At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The motor in the washer bottle is not working when i push the button but it's not the fuse and as far as i can tell its no the wiper stem because the wipers work
Re: The motor in the washer bottle is not working when i...
THE WASHER MOTOR COULD BE BAD IF CHECK TO SEE IF POWER GOING TO WASHER MOTOR IF NO EITHER FUSE BAD OR SWITCH BAD OR HAS A LOOSE WIRE.IF POWER GOING WASHER MOTOR.THE WASHER MOTOR BAD.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the washer pump for the rear window is located in the washer bottle under the hood that the front washer work out of. the pump may have stopped working and needs replacing. have someone operate the rear washers and listen at the washer bottle to see if you hear the motor working. if not then you will have to check the plug connection for the rear washer pump for corrosion, broken wires and power and grounds. if these check out ok then replace the rear washer pump in the bottle.
As far as the horn goes it sounds like the horn is bad sometimes works and sometimes not, the washers may have a bad washer pump, you will need to locate the washer bottle, this is the bottle that you fill with window washer fluid, at the bottom of the bottle is a pump, you will need to first make sure the plug that connects to the washer pump is not corroded or loose if it is okay then replace the pump, a sure test would be to use a testlight and test for power and ground to pump while someone hits the wash button, but i can tell you this. if the wipers work then it will not be a fuse problem, it will be a bad motor or connection, the pump will pull right out of bottle and new one will pop in,
Check if you have fluid in the washer bottle. Take a fine needle and clear out the nozzles that spray on the screen, try the washer again, you should be able to hear the motor running. If there is no sound, check the motor/pump, it will be located near or in the washer bottle. The wiper and washer normally share the same fuse.
×