Question about 2001 Pontiac Bonneville

1 Answer

Rear end drifts in turns

I have a 01 Bonneville and my dash reads to service the stability system. Also I have noticed my rear drifts when making turns on the highway. What is needed to resolve this problem. Can I fix or service this problem myself or should I go to a shop?
Brian Douglas

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 63 Answers

Check stabalizer pins

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was driving and all of a sudden all of this pops up I drive a 2006 suburban. Can someone help me figure out what this all means?


Search Results

    'Service Stability' Message flashing on dash. What does this ...

    repairpal.com > ... > Suburban 1500 > 2006 Chevrolet Suburban 1500
    Jun 7, 2012 - What does this mean? never seen b4 on 2006 Chevrolet Suburban 1500... 2006 Chevrolet Suburban 1500; >; 'Service Stability' Message ...

    Service Stability System Warning - Help! - Chevrolet Forum - Chevy ...

    chevroletforum.com > ... > Tahoe & Suburban
    Sep 1, 2012 - Tahoe & Suburban The power, space, and brutal towing ability make the Tahoe and its longer sibling, ... the ABS light, and the Stability Control light are all on and the DIC says Service Stability System. ... Join Date: Apr 2006. Service Stability, ABS and Traction Lights On - Chevrolet Forum ...
    Feb 20, 2014
    HELP - Service Stabilitrak & Service Traction Control - Chevrolet ...
    Aug 30, 2011
    Service Traction Control - Stabilitrak and ABS light, Help ...
    Feb 12, 2011
    More results from chevroletforum.com

    Chevrolet Suburban 1500 LTZ: Yesterday I was cruising down

    www.justanswer.com > Chevy
    Yesterday I was cruising down the highway in my 2006 Suburban LTZ and I got "Service Stability" message and the Traction Control light and ABS light are lit.

Feb 08, 2016 | Cars & Trucks

1 Answer

Gauge Info. display reads service stability system.


To start you have to run the codes from the stability control module, and once that's done then you can beging to look for the problem, only a tech II scanner can reset this module, also make sure all tires are the same size

Mar 17, 2015 | 2003 Buick Park Avenue

1 Answer

My eclipse spyder 03 started making that noise like a week ago on the drivers side ? Anybody help plz!!!!


There are many possibilities that can cause car to make noise.

It's actually from where the noise is coming from. Front end or rear end. From engine area or from inside the steering or from brakes.


There is N-number of possibilities for the car to make whining noise or any other kind of noise.


---------

For step by step troubleshooting this problem, I suggest you to refer the help links mentioned below. Its a complete solution with proper explanation to identify the cause of problem: ------


Click the link below: -----

Car makes clicking noise?

http://howtobyme.blogspot.com/2011/11/car-makes-clicking-noise.html

--------------

Car makes whining noise like driving on rough pavement?

http://howtobyme.blogspot.com/2011/12/car-makes-whining-noise-like-driving-on.html

------------

Chirping Noise From Car?

http://technoanswers.blogspot.com/2011/11/chirping-noise-from-car.html

----------------

What are the possibilities for Clicking noise in car?

http://technoanswers.blogspot.com/2011/11/what-are-possibilities-for-clicking.html

--------------

Squealing at start up on car?

http://technoanswers.blogspot.com/2012/01/squealing-at-start-up-on-car.html

--------------

Chirping sound coming from engine?

http://technoanswers.blogspot.in/2012/01/chirping-sound-coming-from-engine.html

-----------

Vehicle making Clunk Thump Thud noise?

http://howtobyme.blogspot.in/2012/03/vehicle-making-clunk-thump-thud-noise.html

------------


4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

--------------

Heater makes clicking noise under dash on Ford Explorer?

http://technoanswers.blogspot.in/2012/01/heater-makes-clicking-noise-under-dash.html

---------------

Clicking noise under dash and front defroster not working?

http://technoanswers.blogspot.com/2012/01/clicking-noise-under-dash-and-front.html

------------------

Car Brakes Making Noise?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

---------------

Car Alternator making noise?

http://repairhelpcenter.blogspot.com/2011/11/car-alternator-making-noise.html

-----------------

Car Alternator Bearing Makes Grinding noise?

http://repairhelpcenter.blogspot.com/2011/12/car-alternator-bearing-makes-grinding.html

----------------

Engine makes noise and Cooling Fan belt Breaks?

http://howtobyme.blogspot.com/2011/12/engine-makes-noise-and-cooling-fan-belt.html

--------------

Vehicle Makes Clicking Sound While Taking turns?

http://schematicsdiagram.blogspot.com/2011/12/vehicle-makes-clicking-sound-while.html

-------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

-----------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Chevrolet k1500 whining noise


There are many possibilities that can cause car to make noise.
Its actually from where the noise is coming from.Front end or rear end.From engine area or from inside from steering or from breaks.

