Question about 2006 Mazda CX-7

Open Question

Autolock Function How do i activate the autolock function of mazda cx-7

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 ford focus keeps locking. The power locks automatically lock as soon as I unlock them, barely enough time to open door.


Your Focus may be equipped with the autolock feature. Try this:

To deactivate/reactivate the autolock feature using the power door unlock control

You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds.

1. Turn the ignition key to ON.
2. Press the power door unlock control three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON. The horn will chirp.
6. Press the unlock control, then press the lock control.
The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated.
7. Turn the ignition to OFF. The horn will chirp once to confirm the procedure is complete.

Feb 18, 2015 | 2001 Ford Focus

1 Answer

Navigation Problem


if its below 20 most electronics dont function well..

Jan 02, 2014 | 2009 Mazda CX-7

2 Answers

Need to find a way to disarm alarm for Ford Contour Sport, 1996. Also it will not start


Many Ford trucks, vans and suvs use PATs (passive anti-theft) keys. These keys prevent someone from copying your key to a blank and using the blank. There is a small chip in the key which the vehicle must recognize before it will start.
PATS is Ford Motor Company's passive anti theft system. In 1996 it started showing up on select models of Ford and Lincoln Mercury vehicles. The keys for these vehicles have a tiny radio frequency transponder imbedded in the plastic Head.
pats_key.gifWhen you attempt to start the vehicle, the onboard computer sends out a RF signal that is picked up by the transponder in the key. The transponder then returns a unique RF signal to the vehicle's computer, giving it the ok for the vehicle to start and continue to run. This all happens in less than a second, and is completely transparent to the vehicle operator. It is a very effective system that does its job without the vehicle owner having to think about it, or modify his / her usual routine.
The PATs key is used on the following Ford family trucks and SUVS:
1998-up F-150
1998-up Expedition
2000-up Excursion
1998-up Explorer
1998-up Ranger
1998-up Lincoln Navigator
1998-up Mercury Mountaineer


Additionally, PATs can be found on the follow Ford family cars and mini-vans:
1998-up Contour
1997-up Crown Victoria
1999-up Escort
2000-up Focus
1996-up Mustang and Taurus
1998-up Windstar
1998-up 2000-up Lincoln LS
1998-up Lincoln Mark VIII, Lincoln Continental and Lincoln Town Car
1997-up Mercury Grand Marquis
1998-up Mercury Mystique
1996-up Mercury Sable
Following are the instructions for programming a blank key (you must have at least one working key for this procedure).
The PAT
1. Make sure you have both keys.
2. Turn on car but don't start. Watch "theft" indicator untils it goes out.
3. Turn off and repeat procedure with second key.
4. After "theft light goes out, insert new key and turn on.
5. Wait until the theft indicator goes off and then turn off switch.
6. Wait thirty seconds. New key is now programmed into security module. Repeat for any other keys.


1. Erase any old codes by entering the factory code.(buttons will light up)
2. Press 1/2 button within 5 seconds.
3. Press 7/8 and 9/0 buttons at the same time within 5 seconds.

To set new code:

1. Enter factory code (numbers will light up)
2. Press 1/2 button within 5 seconds.
3. Enter personal 5 digit code(decide beforehand) within 5 seconds of each previous one.
To unlock all the doors,press the 3/4 button within 5 seconds of the driver door unlocking.
To lock all doors and set alarm system,press 7/8 and 9/0 at the same time.
To disarm or reset a triggered alarm,just enter personal or factory code.

Do not set a code with five of the same consecutive numbers. It's too easy for thieves to figure out.

Deactivating and Activating Autolock

To deactivate the "autolock":
With all doors and tailgate closed but NOT locked,and ignition OFF.
1. Enter 5 digit code
2. While holding 7/8 button in, press and release the 3/4 button.
3. Release 7/8 button
The horn will chirp once if the "autolock" was deactivated
or two times if "autolock" was activated.

To reactivate the system,repeat steps 1 thru 3

Alternate Method To Deactivate And Activate Autolock

Do steps [1] through [5] (below) within 30 seconds or you'll have to do it over. If you have to do it over, wait 30 seconds between attempts.
Close all doors securely.

1.Turn the ignition key to ON.

2.Press the power door UNLOCK control THREE times.

3.Turn the ignition key from ON to OFF.

4.Press the power door UNLOCK control THREE times.

5.Turn the ignition key back to ON .The doors should lock and unlock.

6.Press the power door UNLOCK control. The horn should chirp ONCE to confirm successful switching of the autolock system.


Hope this help you (remember comment and rates this).

