Question about 2000 Toyota Camry

1 Answer

2000 Camry Engine replace - continuing the questions

Hi - Thanks for responding to my question earlier. I'm just wondering if you have replaced with Jasper engines before and if you do that, how long the cars have been able to keep driving (just on avg.). Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi..
Yes I have replaced Engine and Transmission. for a few car ,, From JASPER.
But I never had a Problem. And I gave the warranty to my Customer.

How long the cars are able to keep driving?.
Is almost inpossible to know.
But Depend of Good Maintenance. And use conditions..
Important, When you do OIL CHANGE. Don't do on Quick lube or Fast SERVICE.
Because all of them use a BULK RECICLED OIL.
I noted this OIL has a hight level of Consuption.

OK.. I hope this help.

Thank you..

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove timing belt cover on 2000 toyota camry 4 cylinder 2.2 litre? i notice the securing bolts around the perimeter. do i access some of these from the wheel bay?


See here for info, p26 and 242.

http://www.turboninjas.com/camry/eg1.pdf

This is for an earlier year model, but is for the 2.2L engine.

You will have to remove the crank pulley, timing belt covers and timing belt, for best access. Unless it is fairly new, I would replace the belt wile you are at it.

Oct 13, 2014 | 2000 Toyota Camry

1 Answer

What is the cylinder order for a 4 cylinder toyota camry


It is 1-3-4-2 with No 1 being at the timing belt and crank pulley end.

Jun 09, 2014 | 2001 Toyota Camry

1 Answer

Does My 93 Camry have a timing chain or Belt ? when to change it?


its timing belt. This car requires the timing belt to be serviced at every 60k miles. This engine is a non-interference motor, so the engine will not get damaged internally if belt breaks. But other parts externally can become damaged. Also at the same time the timing belt is changed, replace the water pump, idler and tensioner pulleys.

May 13, 2010 | 1993 Toyota Camry V6

2 Answers

Started motor problems on Toyota Camry 2000


You need a new starter bendix, or a whole starter. Best do it soon before you tear the teeth of the flex plate. Once you do that you have to pull the transmission to change it.

Apr 02, 2010 | 2000 Toyota Camry

1 Answer

I have a 2000 Camry - 6 cylinder with about 180,000 miles on it. The Check engine light came on and it showed three codes - P0125, P1130 and P1135 - We put in a new thermostat - and still the check engine...


Was the computer reset after the thermostat was replaced?? If not, it must be reset to clear prior codes. as for the p1130/1135, they are related here is some info>>>>http://www.engine-light-help.com/toyota-engine-light.html

Mar 11, 2010 | 2000 Toyota Camry

1 Answer

Plugs for Camry 2000 4 cyl.


The plugs that are supposed to be in a 2000 4 cyl Camry are :
PK20TR11 Toyota P/N 90919-01194

The K16TR11 plugs fit a variety of models.
They are found in the following units:

98/99 Corolla
95/97 Paseo
95/98 T-100 V-6
95-04 Tacoma V-6
00/04 Tundra V-6

There is no question that your dealer installed the wrong plugs.

I would really appreciate a FixYa rating for the information that I have provided you. Thnaks in advance.

Jan 25, 2009 | 2000 Toyota Camry

1 Answer

1998 toyota camry V6


P0420 indicates you have a catalyst efficiency issue; replacement of the Air-Fuel Sensor should take care of that;
The P0441, P0446 and (I assume P0440); you said 446 twice, indicates a faulty or loose fuel cap; it is not sealing properly.
Please feel free to respond to me if you have any further questions.
A FixYa rating from you regarding my assistance would be greatly appreciated.

Dec 27, 2008 | 1998 Toyota Camry

1 Answer

Ford expedition


that could be the problem check for voltage and a good ground at the sending unit

Sep 23, 2008 | 2000 Ford Expedition

1 Answer

Crank won't turn 360 degrees into TDC position.


It is very possiable he make a mistake installing the belt and is trying to get you to pay him to repair his fuc.. up, don't fall for it, ask him why there wasn't an issue before he worked on it?? I am not sure about weahter that engine is free wheeling, I know earlier models were not, my own personnel expeariance on friends 4 cyl Camry

Jul 28, 2008 | 2000 Toyota Camry

Not finding what you are looking for?
2000 Toyota Camry Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...