Question about 2002 Bentley Arnage
Hi, David Neidl here, I have an extensively modified Bentley Arnage T, 2002. The factory trans was discarded to allow for an all wheel drive convertion and the body was altered by Genaddi Design Group.
I have the trans working in all functioning gears with default shift patterns using a PLC provided by powertrain control solutions, and now i have to enable the speedometer operation. I need the wiring diagram for the cluster (speedo) and if you can find out what type of signal is used to drive the speedo, is it a stepper motor type or variable voltage type- can I get a signal wire at the ecm/pcm.
Also I need same information for engine coolant temp.
I also need to know where to tap into to get an engine rpm/tach reading for the trans control module, what type of signal is it, digital or analog?
Tips for a great answer:
Oct 31, 2014 | 2000 Bentley Arnage
Feb 06, 2014 | 2002 Bentley Arnage
Feb 23, 2010 | 2002 Bentley Arnage
Oct 01, 2009 | 2003 Bentley Arnage
Aug 27, 2009 | 2002 Bentley Arnage
785 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: