Question about Chrysler New Yorker

1 Answer

Have a 1986 Chrysler New Yorker. The Transaxle dosen't want to upshift after it warms up. Is the trans shot, or is there an adjustment?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 421 Answers

You may try draining the fluid and replacing the filter check the pan for metal deposits and if none reinstall new fluid with Lucas transmission additive at a ratio of 50% it sounds like your valve body or internal pump is leaking pressure due to a worn seal and this lucas treatment should help for a while, if not you a least tried before sourcing a new or rebuilt trans axle good luck and please rate- Jeff

Posted on Sep 18, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the crank sensor located on a 93 chrysler new yorker?

Should be on the transaxle housing. It reads from the flywheel.

Aug 04, 2014 | 1993 Chrysler New Yorker

1 Answer

I have a chrysler new yorker 92 . i was driving and the gass petal wouldnt accelerate the trans. Then it will kick back in after pressing a couple times. Friend said to try trans. filter first.

Your transmission is slipping and most likely failing. You could try getting fluid and filter changed. But these cars are notorious for the trannys going out. Sorry. Im sure mine will bite the dust soon.

Apr 06, 2011 | 1992 Chrysler New Yorker

1 Answer

The dash vents in my Chrysler new yorker do not blow air - when i turn air or heat on lower and defrosters work fine but no air comes out of the vents on the dah boards

check the vacuum lines. plastic lines break. one line goes into the fire wall. then there are several lines coming from the control panel. sometimes the plug comes loose

Jun 14, 2010 | 1986 Chrysler New Yorker

1 Answer


you need to check the fuel pressure on the rail it seems too low

Jan 26, 2010 | 1986 Chrysler New Yorker

1 Answer

Where is the voltage regulator on a 1986 new yorker 2.2 turbo i,ve checked all over under the hood with no luck should,nt it be on the passengers side wall,thanks in advance,gary.

chrystler had a rash of vechiles that they used the ecm as the voltage regulator, if this is the case and your new altenator is not charging then you can install a diode pack obtainable at your local parts store. it could also have an internally regulated altenator.

Oct 09, 2009 | 1986 Chrysler New Yorker

1 Answer

Where is the crankcase ventilation module on a 1986 chrysler 2.5 located/

should be on one of the valve covers.take it out see if it rattles if not replace it

Jul 13, 2009 | 1986 Chrysler New Yorker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides