" it off. if you know of a store called "harbor freight," it is a $5.00 kit. it comes with 4 or 5 instruments for the same purpose because they are various sizes.

Posted on Sep 19, 2008

  • 2 more comments 
  • bryant smith
    bryant smith Sep 19, 2008

    honestly you may want to go to the local salvage yard and spend the $20-$30 to get one used. the glue may not hold and you'll wind up at this point again. if you're gonna do it, you might as well do it right the first time.

  • bryant smith
    bryant smith Sep 19, 2008

    what year make and model is the car? the egr valve is usually on top towards the back of the motor. it has two bolts/studs and a hose coming out of the base of it. on top, it kind of looks like the stereotype space ship that you would see in a b rated movie.

  • bryant smith
    bryant smith Sep 19, 2008

    there are three different types offered and used for your car. and they also have four different locations. 1. behind the throttle body (top center rear). 2. next to the brake master cylinder (below and left). 3. passengers side directly under the valve cover in the head. And 4. in the intake manifold. there are 3 differnt stlyes and i really cannot describe them. the only one that i can descirbe is the one that looks like a flying saucer on top. that is the one that would be top center rear.

  • bryant smith
    bryant smith Sep 22, 2008

    you are welcome!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 chev Express box van and my tail lights wont work every blinker works just not the lights both sides replaced bulbs still nothing


Fuse Usage 1 Climate Control 2 (HVAC) 2 Compass 3 Ignition Switch, Theft Deterrent System Module (PK3) 4 Upfitter Courtesy Lamps 5 Climate Control 1 (HVAC) 6 Empty 7 Instrument Panel Cluster 8 Audio System, Chime 9 Auxiliary Park Lamp 10 Auxiliary Trailer Back-up Lamps 11 Remote Function Actuator, Tire Pressure Monitor (TPM) 12 Climate Control (HVAC) Controls 13 Trailer Park Lamps 14 Front Park Lamps 15 Taillamps, Back-up Lamps 16 Empty 17 Steering Wheel Sensor 18 Outside Rearview Mirror Switch 19 Empty 20 Empty 21 Rear Defogger 22 Outside Rearview Mirror Heater 23 Empty 24 Empty 25 Cargo Door Unlock 26 Rear Door Lock 27 Front Door Lock 28 Rear Passenger Door Unlock 29 Upfitter Park Lamps 30 Front Passenger Door Unlock 31 Driver Door Unlock 32 Airbag System, Automatic Occupant Sensing (AOS) System 33 Right Rear Park Lamp 34 Left Rear Park Lamp 35 Upfitter Auxiliary 2 (J-Case) 36 Upfitter Auxiliary 1 (J-Case) 37 Rear Blower (J-Case) 38 Empty (J-Case) 39 Run (High Current Micro) 40 Park Lamps (High Current Micro) 41 Empty (Mini Micro) 42 Upfitter Auxiliary 2 (High Current ISO Relay) 43 Retained Accessory Power (RAP) (High Current Micro) 44 Rear Defogger (High Current Micro) chevrolet-express-fuse-box-floor-console-fuse-block-247x300-3m55w415sdhfmumhyuzqkab2-3-0.jpg

Jul 27, 2017 | Cars & Trucks

1 Answer

2007 gmc heated mirror module


Could have a DDS an PDS .depends on what RPO code yours has >
Outside Mirror Description and Operation (with RPO DL3)
Or
Outside Mirror Description and Operation (without RPO DL3)
Without
Heated Outside Rearview Mirror Operation
The REAR DEFOG relay controls the operation of the heated outside rearview mirrors. When rear window defogging is requested, the REAR DEFOG relay is energized and B+ is applied to the supply voltage circuit of the mirror heater element, located in the mirror face. A constant ground is also applied to the mirror face. Current will pass through the mirror heater element, warming the mirror, so long as the rear window defogger is commanded ON.

With
Heated Outside Rearview Mirror
The DDS and PDS control the activation of the mirror heaters. Upon receiving a serial data message indicating a request for heated mirrors, the DDS and PDS, will apply voltage to the mirror heater element supply voltage circuit. The mirror heaters will remain active until a new message is received indicating rear defogger is to be deactivated.
The power mirror system consists of the following components:
• Driver Door Switch (DDS)--An electronic control module with integrated switches and requires programming when replaced
• Passenger Door Switch (PDS)--An electronic control module with integrated switches, requires programming when replaced
• Power Mirror Direction Switch--Integrated into DDS and is a four position momentary switch that provides a signal input to the DDS for up, down, left/extend and right/retract with a mirror switch activation
• Mirror Select Switch--Integrated into DDS and is a three position switch that allows the operator to select the left or right mirror and also a neutral/fold position
• Mirror Extend/Retract Switch--Integrated into DDS and is a two position switch that allows the operator to select the mirror extend or mirror retract position
• Left Outside Power Mirror--Contains both the vertical and horizontal mirror motors
• Right Outside Power Mirror--Contains both the vertical and horizontal mirror motors
• Body Control Module--An electronic control module that requires programming when replaced, serves as the power mode master and is the main message handler
• Horizontal and Vertical Position Sensors, if equipped with memory mirrors--Supplied a 5-volt and low reference by the DDS/PDS and provide a variable voltage signal to the DDS/PDS that is proportional to mirror position
• Folding Mirror Motor, in each of the outside mirrors, if equipped with power fold mirrors--Provides extend and retract movements of the mirror and is serviced as a complete mirror assembly
Your best bet mite be to take to a qualified repair shop , i really don't think you'll be able to do anything with it.
Do you have wiring diagrams so you know which wires to test ,do you know how to do electrical testing ?
The Driver Door Switch (DDS) and Passenger Door Switch (PDS) supply voltage to the outside rearview mirror heater elements upon receipt of a serial data message from the HVAC module indicating that the rear defrost system is active. The door switch supplies B+ through the driver/passenger mirror heating element supply voltage circuit when a request is seen. Ground is applied through the driver/passenger mirror heating low reference circuit.

