Question about 1999 Ford Taurus

2 Answers

2005 Ford Taurus SE power steering pump

Never changed a pump in a Ford.. the issue is that we cannot seem to get the pump out to get the pulley off to replace the pump. There is a blind stud that goes through the alternator bracket into the wall of the head, there is no room to pull it off that stud to get it out. What can we do about that blind stud?? How do we remove it??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Neighbor had same problem last night. Went the pulley method, but was very difficult. Easier solution is to remove the radiator fluid reservoir, double nut the threaded stud, then turn the inner nut counterclockwise, Out comes the stud. Three bolts hold the bracket on. We took the tensioner off to get at the bottom right one. Good luck

Posted on Nov 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just did it on a 99 sable w/ dual overhead cam.... You need to pull the pulley off first and expose three 10mm mounting bolts. I had a heck of a time getting the return line loose. I think it was a 18mm line wrench,

TR

Posted on Sep 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering pump and tensioner and all power steering belt pulleys changed air removed and steal loud squealing


Hi Tereza.
has anybody checked the pressure hoses of the steering and especially the one which has the one way valve inside whether is the one with the problem?

May 04, 2014 | 2006 Ford Taurus

1 Answer

Power steering stiff and fluid not leaking


Stiff power steering can be the result of low or contaminated power-steering fluid (it may need to be changed or flushed). A loose serpentine belt, a worn out power-steering pump, tie-rod/s or ball-joint/s may be seized, or possibly the rack and pinion may have an internal failure. I listed it in the order that I would check all related items. If you have any questions, findings, or details, please write back. Good luck.

Mar 01, 2014 | 2005 Ford Taurus SE

1 Answer

How do you get your power steering pump bracket off so you can get your power steering pump off a 2004 Ford Tarus


This may be helpful. Not familiar with '04, but 1998 Ford Taurus requires you to first pull off the power steering pump pulley using a pulley tool borrowed from a local parts store. The alternative is to break the pulley (plastic) with a hammer to get to the bolts and then use the pulley tool to
get the rest of the pulley loose and replace with another 10 or 11 dollar pulley after you have remounted the steering pump and bracket. The reason the pulley has to come off is there is another
bolt behind the pulley. Hope this is helpful.

Feb 24, 2011 | 2004 Ford Taurus

1 Answer

Belt routing diagram


SECTION 303-05: Accessory Drive 2006 Taurus Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 03/29/2005 Accessory Drive adobe.gif Printable View (137 KB) Accessory Drive Belt Routing
Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 19D784 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6A312 Crankshaft pulley 8 8A528 Coolant pump pulley This vehicle is equipped with:
  • a V-ribbed serpentine accessory drive belt.
  • automatic drive belt tensioner(s).
  • a V-ribbed coolant pump belt.
New drive belts should be of the same type as originally installed.

2010&c18=modelyear&c20=n891472&c35=wsm%2caccessory%20drive%2cs6h%2c303-05%2cdescription%20and%20operation&s=1366x768&c=32&j=1.3&v=y&k=y&bw=995&bh=428&ct=lan&hp=n&[aqe] ddll111_5.jpg

Dec 31, 2010 | 2006 Ford Taurus

1 Answer

What to expect replacing power steering pulley, 2000 Taurus dohc duratec sel.


Replace the entire pump if you have pulley issues. No one presses off pulleys on steering pumps, even though you see pullers advertised.

Jul 28, 2010 | 2000 Ford Taurus

2 Answers

How to put on the main drive belt


Not sure what engine you have so here is both.
16f7845.gif

Item Part Number Description 1 10346 Generator 2 6B209 Drive Belt Tensioner 3 3A674 Power Steering Pump 4 19703 A/C Compressor 5 6A312 Crankshaft Pulley 6 6C348 Idler Pulley 7 8501 Water Pump 8 8620 Drive Belt


3877008.gif

Item Part Number Description 1 10346 Generator 2 3A674 Power Steering Pump 3 19703 A/C Compressor 4 6C348 Idler Pulley 5 6B321 Crankshaft Vibration Damper and Pulley 6 8501 Water Pump 7 6B209 Drive Belt Tensioner 8 8620 Drive Belt

Jul 21, 2010 | 1994 Ford Taurus

1 Answer

Serpentine belt diagrm


Not sure if you have the 3.0L 2V or the 3L 4V so heres both. Hope it helps.. Cobra,, :-)
Accessory Drive Component Locations 3.0L (2V)a0007698.gif
Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley

Component Locations 3.0L (4V)a0007699.gif
Item Part Number Description 1 3A733 Power steering pump pulley 2 8509 Water pump pulley 3 2E884 A/C clutch pulley 4 8620 Drive belt 5 6312 Crankshaft pulley 6 6B209 Drive belt tensioner pulley 7 10346 Generator pulley

Jun 05, 2010 | 2000 Ford Taurus

1 Answer

97 ford taurus power steering pulley


pull the pully back off ,clean the shaft with emery cloth and also the the shaft hole in the pully then grease it up and try it again

Mar 14, 2009 | 1997 Ford Taurus

2 Answers

I need a diagram for a serpentine belt, for a 2000 ford taurus se


Starting at the crankshaft pulley, and going clockwise, the belt leaves the crank pulley,
Goes around the tensioner,
Goes around the water pump
Goes around the alternator
Goes around the upper idler
Goes around the Power Steering pump
Goes around the air conditioner pulley
then goes back to the Crank pulley


Sep 06, 2008 | 2000 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...