Question about 1994 Honda Accord

1 Answer

Blinker i changed my head lights and then my blinker quite working and its not a fuse

Posted by on

  • 94hondatuner Jan 07, 2009

    i have a 94 honda accord and the blinkers stopped working..I changed fuses,switchs,relays...nothing.....

  • illicitkid Jan 17, 2009

    My turn signals dont work... front nor rear... the arrow doesnt flash on the dash either... and the illumination doesnt work for the guages... however all the guages work... except for the speedometer... and theres a DRL light that stays on..... will repairing the DRL relay solve all these problems ??

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 350 Answers

Hi i presume you mean your indicaters won,t work since you changed your headlights firstly are the headlights the same as you took out and the wiring connectors the same and what do you mean the indicators don,t work example none of them they run to slow/quick its just the front ones just let me know and we will see if it can be put right yates210456

Posted on Sep 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix 1999 jeep grande Cherokee Laredo left blinker won't work


Check the fuse for it on the fuse panel, the cover usually has a sticker indicating the purpose of each fuse, if that isnt the problem then check your wiring and blinker light female and male end plugs

Dec 21, 2015 | Jeep Cars & Trucks

1 Answer

My blinkers and flashers all quit working at the same time. Indicator lights in the dash won't even light up. Do flashers and blinkers run off the same fuse?


The do not run off the same fuse but they do run off the same blinker. Try turning on the key, click the left/right (check both) turn signal and then operate the 4 ways on and off at the same time. Work the 4 way switch back and forth 10 to 25 times and see if you get any short winks or blinks from the system.
Turn signals are usually on their own fuse in the glove box and hazard are on with the brake fuse. If this does not work, I would look at the blinker. It is possibly bad. Check each pin of the blinker and see if there is power there when you turn on the 4 ways or turn signals. Replace Blinker. Make calls to parts stores and dealer for location of this blinker.

Mar 21, 2010 | 1995 Buick Regal

3 Answers

High-low beams not working


Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Jul 07, 2009 | 2006 Hyundai Accent

1 Answer

Speedometor not working or blinkers


Depends.. If you touched multiple fuse ports with the pliers then yes..

Jul 02, 2009 | 2004 Cadillac Deville

1 Answer

2000 Windstar head light power door lock and front blinker


Check your fuses under hood and on dash. Some of these use two different fuses for rt. & lt. Look in you owners manual for the correct fuses to check. If it is a fuse problem, you will have to find out why the fuse was blown. Good luck

Apr 25, 2009 | 2000 Ford Windstar

1 Answer

1999 VW Passat. Head lights Blower motor blinkers


yes, it's called the load reduction relay and it is in the 13 fold relay panel under driver side dash.

Mar 31, 2009 | 1999 Volkswagen Passat

1 Answer

Turn signals and back up lights dont work, bulbs and fuses good. Blinker lights only work in dash when emergency flashers are on.


Test the circuit board wires on the back side of your taillights where the bulbs go in to see if power is going there with the blinker on, if yes replace the circuit board (quite common with these trucks). If there is no power back there check your flasher relays for each turn signal, assuming they dont click off and on when you tip the turn lever. if all else fails, head for the multifunction switch behind your steering wheel inside the column that your turn signal/wiper/cruise control lever is connected to.

Mar 06, 2009 | 1991 Chevrolet C1500

1 Answer

Horn and blinkers quit working


Consult you owners manual or a repair manual to be certain of which fuse. Or you can always just pull the fuses one at a time until you find the one that is blown (upon visual inpection the metal inside the fuse will no longer be intact). You can also take a test light to check for operation. I prefer one of the first two methods. Hope this helps.

Oct 05, 2008 | 2000 Toyota Tacoma PreRunner

2 Answers

1997 Ford Taurus Blinker Lights


Relay or Flasher unit will be located in or near the fuse box,,,your owners manual will tell you where it is,, they are easy to replace, and cheap to buy.

Sep 26, 2008 | 1997 Ford Taurus

Not finding what you are looking for?
1994 Honda Accord Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...