Question about Toyota Camry
Remove the plastic screw covers at the forward edge of the door. Remove the 2 gold coloured screws.
Using a flat blade screwdriver, insert the blade above & below the locking thing at the door handle, pry up and down, top & bottom respectively. Slide & pull the handle out, remove the rod going to the handle.
Remove the 2 big screws for the door panel. 1 is under a small trim cover, the other is under the armrest
Remove the lower light & unplug it (if you have one) which may be under the arm rest (it pops out)
Press the centers of the 2 round push clips that are on the rear edge of the door panel and pull the clips out
Remove any screws at the bottom of the door panel (if you have them)
Starting at the bottom of the panel pull straight out with steady, even pressure as to not snap the plastic clips. After the bottom & side clips are disconnected from the door, lift the top of the panel straight up.
Remove the plastic sheet that covers the inner shell of the door.
Uning a 10 millimeter socket, remove the bolts that holds the window onto the regulator
Remove the window, up & out thru the top of the door
Unbolt & replace the regulator.
Posted on Sep 16, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 25, 2011 | 1993 Toyota Camry V6
Dec 11, 2010 | 2004 Toyota Camry
Dec 05, 2010 | 1996 Toyota Camry
Mar 07, 2010 | 2001 Toyota Camry
Jun 06, 2009 | 1993 Toyota Camry V6
Apr 16, 2009 | 1993 Toyota Camry V6
Mar 20, 2009 | 1993 Toyota Camry V6
Mar 14, 2009 | 1995 Toyota Camry
Jul 25, 2008 | 1999 Toyota Camry
690 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: