Question about 1998 Hyundai Elantra

2 Answers

Timing belt i wanna get timing belt fix can you help me please

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You do NOT have to take it to the shop,i´m in the same progress right know. you only have to uptain the right settings or make you´re own marks on the krank and cam wheel´s. then loosen the tensioner,and remove the timingbelt. the only problem you might have is removing the belt because of the engine brakket. simply put a jack under the engine (remember a block of wood between) and remove the brakket. the belt is hidden under a plastik cover witch is easely removed.just use you´re common sens and it is a really easy job.REMEMBER to uptain the right tourqe values for the belt and bolt´s. these can sometimes be aquered at a shop or at haynes .com.

Posted on Sep 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

Timing belt, you have to rip half the motor apart and make sure it's aligned up perfectly. If your asking for help with this, please save yourself the trouble and take it in. If you do it incorectly you'll ruin your valves or more. PLEASE take it in instead.

Posted on Sep 18, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I fix it?

Sounds as if timing belt broke. Find different mechanics.

Jun 23, 2015 | Cars & Trucks

1 Answer

I have a hyundai accent 1.3 1999 model, it jst stop while the engen was running, went to mechanic to check the wiring, he recomended I buy new distributor, I bought it as well as new coil nd plug cable but...

check that the timing belt is not broken
It would have been the first thing a good mechanic would have done
the second thing would have been to run the fault codes to get the fix right.

Mar 24, 2015 | 1999 Hyundai Accent

1 Answer

I need to know if there's a quick easy way to

No easy way that I know of.
You would need to remove the timing belt cover to see the belt and the marks on the gears. You could do a compression test to check the valves but that would not really tell you if the belt is the problem.

Jan 13, 2013 | Cars & Trucks

1 Answer

Belt diagram 1983 cadillac 4.1

"I need all the BELT diagrams for my 1983 Cadillac fleetwood brougham. There are 4 different belts. And the car has been sitting for 3 years. So I wanna replace the belts." ****** yall must cant read? ****

Aug 25, 2012 | Cars & Trucks

1 Answer

Change the waterpump but not the belt car started but after 2 hrs didn't wanna start again plese help I'm a female



Dec 06, 2010 | 2002 Nissan Altima

1 Answer

How to put the timing belt back into my car a 1994 Murcury Tracer. The timing belt had came off the car and I had to go new timing belt to put back into the car and I have no idea how to put a timing belt...

if you have no idea then this is not something you are going to wanna attempt. It is a very delicate proccess. And if you get it wrong you will ruin your engine. By ruin i mean blow it up. The engine has to be exactly in time or it will ruin your valves

Aug 21, 2010 | 1994 Mercury Tracer

1 Answer

My timing belt is ok. the engine still iout if timing

some of the sportages had a problem where the key holding the timing belt pulley on the crank would actually warp and move causing the lower pulley to be out of time. im not an expert on this as i haven't had this exact problem but check to see if the alignment pin on the crank pulley is top dead center when all the marks line up. if not u might need a new crank but i guess moving the lower pulley over a few teeth so it all lines up couldn't hurt

Jan 13, 2009 | 1998 Kia Sportage

2 Answers

Timing belt replacement

i wanna get fix timing belt
how can i do it myself

Jul 25, 2008 | 1998 Hyundai Elantra

Not finding what you are looking for?
1998 Hyundai Elantra Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides