Question about 2007 Mazda MPV

Open Question

MAZDA 5 2005 MPV SPEEDO PULSE WIRE LOCATION

CAN ANYONE HELP IM TRYING TO FIT A TAXI METER IN A MAZDA 5 2005 CAN ANYONE TELL ME WHERE THE SPEEDO PULSE WIRE IS OR WILL IT NEED A CAMBUS FITTING?

TIM IN YORK UK

Posted by on

6 Suggested Answers

Technopro
  • 243 Answers

SOURCE: i have just fitted a tow bar to my mazda 323f

You'll find what you are looking for on : http://www.volvoclub.org.uk/towbar_electrics.shtml
Hope this helps you out. Cheers.

Posted on Mar 23, 2009

ghost4548
  • 776 Answers

SOURCE: 2006 Hyundai Sonata. pulse wire for the speedo.

Go to http://www.hmaservice.com/ and register the Sonata (VIN). Then you'll have access to all kinds of data, technical and otherwise, related to your vehicle... ,service manuals, service bulletins, wiring diagrams, etc.

Posted on May 28, 2009

  • 155 Answers

SOURCE: 2004 mazda MPv Where is the location of cyl. #6?

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

Posted on Jun 08, 2009

  • 101 Answers

SOURCE: I get code p0106 on my mazda mpv 2000 can anyone

p0106 means:
manifold absolute/barometric pressure out of range

which is something in the EGR circut. Could be as simple as a vacuum line or a clogged hose or valve.

Posted on Oct 18, 2009

  • 251 Answers

SOURCE: specifications for 92 mazda Mpv timming belt

line up the marks on the gears

Posted on Mar 04, 2010

bbbman78
  • 680 Answers

SOURCE: 96 mazda mpv minivan 165k mi. Ran fine until one

I was browsing unsolved problems. If you still have the problem, I'll try to help you. But it's going to be awhile trying to communicate back and forth. First...Check the engine for spark. Take off a plug wire and stick a screw driver in the wire end and place the metal part of the screw driver next to something on the van that's metal. Have someone crank it over for just a second or two and see if a small spark jumps from the screw driver to the metal part. I'll check back for your answer.

Posted on Mar 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the vss wire located on a 2006 prius


violet wire on 26 pin connector to the multi display

Oct 06, 2014 | 2006 Toyota Prius

1 Answer

Location of the speedo sensor


Try looking at the far end of the transmission just before the drive shaft (on the driver side). The sensor is a tiny piece of plastic screwed to the transmission by a (10 mm head) screw. It is a round cylinder inside the transmission. Also connected to the plastic piece is a wire that is about 1 foot long to its connection.

The speed sensor actually won't slide out since the floor board is in the way. It is necessary to remove both cross-members of the drive shaft and leverage the shaft down to slide the sensor out (3/4" wide by 1" long).

Thank You

Dec 28, 2012 | 2000 Mazda MPV

1 Answer

Fuel filter 1990 mazda mpv


it should be by the driver side firewall under hood

Jul 08, 2012 | 1990 Mazda MPV

1 Answer

I need to know exactly where the location of the thermostate is in my 1994 mazda MPV. Can anyone help me? I am trying to change it.


Follow the lower coolant line from the radiator to the engine and the thermostat will be under that housing. Hope that helps you.

Aug 05, 2011 | Mazda MPV Cars & Trucks

1 Answer

I need to install a centrodyne pulse divider in my 2007 dodge caravan to go with my centrodyne silent 610 taxi meter.


Call Lee at Centrodyne he will help you.
The pulse is most easily found on the transmission at the VSS output. It is a connector with two wires, you want the DG/V. Run that to the pulse divider green wire. From the meter, tie the white in the 2 stand cable to the pulse output. Hook up power and ground then calibrate the meter. You should end up in the 33,000 range for calibration.

Feb 05, 2011 | 2000 Dodge Caravan

1 Answer

Mazda MPV 2003, Engine light on, code P0421 - warm up catalyst efficiency below threshold bank 1


could anyone please help me with this problem that i have with my 2001 mazda protege es 2.0. i have a bad catalyst converter and im waiting for the converter to come in, but before the guys that are fixing on my car relize that i need a converter they put a egr valve and a o2 senor and when the car idle some time it will just die one me. could someone tell me what is going on.

Nov 30, 2010 | 2003 Mazda MPV

2 Answers

Where is the starter on a 2001 mazda mpv, and is there anything special you have to do to take it off


It's on the side near the bottom of the engine. Follow the positive wire (red) from the battery as it goes straight to the starter.

Aug 18, 2010 | 2001 Mazda MPV

1 Answer

2006 Hyundai Sonata. pulse wire for the speedo.


Go to http://www.hmaservice.com/ and register the Sonata (VIN). Then you'll have access to all kinds of data, technical and otherwise, related to your vehicle... ,service manuals, service bulletins, wiring diagrams, etc.

May 13, 2009 | 2006 Hyundai Sonata

1 Answer

Wiring colours for the sound system MAZDA PREMACY 200


well if you have not cut the wires you can go to wal-mart or autozone ask for a after market wire harnis just tell them the make and model . but if you have cut them then get a light tester

Apr 04, 2009 | 2000 Mazda MPV

1 Answer

Location!


on the throttle body man, if ya need pics, just ask me at cheezeedaddy@yahoo.com i work for mazda

Dec 22, 2008 | 2002 Mazda MPV

Not finding what you are looking for?
2007 Mazda MPV Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...