Question about Peugeot Liberte

1 Answer

Ive bought a peugeot306 recently and the person who had the car before has took there car stereo out and cut the wire, so now im having trouble putting my stereo in. thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 272 Answers

  • First thing to do is isolate all the cables from each other and put insulating tape over the bare cables.
  • Now using a multimeter set on 12 volts or above test each cable in turn with the ignition on.
  • You will find one live cable that is only live when you have your ignition in the number one position.
  • This is the live feed to your radio, fit a small amp-age fuse (5 or 7.5 amp) depending on the rating for your new radio.
  • You will have speaker wires, these you can identify by tracing them from each speaker.
  • By now you will have identified your live cable and your speaker cables.
  • You may have a secondary live for a electric aerial and an earth cable. You must earth your radio even if you have to make an earth on the inner bodywork.
  • If you do not need the secondary live then make if safe.
  • If you need the secondary live fit an appropriate fuse.
  • Earth the new radio.
I use this system on used cars before fitting radios/cd players. It works but be careful.

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i hardwire an aftermarket stereo in my 2001 vw passat without any issues and is there a diagram on how to do it? Ive installed many stereos but from what ive read it sounds a little tricky.


use an adapter,do not cut factory wiring harness!!!!!!!!!!!! plug right into the factory plug,get your adapter here or find one online,dont forget your antenna adapter too,walmart also carries the adapters, Car Stereo Installation Parts for2001 VOLKSWAGEN PASSAT4DR 5DR SDN WGN GLX

May 15, 2015 | Cars & Trucks

1 Answer

Stereo cuts out when i flash the headlights


Is it an aftermarket stereo? I know vw dont like these and give you lots of problems. Check the wiring at the back of the unit for chaffing too. :)

Jun 16, 2012 | 2001 Volkswagen Golf

1 Answer

Im in great need for the color coded wires for the factory stereo, I just bought the car and the person who had it before me, ripped out the stereo and cut off the wiring harness before the bank...


ok there should be 8 speaker wires, red wire +, a yellow wire acc(i think its called) and a black wire -, the after market stereo will come with a harness and it will be labled to make it easy, with car speakers it dosent watter what why you put the wires on the same speaker as they are both positives, if there are any left over on your stock loom I would not worry thats all you need. Just ask me if you need any more help

Aug 15, 2010 | 1998 Cadillac Catera

1 Answer

Im putting n a stereo but i dont no the color code


The stereo side of the wires should be labeled. Check out the12volt.com for a wiring schematic for the truck side. I advise against cutting and splicing wires for a stereo installation though. They make inexpensive harness adapters that will allow you to splice into the stereo harness without cutting into the factory wiring.

May 23, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Speakers have no sound coming from them.


There is not fuse for the speakers themselves. The speakers maybe blown out. I would take a speaker out and connect it to the home stereo and see if it works. I would check to see if the speakers are plugged in also.

May 01, 2010 | 2000 Volkswagen Jetta TDI

2 Answers

Need to know the wires to install a deck for 97


Red is power to from ignition to cd deck
Yellow is direct power from battery to cd deck to hold the memory.
Black is ground
Blue is only needed if you are hooking up an amplifier.
I always suggest buying a wire harness quick connect system for $5, then you won't have to cut origional car wiring. If by chance you are taking the original wire route, then go to installer.com to find which wires on the car are for what.

Sep 02, 2009 | 1995 Toyota Celica

1 Answer

Wiring cut when my stereo was stolen now nothing works.


Could have crossed wires and blown the fuses. try isolating and electrical taping the wires and then go through your fuses and replace the blown ones.

May 29, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Need a wiring diagram for a ford escort stereo


Email me and ill send u a pdf which contains the standard wiring for a factory ford vehicle. (wire colors) that is.

Dec 21, 2008 | 1997 Ford Escort

1 Answer

No power to radio


I just finished installing a new system in my 94 100s.To make it easy for me I bought a direct-fit connection kit from Crutchfield online. The connection fits into the one from your car and then you just wire it into your new stereo! I hope that helps.

Jun 23, 2008 | 1994 Audi 100

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...