Sep 15, 2017 | 2007 GMC Sierra 2500HD

1 Answer

2012 hyundai tucson setting the garage door opener that is located in rear view mirror


Thanks filter4991;
1. Press and hold button on car's rearview mirror
2. Press and hold button on garage door opener's remote control.
3. Light on Rearview mirror will flash rapidly.
4. Release both buttons.
5. Locate learning button on garage door opener (generally this can be found by tracing the antennae to where it is attached to the unit.)
6. Press and release "Learning button"
7. Press and release rearview mirror button repeatedly until garage door opens/closes but it should work the first or second time.

Worked on Genie Intellicode and Hyundai Tuscon

Sep 20, 2012 | Hyundai Tucson Cars & Trucks

1 Answer

When replacing passenger side rearview mirror. how do you remove inside molding to access screws? 2000 SL model


Remove door rubber surrounding door at the mirror and if there are no screws behind the rubber, it is removed by pulling it off with force because it is held on with plastic tabs on the back

Jan 18, 2011 | 2000 Saturn SL

1 Answer

Cracked mirror only, mounting and other parts are functioning well. Can I purchase a mirror only and if so, where?? This is for 2006 Pontiac Grand Prix and the passenger side mirror is cracked but works...


Hello, yes the glass can be replaced. you will need to see your local GM dealer for the glass. real simple to replace.





  • Carefully push the outside rearview mirror face on the inner edge, near the front door window glass, to allow access.
  • Insert a large flat-bladed screwdriver in the slot between mirror lens and the mounting base.
  • Grasp the mirror face firmly and pull it from the mirror body.
  • Remove the outside rearview mirror case from the outside rearview mirror housing and disconnect the heater wire, if equipped.






  • Using the palm of your gloved hand, press firmly on the center of the glass until the case seats onto the motor.
  • The mirror will make a snapping noise when properly seated.
  • Inspect the mirror for proper operation.


  • cf49034.gif

    f845709.gif

    Jul 03, 2010 | 2006 Pontiac Grand Prix

    1 Answer

    I need to replace my exterior passenger side rearview mirror(electric) on my 1992 Ford Taurus. I have ordered the part but am not exactly sure how to proceed. Do I need to remove the interior door panel? ...


    Should be no need to pull door pannel, once you have the new part in hand it will be very clear as to were the srews are that hold it on and how the wires hook up. very easy job.

    Oct 26, 2009 | 1992 Ford Taurus

    1 Answer

    Hot to install driver's side rearview mirror '98 Expedition


    3 10mm nuts located behind the interior door panel (directly behind the mirror assembly) attach the mirror to the door. Also there you will find the point of attachment for the power as well.

    Oct 01, 2009 | 1998 Ford Expedition

    1 Answer

    How to replace outside rearview mirror on 2002 toyota camry


    on the door there should be a plastic panel in the area of the mirror if not take the door panel off then you should see the bolts holding the mirror in place may be 2 or 3 .reverse the process and youre good to go.

    Jul 06, 2009 | 2002 Toyota Camry

    1 Answer

    1999 Econoline E150 Van mirror replacement


    Remove the door handle bezel.Remove the power window/door lock switch bezel.Remove the rearview mirror fastener trim cover.Remove the 4 door trim panel retaining screws.One that was behind the mirror trim cover,behind the switch panel,behind the door handle bezel,and one at the bottom corner.Lift the door trim panel up from the door to disengage the trim panel clips.Remove the front radio speaker. Disconnect the power mirror wiring connector.Remove the 3 bolts to the mirror.

    Feb 08, 2009 | Ford E-150 Cars & Trucks

    1 Answer

    Passenger side rearview mirror replacement instructions


    real easy take off inside mirror cover then look hwere the 3 bolts are if you cannot get to all 3 then you must tkae door panel off First thing to look for are popouts there are screws underneath them take them out then check under armrest and around door trim edge they may have retainer small ones just push the midle in then pull bottom out then pull sides out and then pull out from bottomupward motion should be loose then get the 3 bolts and replace the mirror/ Thanks for using fix ya please rate my response thank you very much

    Jan 31, 2009 | 2007 Pontiac G6 GT Convertible

    Not finding what you are looking for?
    1994 Buick LeSabre Logo

    Related Topics:

    215 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    77499 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...