Question about 2000 Ford Expedition

3 Answers

Mass Air Flow Sensor, oxygen sensor and coil plugs

My 1998 ford exp 5.4L is running ruff and misfiring code are p075,p0136, p0156, p0171,p0174, p01131 &p01151

Posted by on

  • 4 more comments 
  • Anonymous Jan 06, 2009

    i have a light turning on dash "Service Engine Soon" and i checked the code and it is P0171. Now it could be fuel pressure or mass air flow sensor, i am not sure how to fix this problem.

  • Anonymous Jan 27, 2009

    cant turn engine light of

  • Anonymous Jan 27, 2009

    cant turn engien light of.

  • Anonymous Mar 16, 2014

    engine code p075 on acura 2.5 tl 1998

  • Anonymous Mar 20, 2014

    the car want stay running while mass air flow is plug up

  • Anonymous Mar 20, 2014

    Sounds like fuel or air sensor

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check vacumn harness on back of plenum that goes to pcv valve on pass side valve cover

Posted on Mar 25, 2013

  • jeffrey gosnell Mar 25, 2013

    check vacumn harness on back of plenum that goes to pcv valve on pass side valve cover

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have codes 172 & 175 (Fuel trim bank 1 & 2, running to rich) So I was told to replace the Mass Air Flow Sensor. Easy install but very expensive ($150). We'll see if the service engine light comes back on.

Posted on Jun 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

Look for vacuum leaks the last 4 codes are lean codes
primarily lookm at the pcv hose noturious for collapsing

Posted on Sep 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have code P0171 on 2013 Escape


P0171 FORD - Fuel Injection System Too Lean Bank 1xicon.jpghttp://engine-codes.com/p0171_ford.htmlForum CodePossible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replaced the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced

Nov 05, 2012 | Cars & Trucks

1 Answer

Fault code p0171 what the problem


P0171 - System Too Lean Bank 1
Possible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replaced the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced.

Oct 09, 2012 | 2001 Renault Sportwagon

1 Answer

Scanned my computer , came up with a PO 171 and 174 what does this mean?


P0171 AND P0174
P0171 - System Too Engine Cylinder Lean Bank 1xicon.jpghttp://engine-codes.com/p0171.htmlForum CodePossible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes Dirty air filter of faulty air flow sensor are common causes for the P0171 code of the problem.


P0174 FORD - Fuel Injection System Too Lean Bank 2xicon.jpghttp://engine-codes.com/p0174_ford.htmlForum CodePossible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes The codes is usually set when there is an intake leak after the air flow meter, before replacing any parts check for loose or broken hoses and intake gasket leak. On Ford some models dirty air filter, and dirty or faulty air flow sensor are the cause of the problem.

Jul 27, 2012 | Cars & Trucks

2 Answers

Check engine light on; engine codes P0171 and P0174


p0171 is lean exhaust bank one ( passenger side) and p0174 is lean exhaust bank 2 ( drivers side). First we need to look for vacuum leaks, low fuel pressure, Intake air leaks after the mass air flow sensor, pvc system. Because you have both sides lean I would start looking at these spots.

May 23, 2011 | 1998 Ford F150 Regular Cab

1 Answer

I have a 04 expedition the engine light came on the code read po171 and po174 it die out when I'm at a red light but cranks back up missing bad when it warms up


P0171 - Fuel Injection System Too Lean Bank 1
Possible Causes:
- Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection

P0174 - Fuel Injection System Too Lean Bank 2
Possible Causes:
- Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection

Jan 14, 2011 | 1998 Ford Expedition

1 Answer

OBDII SETS CODES P0401, P0171 & P0174 . 1998 Mercury Sable


P0401- Exhaust Gas Recirculation Flow Insufficient Dectected
Possible causes - Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control valve stuck closed
- EGR volume control solenoid valve
- Dead (Weak) battery
- EGR passage clogged
- Exhaust gas leaks Possible solution - Clean EGR Valve
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve
Code P0171- Fuel Injection System Too Lean Bank 1 Possible causes - Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection Possible solution Dirty air filter of faulty air flow sensor are common causes of the problem P0174- Fuel Injection System Too Lean Bank 2 Possible causes - Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection Possible solution Dirty air filter of faulty air flow sensor are common causes of the problem.

Jun 28, 2010 | 1998 Mercury Sable

3 Answers

2003 Ford Ranger 4x4 extended cab- diagnostics checked and got these codes- P0171, P0174, P0300, P0316. Can you tell me what they mean?


P0171------ system too lean bank#1
Po174------ system too lean bank#2
For these 2 codes, try cleaning the maf sensor (mass air flow), that is mounted in the big black hose that goes from the air filter housing to the throttle plate, if it is dirty, that will cause those 02 sensors to send a signal to the computor to lean the air fuel mixture. If cleaning it doesn't work, the sensors will probably need changing.
P0300---- Random/multiple cylinder misfire
P0316---- Cylinder misfire at start up---- first 100 revolutions.
On those 2 codes, you have to do some testing to find out why there is a misfire.
Possible causes:
dirty/malfunctioning injectors
weak coil pack
fowling spark plugs/wires
Low fuel pressure

May 11, 2010 | 2003 Ford Ranger Regular Cab

1 Answer

Ford windstar check engine light comes on after stopping when starting to get moving again shows p0171 & p0174 codes why??


P0171 indicates a lean condition. The most common cause of this is a defective mass air flow sensor. Also check if any vacuum leaks. P0174 OBD-II Trouble Code


Technical Description

System Too Lean (Bank 2)


What does that mean?

Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust.

Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time.

-----------

Thanks.


Dec 17, 2009 | 2002 Ford Windstar Cargo

2 Answers

98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+


po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Dec 15, 2008 | 2003 Ford E250

4 Answers

Misfiring


An O2 sensor will not cause a miss, period. I would think the problem may lie with the #3 coil, or the wiring to it. What are the trouble code(s), give me those and I can be more helpful

Jul 17, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

2,484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...