My turn signal and the hazard won't work. Is my relay gone??

CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

renew the hazard warning light switch as for the reverse lights then renew the switch in the gearbox

I'd check your multi-function switch (on your steering column, what you touch to turn your turn signals on). There is a small metal clip on the base of it that tells your car to turn the turn signals on (right or left). Also trace the wires from the mulit-function switch to your turn signal relay and see if you're getting power when the switch is activated.

check the fuse if good then turn on the hazard lights if they work then you probably need a turn signal flasher which is a separate flasher unit then the hazard one.it usually looks like the hazard one so with the hazards on and locate it then you will know what the signal flasher looks like and you will also know not to change the wrong flasher unit.the signal flasher is often located at or near the under dash fuse panel or somewhere in the dash you don`t say what type of car your talking about.

depending on year,and model.... i would inspect hazard switch. if not a bad switch,a poor connection would be what i would look for.

You need a flasher unit for the hazards.

There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.

it sounds like the relay has gone for your hazard lights, when you press the button to turn them on, it will disconect the power to the main indicators hence wont work when hazards pused in, try locating either the hazard flasher unit, or the relay , have you checked the fuses?

It sounds like the turn signal relay has gone bad, The clicking sound you hear when they work is the relay working, The hazard lights have their own relay that is why they still work. Your owners manual should tell you where to find the relays but if you don't have it anymore turn on the hazards and see if you can follow the noise and both relays should be located in the same place, you should be able to pick one up at any good parts store.

try replacing the hazard relay it should be under the dash try turning it on and off with your head down by the floorboard to pinpoint the right relay and the location. you should be able to hear it easily. hope this helps.