Question about 1999 Ford Expedition

1 Answer

Pass. brake light and middle third light not working

Checked bulbs, and replaced bulb's, and still not working. Drivers side working properly, but middle brake light above rear window isn't working.

Posted by on

  • lilivr112 Oct 22, 2008

    looked at the fuses, and all the light bulbs, all work fine. my break lights do not come on at all, only the turning signal, back up lights, and the regular lights come on.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers

Sounds like your fuses . you should check them

Posted on Sep 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights work but not brake lights 93 toyota camry


The brake light side of the bulbs is powered by the brake switch and travels thru the turn signal switch.
If the third brake light works, I would guess the problem is in the turn signal switch.

Jul 02, 2012 | 1993 Toyota Camry

1 Answer

Is there an adjustment for the stop light switch on a 99 GMC Yukon. I have replace it and my brake lights still do not work. Park lights work fine.


There is no adjustment. The park lights are on a different circuit than the brake lights.
Do you have a third brake light that works. Its also on a different circuit but works from the same switch. Do your turn signals work. They use the same filament as the brake lights.
Also, the brake light circuit goes through the multi function (turn signal) switch.

Since the brake lights and turn signal lights use the same filament in the bulbs, the brake light circuit will pass through the turn signal switch. When a turn signal is used it cancels out the brake light for that side.

Let me know if your third brake light and turn signals work in the rear.
Also, if youy have not already, check/change the bulbs. The type of sockets those lights are in also get burned so look at them well.

Oct 18, 2011 | 1999 GMC Yukon

1 Answer

Neither brake lights on both sides work, but middle light on truck activates, have checked bulbs on both sides and they appear good, also checked fusees which appeared good. Is there a brake relay switch...


Bulbs can look good but still be bad.
The third brake light operates on a seperate circuit than the regular brake lights but still off the same switch (there is no relay).
Put your head under the dash and look up at the brake pedal lever. You should see a bracket with the switch in it.

Sep 22, 2011 | 1999 Pontiac Grand Am GT

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

Brake lights on drivers side not working


IF LIGHT BULBS ARE GOOD.THE BULB SOCKET WORN OR CORRODED.OR GROUND WIRE IS BROKEN OR DISCONNECTED.

Sep 16, 2009 | 1994 Jeep Wrangler

1 Answer

Brake lights not working, but middle brake light works.


Try cleaning the contacts with a wire brush if they appear dirty and then apply a small amount of silicone to the bulb contacts also try replacing the bulb as sometimes they don't appear to be blown but are

Jul 31, 2009 | 2003 Toyota Corolla

Not finding what you are looking for?
1999 Ford Expedition Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...