There are N-number of possibilities for the car to make whining noise or any other kind of noise.

---------
For step by step troubleshooting these problem,i suggest you to refer the help links mentioned below.Its a complete solution with proper explanation to identify the cause of problem:------

Click the link below:-----

Car makes clicking noise?

http://howtobyme.blogspot.com/2011/11/car-makes-clicking-noise.html

--------------

Car makes whining noise like driving on rough pavement?

http://howtobyme.blogspot.com/2011/12/car-makes-whining-noise-like-driving-on.html

------------

Chirping Noise From Car?

http://technoanswers.blogspot.com/2011/11/chirping-noise-from-car.html

----------------

What are the possibilities for Clicking noise in car?

http://technoanswers.blogspot.com/2011/11/what-are-possibilities-for-clicking.html

--------------

Squealing at start up on car?

http://technoanswers.blogspot.com/2012/01/squealing-at-start-up-on-car.html

--------------

Chirping sound coming from engine?

http://technoanswers.blogspot.in/2012/01/chirping-sound-coming-from-engine.html

-----------

Vehicle making Clunk Thump Thud noise?

http://howtobyme.blogspot.in/2012/03/vehicle-making-clunk-thump-thud-noise.html

------------


4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

--------------

Heater makes clicking noise under dash on Ford Explorer?

http://technoanswers.blogspot.in/2012/01/heater-makes-clicking-noise-under-dash.html

---------------

Clicking noise under dash and front defroster not working?

http://technoanswers.blogspot.com/2012/01/clicking-noise-under-dash-and-front.html

------------------

Car Brakes Making Noise?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

---------------

Car Alternator making noise?

http://repairhelpcenter.blogspot.com/2011/11/car-alternator-making-noise.html

-----------------

Car Alternator Bearing Makes Grinding noise?

http://repairhelpcenter.blogspot.com/2011/12/car-alternator-bearing-makes-grinding.html

----------------

Engine makes noise and Cooling Fan belt Breaks?

http://howtobyme.blogspot.com/2011/12/engine-makes-noise-and-cooling-fan-belt.html

--------------

Vehicle Makes Clicking Sound While Taking turns?

http://schematicsdiagram.blogspot.com/2011/12/vehicle-makes-clicking-sound-while.html

-------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

-----------

These will help.

Thanks.

Nov 28, 2012 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Corvette sway bar installation


Stabilizer Bar: Service and Repair
Front
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
4. Remove the stabilizer shaft insulator clamps from the front crossmember.
5. Remove the stabilizer shaft from the vehicle.
Installation Procedure
1. Install the stabilizer shaft, insulator clamps and bolts to the crossmember.
2. Install the stabilizer shaft links to the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the stabilizer shaft link nuts.
- Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).
4. Install the stabilizer shaft insulator clamp bolts.
- Tighten the stabilizer shaft insulator clamp bolts to 58 Nm (43 ft. lbs.).
5. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
6. Lower the vehicle.



Stabilizer Bar: Service and Repair
Rear
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
4. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
5. Remove the stabilizer shaft from the vehicle.
Installation Procedure
1. Install the stabilizer shaft to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the stabilizer shaft insulator clamps to the stabilizer shaft and the crossmember.
- Tighten the stabilizer shaft insulator clamp bolts to 65 Nm (49 ft. lbs.).
- Tighten the stabilizer shaft insulator clamp nuts to 95 Nm (70 ft. lbs.).
3. Install the stabilizer shaft links to the stabilizer shaft.
- Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).
4. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
5. Lower the vehicle.


Oct 30, 2009 | 2001 Chevrolet Corvette

1 Answer

"Service Stability System"


Try this website, all Bonneville owners , they have been through the same issues.
http://www.pontiacbonnevilleclub.com/forum/

Nov 26, 2008 | 2001 Pontiac Bonneville

2 Answers

Stability system The "service stability system" light as well as the ABS and Brake lights have gone on. Is this a major repair? SHould the car serviced by a dealer? this is on a 2000 bonneville ssei.


the service stability light as well as the abs light is all conected to the wheel sensor. To fix it is simple if you kn,w how to do a brake job,it is all conected to the hub assembly. I replaced both front wheel sensors due to that problem. you can by the hub assembly for around 100.00 dollars at auto zone. the wire that connects to the wheel always breaks and these codes come up.

