Question about 1994 Mazda 929

Open Question

How do I replace the battery cable on my 94 mazda protege

I need a diagram to show where the cable goes.

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: Replacement battery

Depending on your engine size it will be one of the following:

1.8L:12V-40AH/5HR

2.0L: 12V-52AH/5HR

Posted on Oct 18, 2008

  • 1 Answer

SOURCE: Blown main fuse on 2003 mazda protege 5.

There are two bolts on the side of the fuse itself. Under the fuse box on each side. Unbolt those and it will come out.

Posted on Dec 23, 2008

michigan man
  • 3533 Answers

SOURCE: need the fuse box diagram

the fuse box lid normally has a diagram on it there is a fuse box under the dash on the driver side and there is one under the hood as well.and if it does not have a diagram stop by the dealer in the parts department and they can print you one if you have an owner manual there is one in there also.

Posted on Feb 11, 2009

c17hydro
  • 2984 Answers

SOURCE: replace alternator belt 97 mazda protege

Look in your engine compartment. Should be a little diagram there, either on the strut tower, the radiator support, or the underside of your hood. Let me know what you find out.

Posted on Mar 10, 2009

c17hydro
  • 2984 Answers

SOURCE: fuse box diagram

Hope this helps...let me know and I will get a better one:

081afc9.gif

Posted on Jun 28, 2009

wrenchjockey
  • 75 Answers

SOURCE: I need a belt diagram for - 2002 mazda protege

7feb5ea.gif

Here you go!

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you show me a diagram of an egr valve for a 1999 mazda protege?


https://www.google.com/search?biw=1536&bih=710&tbm=isch&sa=1&q=99+mazda+protege+egr+locaton&oq=99+mazda+protege+egr+locaton&gs_l=img.12...21014.28237.0.31287.18.14.1.2.2.0.139.1095.13j1.14.0....0...1c.1.64.img..2.7.396...0j0i30j0i8i30j0i24.6332pmbkKZI#imgrc=jJ5CIOyc_k3dbM%3A

Oct 04, 2014 | 1999 Mazda Protege

1 Answer

1999 Protege, need to reset internal comp.


there are more then 1 o2 sensor find out if is a upstream or downstream sensor before installing remove the battery cable this will reset the computer

Mar 03, 2010 | 1999 Mazda Protege

1 Answer

3rd dead battery in 6 months


It's more likely a short circuit somewhere or a sticky door switch. Battery cables can be corroded but not normally bad in that they don't transfer current. Assuming the connections are tight and clean, the problem is probably elsewhere.

Sep 05, 2009 | 2002 Mazda Protege

1 Answer

Need diagram for timing belt for 1991 mazda


here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Aug 09, 2009 | 1991 Mazda Protege

1 Answer

How to replace knock senor switch on 2002 mazda protege 5



Removal & Installation

  1. Disconnect the negative battery cable.
  2. Remove the intake manifold.
  3. Disconnect the sensor connector.
  4. Remove the sensor from the engine block.
  5. Installation is the reverse of the removal procedure.

    0900c1528019fa95.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Knock sensor removal and installation-Mazda 3

  1. Disconnect the negative battery cable.
  2. Remove the intake manifold bracket.
  3. Disconnect the sensor connector.
  4. Remove the sensor from the engine block using special tool 49H018001 or equivalent.
  5. Installation is the reverse of the removal procedure.

    0900c1528019fa96.jpg enlarge_icon.gifenlarge_tooltip.gif GL G

May 09, 2009 | 2002 Mazda Protege

1 Answer

How to replace the serpentine belt of protege 5 2002, also need the routing diagram


Posted by Asker under 1997 Mazda Protege for their 2002 Mazda Protege 5.
Both are included Below

Click on the following free direct Link. It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC In-Line 4-Cylinder Engines; along with various engine options (AC/No AC, etc.). Included are Instrucional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/1997/make/mazda/model/protege/1997_mazda_protege_drive_belt_routing_diagram.htm

Click on the following free direct Link. It has the Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine; along with various engine options (AC/No AC, etc.). Included are Instructional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/2002/make/mazda/model/protege5/2002_mazda_protege5_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 13, 2009 | 1997 Mazda Protege

2 Answers

Replace alternator belt 97 mazda protege


Here's the page from the AutoZone online manual for replacing drive belts.

Mar 10, 2009 | 1998 Mazda Protege

1 Answer

1994 mazda protege overheating fast


You need to Change the Thermostat.

Jan 03, 2009 | 1995 Mazda Protege

Not finding what you are looking for?
1994 Mazda 929 Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...