1991 Oldsmobile Eighty Eight Logo

Related Topics:

jaclyn smith Posted on Sep 18, 2011

Front windows don't work but the back ones work what could be the problem

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 2 Answers
  • Posted on Jan 08, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 10, 2011
Answers
2
Questions
2
Helped
357
Points
2

MY PASSENGER SIDE WINDOW DOESNT WORK AND MY BACK WINDOWS YOU HAVE TO PULL UP WITH YOUR HANDS.

3 Related Answers

Anonymous

  • 52 Answers
  • Posted on Nov 09, 2011

SOURCE: 2000 subaru outlook windows don't work ... one

Replace your power window switch. ( The whole unit where all of your switches are for all four windows)

Ad

khaled hussien

  • 328 Answers
  • Posted on Jun 02, 2011

SOURCE: I let the windows up

its probably relay and / or fuse problem

Philip Armitage

  • 437 Answers
  • Posted on Oct 29, 2011

SOURCE: power door locks don't work; interior lights

these trucks have a generic body control module in the left kickpanel. just remove the plastic trim from the drivers floor molding to access the module. inspect the wire for green dust or gel. if there is signs of this then you have a corrosion problem. disconnect you battery and then try cleaning the corrosion all off using contact cleaner and penetrating oil. once the corrosion is gone then reconnect everything and try to see if it works. If not then it is possible that the module is damaged. you will need a new one.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 1991 celica and for some reason the front signals does not work at all. When I turn on the blinkers it blink really fast on both sides but hazard light works fine it blinks normal but it...

check the main earth wire near the battery. and one near the rear of the lights. unbolt them and clean the connectors up put some grease on them after. then check again. remember that when the earth wires come off the radio code will be needed to reset the the radio. be safe and take the battery off.
0helpful
1answer

Power windows don't work

Check your fuse box ,on newer cars and trucks they are large metal encased fuses usually under the hood in relay box or under back seat,should be able to find exact location in owners manual .
0helpful
1answer

Rear power windows don't work on 2002 envoy

may the switch from the front went out

if you can roll the back windows down the back doors then i would check the window motors
0helpful
1answer

Location of fuses for front power windows for 2001 Chevy Suburban

That info is on the owners manual, if you don't have the manual you can download one for free at the GM owners site by clicking HERE
0helpful
1answer

Power windows don't work

i would ck the driver front window switch
0helpful
1answer

I have a 1990 Ford Taurus and my blinkers don't

blinkers sounds like the flasher unit is not working. It's located under dash. Also check for burnt out bulbs.
Rear defrost, or rear defogger?: Your defogger for the rear window would run off a relay, probably located in the fuse panel of your car. Often, the connections at the rear window get broke or disconnected.
Front defrost: does your heater blower work?
2helpful
1answer
0helpful
1answer

The headlights work but turn signals don't and hazards don't work either and brakelights still don't come on.

one bad bulb will be your problem. Doesn't matter which side. If one bulb is bad in the front or in the back, left or right, then you have the problem you are having. Check your fuses first. Little easier to change a fuse than a bulb.
2helpful
1answer

Passenger side rear window will not goup,I have had both front wiring harness replaced,pulled rubber boot back it looks like and orange and gray wire are broke,cost me 200.00+ on each front window part was...

If you have already identified the broken wire, get a piece of shrink tubing and slide it on one end, put the wire ends back together and solder them. slide the shrink tube over the repair and heat it up (usually a lighter works fine just don't melt it). After it's working again, send me the extra money
(only kidding) If you aren't good at soldering, practice on another piece of scrap wire before you try it.
Not finding what you are looking for?

56 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...