Apr 04, 2010 | 1996 Ford Contour

1 Answer

How do I de-activate the automatic power door locks? 1998 Ford Expedition Eddie Bauer Edition. (also - same thing happens to the 1995 Lincoln Town Car). Any Suggestions?


here is the instructions,i had to type it out because the picture was too large.Its actually for my 2000 Ford,give it a try because it might work.

Deactivating/activating the autolock feature
Before following the procedure,make sure that the ignition is OFF and all vehicle doors are closed.You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated.If the procedure needs to be repeated,you must wait 30 seconds.
1.Turn the ignition key to ON.
2.Press the power door UNLOCK control three times.
3.Turn the ignition key form ON to OFF.
4.Press the power door UNLOCK control three times.
5.Turn the ignition back to ON,The horn will chirp.
6.Press the UNLOCK control,then press the lock control.The horn will chirp once if autolock was deactivated or twice(one short and one long chirp)if autolock was activated.
7.Turn the ignition to OFF.The horn will chirp once to confirm the procedure is complete...Page 89 of the owners manual
about the Town car,try it on there as well,it wouldnt hurt it,i just dont have the manual for it.

Feb 25, 2010 | 1998 Ford Expedition

1 Answer

Can the auto lock be disabled?


Yes it can. To deactivate the autolock make sure all vehicle doors and liftgate window are closed and the ignition is off.
1. Enter the 5 digit entry code
2. Press and release the 3/4 control while holding the 7/8 control.
3. Release the 7/8 control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated.
To reactivate autolock, repeat steps 1 through 3.

Feb 07, 2010 | 1999 Ford Explorer

2 Answers

Set the combination lock on the driver door of 1999 Ford Explorer


check your car manuel and it should tell you to solve both

Jun 09, 2009 | 1999 Ford Explorer

1 Answer

1999 Lincoln town car doors will no longer automatically lock when the gear shifter is engaged. What would cause this?


Autolock can also be activated or deactivated using the following
procedure:
You must complete steps 1 through 7 within 30 seconds or the procedure
will have to be repeated. If the procedure needs to be repeated, you
must wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the power door unlock control on the door panel three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition key back to ON. The doors will lock and unlock.
6. Press the power door unlock control. The horn will chirp once upon
successful toggling of the Autolock feature.
7. Turn ignition to OFF.

May 15, 2009 | 1988 Lincoln Town Car

1 Answer

1999 Lincoln Town Car Cartier door locks


U may need to program the auto lock feature again, the instructions are this
Autolock can also be activated or deactivated using the following
procedure:
You must complete steps 1 through 7 within 30 seconds or the procedure
will have to be repeated. If the procedure needs to be repeated, you
must wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the power door unlock control on the door panel three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition key back to ON. The doors will lock and unlock.
6. Press the power door unlock control. The horn will chirp once upon
successful toggling of the Autolock feature.
7. Turn ignition to OFF.

May 15, 2009 | 1988 Lincoln Town Car

2 Answers

Auto Lock Activation


Deactivating/activating autolock
There are 3 methods to enable/disable this feature. One through your
dealer, the second with a power door unlock/lock sequence and the third
with the keypad.
Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors, liftgate and liftgate window are closed.
Controls and features
Power door unlock/lock
procedure
You must complete steps 1-5 within
30 seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.
1. Turn the ignition key to ON.
2. Press the power door unlock control three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON. The horn will chirp.
6. Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.
7. Turn the ignition to OFF. The horn will chirp once to confirm the
procedure is complete.
Keyless entry key pad procedure
1. Enter 5 digit entry code
2. Press and hold 7/8 control
3. Press and release 3/4 control
4. Release 7/8 control.
The user should receive a horn
chirp
to indicate the system has
been disabled or a chirp followed by
a honk to indicate the system has
been enabled.
Smart unlock
This feature prevents the driver’s door from locking while the key is in
the ignition. This feature will unlock only the driver’s door if the key is in
the ignition cylinder, the driver’s door is ajar and all doors are locked
using the interior trim switch. If these conditions are met, the entire
vehicle will lock and the driver’s door will unlock within 1 second.
Controls and features
127

May 15, 2009 | 2002 Ford Explorer

1 Answer

Auto door locks


To activate the autolock feature, use the following steps:
  1. Enter the five-digit permanent entry code into keyless entry keypad (14A626) .
  1. Press and hold the 7/8 button on the keyless entry keypad within five seconds of entering the code.
  1. Press and then release the 3/4 button within five seconds of pressing and holding the 7/8 button.
  1. Release the 7/8 button on keyless entry keypad within five seconds of releasing the 3/4 button. To deactivate the autolock, repeat the above sequence.

Dec 17, 2008 | 1995 Mercury Cougar

Not finding what you are looking for?
2006 Mazda CX-7 Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...