Question about 1996 Lincoln Town Car

1 Answer

Brake line schematic for abs with tracion control

Have an 96 towncar that a friend brought to me to fix, and he tore out the abs pump and lines and know where everthing goes.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

Sorry, i dont have brake schematics but i could refer you to a friend of mine regarding brakes. his handle is benimur. look for him here at fixya,

tnx 4 asking me,

drcool

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is a abs modular on a Escalade Cadillac?


Jesse, The module will not stop fluid to rear brakes, a bad master cylinder will,leaking lines, air in brake system, faulty metering block if equipped, collapsed flex lines or pinched brake line faulty caliper or brake cylinders,etc. will cause the possible feeling of no rear brakes.
(ABS Module components) the ABS speed sensors and the ABS control module . When the brake is applied, the ABS control module reads the speed data from the speed sensor and sends the correct pressure to each wheel to prevent any wheel lock up, eg. sliding/skidding Links below have more info.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Service Stability System AND abs Pump issue

ABS Control Module Replacement Service Cost YourMechanic

https://www.rockauto.com/en/catalog/cadillac,2002,escalade,5.3l+v8,1431695,brake/wheel+hub,abs+control+module,1844

Feb 24, 2016 | Cars & Trucks

1 Answer

Brake fluid leaking somewhere after the master cylinder on a 1996 Geo Tracker


got rust bad ,huh>
got ABS option (first year of real ABS here)???
the drawings are unique by ABS or not. on all cars, 96 to now.
as are partnumbers
Suzuki still sells them.
why not use 2 persons to test this.
one at the brake,
one looking, and in 5min flat, the leaking part is seen.
the buy a new one.
hard, cant answer, ABS not stated. but in all cases
the system needs a full bleeding.. google that. learn'

do not drive it. FIX iT.

http://www.fixkick.com/brakes/brakes.html#DoNotDrive

see the 96-98 drawings at the end of this page.
its there.
and suzuki , sells the parts, see link at end of page for where.
online sales.


old post but is safety issues.

Apr 22, 2014 | 1996 Geo Tracker 2 Door

1 Answer

Buddy of my has a 1990-96 or so jeep cherokee that has a problem with the brakes ...something about electronic module controlling a hydralic module ...something like the dealership recalled them back in...


Part you're probably looking for is the ABS pump motor or pump motor relay.
Personally though you'd probably be better off checking the line routing for a non abs vehicle and copying it, eliminating the abs system. (scrapyard is a good place to look for "hard" parts and to actually see how lines run, but do use new lines).
The abs system functions just like "normal" brakes when the pump fails, so, it should be ok to drive it that way unless there is something else wrong (leaks etc)

Apr 07, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

The abs brakes are starting to stutter in my 96 lincoln towncar. i hope it doesn't cost too much to fix because it's my daily driver with only 90,000mi.


check fuses to make sure abs pump is working properly.but at 90,000 miles you probably need new brake pads
not expensive if you know a good mechanic

Dec 14, 2010 | 1996 Lincoln Town Car

1 Answer

Brake pedal goes too far to the floor on initial application, pumping brings the pedal up, bled several times


Sounds like an internal leak in the master cylinder, an external brake fluid leak (such as a leaking brake line), or extreme misadjustment or binding of the calipers or drums. Any could be the case, and you can eliminate the last 2 rather easily. Do you see any sign of fluid coming from any of the brake lines? If not, move to adjustments. Check the calipers for bound up caliper pins and if equiped with rear drum brakes, the adjustment and condition of the rear shoes. After that, go right for the throat and replace the master cylinder. Be sure to bench bleed it before you install it, and if you have ABS, make sure you also bleed the ABS system, OR if you can't bleed the ABS system have the new master cylinder ready to install, and remove the brake lines as quickly as possible from the old master and have a friend hold thier fingers over the ends of the lines. I do this quite a bit at my shop, and it's VERY rare that I actualy need to bleed the ABS after replacing a master cylinder if little to no air gets in the brake lines.

Dec 10, 2009 | 2000 Subaru Outback

1 Answer

Brake fluid leaking from ABS distribution block


You have to replace the master cylinder because the fluid that leaks from it is getting into the brake booster and compromising the seals. So you can probably get away with the booster and cylinder. Unless the ABS unit is a part of the either of the affected parts, or isn't working properly, you can leave it alone. ---------------------
A fluid-distribution system includes a plurality of fluid-distribution nodes with three-way ports attached to bleed/flush lines and alternate ports attached to vacuum lines. A first pump is used to draw new brake fluid from a new fluid container, push it through the manifold and ports, and through the bleed/flush lines. Fluid flow through the ports is selectively controlled by a computing device. In this manner, a vehicle's brake system including individual brake lines and ABS systems, may be flushed in a prescribed sequence. The vacuum lines are connected to a second pump via alternate ports of the sequential control valve manifold and may be used evacuated air and contaminated brake fluid from the vehicle's bleeder valves or master cylinder. Additionally, the bleed/flush lines may be connected to the alternate ports during priming or purging of the system. This also facilitates storage of the bleed lines as it prevents brake fluid from spilling and prevents air from entering the system. thanks.

Jul 11, 2009 | 2000 Mercury Cougar

1 Answer

1995 buick park ave , trying to locate abs relay under hood


IF YOUR ABS LIGHT IS ON YOU HAVE ABS PROBLEMS LET THE DEALERSHIP FIX IT.SOUND LIKE MASTER CYLINDER PROBLEMS.ITS CONNECT TO ABS MODULATOR.YOU NEED A TECH 2 SCANNER TO RELEASE THE TENSION MOTOR IN MODULATOR.YOU CANT FIX IT AT HOME.ITS A DEALERSHIP JOB..

Jun 10, 2009 | 1995 Buick Park Avenue

1 Answer

Abs light on dash is lit brakes are good


Did some research and found that the module that connects to the ABS pump (next to battery) to be the problem. ISUZU wanted $3,200.00 to fix it. Bought one off of a wreck for $146.99 (LOL, yep, $146.99). Removed battery, disconnected the large cable going to the ABS, unclipped the 3 brake line clips on the top of the fender so the ABS pump could be removed and swapped the electronic modules- did not have to penetrate the brake lines at all. Took me 20 minutes. Restarted Trooper and ABS light went out.

May 08, 2009 | 2001 Isuzu Trooper

1 Answer

Speedometer,mileage does'nt work,abs,traction,brake lights r on


no it does not; this is a massive short in the electrical system and, requires the services of an auto electrician like myself.
take the car in to an ASE certified auto electrical shop and, stop spending money on temporary fixes
the technicians can read the schematics and, fix your car right

Apr 29, 2009 | 2000 Lincoln LS

Not finding what you are looking for?
1996 Lincoln Town Car Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...