Aug 25, 2008 | 2000 Pontiac Bonneville

1 Answer

What is the procedure to replace the drivers side axle (CV joints)on a 1999 Chevy Cavalier. I have the new axle just need the remove and replace procedure


You don't need the special tools that they use in this procedure, you can use a hammer and a block of wood to get the axle out of the hub and you can use a pry bar to get the axle out of the transmisson.



Notice: Care must be exercised to prevent the constant-velocity joints from being over-extended. When either end of the drive axle is disconnected, over-extension of the joint could result in separation of internal components and possible joint failure. Drive axle joints and seals should be protected any time service is performed on or near the drive axles. Failure to observe this can result in interior joint or seal damage and possible joint failure.
Notice: Prior to removal of drive axle assembly, cover all sharp edges in the area of the drive axle with shop towels so that the seal is not damaged during removal.
Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and the wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Place shop towels underneath the outer joint to protect from any sharp edges.

  4. 141983.gif
    tif.gif
  5. Insert a drift (1) into the caliper and the rotor to prevent the rotor from turning.
  6. Remove the drive axle nut (2) and the washer.
  7. Remove the lower ball join from the steering knuckle. Refer to Lower Control Arm Ball Joint Replacement in Front Suspension. If you remove the right axle, turn the wheel to the left. If you remove the left axle, turn the wheel to the right.
  8. Disconnect the wheel speed speed sensor harness. Refer to Wheel Speed Sensor Replacement in Antilock Brake System.
  9. Disconnect the stabilizer link from the lower control arm. Refer to Stabilizer Shaft Link Replacement in Front Suspension.

  10. 442393.gif
    tif.gif
  11. Use the J 28733-B in order to disengage the axle from the hub and the bearing.
  12. Separate the hub and the bearing assembly from the drive axle. Move the strut and the knuckle assembly rearward.

  13. 500285.gif
    tif.gif
  14. Remove the inner joint from the transaxle using J 33008 attached to J 29794 and J 2619-01 for the intermediate shaft, if equipped.
Installation Procedure Notice: Prior to installation of drive axle assembly, cover all sharp edges in the area of the drive axle with shop towels so that the seal is not damaged during installation.
Any time the front halfshaft is removed, the transmission (the halfshaft male and female shank) and the knuckle sealing surfaces should be inspected for debris or corrosion.
If debris or corrosion are present on the sealing surfaces, clean them with a 320 grit cloth or equivalent. Transmission fluid may be used to clean off any of the remaining debris. The surface should be wiped dry, and the halfshaft should be reinstalled free of any debris or corrosion buildup.

    189013.gif
    tif.gif
  1. Install the drive axle (2) into the transaxle (1). Place a non-ferrous drift into the groove on the joint housing and then tap until the drift is seated. Be careful not to damage the axle seal or dislodge the seal garter spring when you install the axle.

  2. 442471.gif
    tif.gif
    Important: Verify that the drive axle is seated by grasping on the inner joint housing and pulling outboard.
  3. Install the drive axle (1) into the hub and bearing assembly (2).
  4. Install the stabilizer link. Refer to Stabilizer Shaft Link Replacement in Front Suspension.
  5. Connect the wheel speed sensor harness. Refer to Wheel Speed Sensor Replacement in Antilock Brake System.
  6. Install the lower ball joint to the steering knuckle. Refer to Lower Control Arm Ball Joint Replacement in Front Suspension.

  7. 141983.gif
    tif.gif
    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  8. Install the washer and the new drive axle nut (2).
  9. Insert a drift (1) into the caliper and the rotor in order to prevent the rotor from turning.
    Tighten
    Tighten the drive axle nut to 200 N·m (144 lb ft).
  10. Install the tire and the wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  11. Lower the vehicle

Aug 02, 2008 | 1998 Chevrolet Cavalier

1 Answer

Lights will not turn off


My friend has just installed new rotors and brake shoes on the rear of my 99 deville. The service stability system light flashes on and off and dings, as it flashes. Also, the traction control light is on at the top of the dash. How do I go about cancelling these anoying lights out on my dash??!! Please, somebody help me.

Eric D.

Jun 11, 2008 | 1999 Cadillac DeVille

Not finding what you are looking for?
2001 Pontiac Bonneville Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...