Question about 1995 GMC Jimmy

2 Answers

1995 gmc Jimmy

My 1995 GMC Jimmy starts and runs fine when it's cold. After the engine heats up (10 miles or so) it doesn't want to start and when it does, you have to bury your foot in the gas and rev it up. Sometimes it runs rough when you idle at a stop light. I replaced the injector spider, throttle positioning sensor, and EGR valve. The fuel pump is a Delco and it's about 2 years old.

Posted by on

  • 2 more comments 
  • shvlhead79 Sep 17, 2008

    The ignition coil is fine and there's plenty of spark. I checked the fuel pressure with a hot engine and I had 60psi.

  • kmoutzouris Sep 30, 2008

    I have the same problem cold start is fine once I get to work it starts idling rough and when I leave work I have to step on the gas pedal to get it going

  • Anonymous Mar 13, 2014

    WHAT SIZE ARE THE CONNECTORS ON THE FUEL LINES

  • Anonymous Mar 30, 2014

    It starts and runs fine. But when you try to drive it there isn't much power. It will only go about 40 miles an hour if your lucky.you don't even have to press the p[eddle for it to do that once it gets up there. It just revs the engine instead of going faster.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Timing is off try the timming senser

Posted on Oct 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 46 Answers

Maybe bad ignition module or coil.. when they get hot sometimes they wanna die...

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 95 gmc wont start when hot starts and runs cold


Im guessing it's a 4.3 L engine. Sounds like your coil is acting up when the truck heats up. Bad coil, or small wires going to the coil

Apr 13, 2014 | 1995 GMC Sierra C1500

1 Answer

I have a 95 gmc jimmy i replaced the fuel pump and changed the wires plugs rotor and cap now it wont start


Hi, Were the parts replaced due to a no start condition? Is there a trouble code stored in the PCM or an engine light on? How many miles are on the truck?

Oct 05, 2011 | 1995 GMC Jimmy

1 Answer

2000 GMC Jimmy starts fine, is hesitating/ sputtering to go when I start off from a red light. It seems like when it is about to hit 2RPM.


Check fuel pressure at schrader valve on fuel rail while key on and engine not running. Spec is 55 to 61 PSI. If it is lower than 55 PSI, replace fuel pump and fuel filter.

Feb 21, 2010 | 1995 GMC Jimmy

5 Answers

1994 GMC Jimmy engine runs rough when cold; smooths out when warm


you need to have the codes checked to know what direction to start repairs,Autozone does this for free

Jan 20, 2010 | 1994 GMC Jimmy

2 Answers

96 jimmy shuts off while running and will turn back on, changed control module and the throttle body and MAF sensor. told by dealer to change this and problem would be fixed, problem not fixed.


i have had problems with the fuel pump relays heating up and loosing contact. it will not trigger a code and the only way to track it is to attatch a fuel pressure gauge to the system and wait for it to die. chances are you will see the pressure drop to 0 psi.

Nov 03, 2009 | 1997 GMC Jimmy

1 Answer

1995 gmc jimmy-won't accelerate wants to stall


could be the fuel pump ...you will need to do a fuel pressure test on it ..the pressure should be 63 anything lower even so much as a few lbs will cause this to happen ...as well if it sat that long i would consider a complete tune up and check all vacuum lines for dry-rot


Sep 14, 2009 | 1995 GMC Jimmy

1 Answer

1995 Gmc Jimmy Starting Problem


If the engine is using a carburetor, the top gasket maybe leaking evaporating the fuel in the bowl. Check or replace the solenoid switch on the starter body.

Jun 01, 2009 | 1996 GMC Jimmy

1 Answer

91 jimmy starts cold, runs rough hot, dies when put in drive


Try to unplug the mass airflow sensor and start it. It will idle higher but should run fine. If it works then you need a MAF sensor. Be sure you have an OBDII code puller to clear the computer when done

Jan 25, 2009 | 1995 GMC Jimmy

Not finding what you are looking for?
1995 GMC Jimmy Logo

Related Topics:

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...