Question about 1998 Jeep Cherokee

1 Answer

Horn no is working. The horn is weel but nothing happen push horn button.

Posted by on

  • dee_flat1906 Jan 13, 2009

    I just changed the fuse and the horn is still not working? What else do I need to check?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 242 Answers

If you hear a click the power is working the relay. If no click under dash, possibly bad fuse or relay. If you hear relay, test horn. Unplug horn and run a 12V jumper to see if it beeps. If it doesn't, try to redo the ground and then test. Then if that doesn't work, replace horn.

Posted on Sep 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my horn to work on steering the horn does work on my remote key only


ck to see if you are getting power to your horn itself when you push the horn button if you are not ck you horn relay under the dash , the remote is setup for the unlock nothing to do with the other

Jan 19, 2015 | Cars & Trucks

1 Answer

I have a 94 Acura Integra LS 1.8 DOHC. I bought it 4 months ago. The cruise control and horn don't work. I would be very appreciative of any advice that may help. The green light on the cruise button...


Sounds like to me someone might have taken the steering wheel apart at sometime...and might not have reconnected the horn and the cruise control properly...i have seen that before...does not hurt to check that

Apr 08, 2017 | Cars & Trucks

1 Answer

I have a 94 Acura Integra LS 1.8 DOHC. I bought it 4 months ago. The cruise control and horn don't work. I would be very appreciative of any advice that may help. The green light on the cruise button...


The cruise control requires input from the speed sensor(s) in order to engage. This may not be happening.

The horn relay may be clicking but the horn may have failed. The horn is located under the hood.

May 22, 2014 | Cars & Trucks

1 Answer

My horn will not work


probably a bad ground ,,,,pull horn off and clean if it looks rusty where it bolts up ...also if you pwr feed the horn does it work? cpl things to chk on

Nov 05, 2012 | 2005 Chevrolet Cavalier

1 Answer

The horn of my KIA CArens has stopped working. I suspect something at the push at the steeing wheel. Any help


check horn fuse
measure voltage at horn
one wire will be earthed to car body hopefully and the other wire will get plus 12 volts when the horn is pressed.
or one wire is always 12 volts and the other wire is connected to earth when horn button pressed.
check fire wall of car some kia have horn on firewall in engine compartment. or it is under the grill in front of car.

Sep 07, 2012 | 2005 Kia Carens

1 Answer

My horn has quit working on my 1997 Honda Odyssey. When I push the button, nothing happens. What do I do?


Check the horn fuse first, if thats ok check the connections at the siren/relay under the hood.

If all ok suspect siren and or relay.

Dec 15, 2010 | 1997 Honda Odyssey

1 Answer

Horn dosent work, dont know if iam missing anything i know the wires arent hooked up but tried and still nothing hooked horn to battery and it worked, i dont know if iam missing anythin from the steering...


take a test light and hocke it up in wire for horn under car ground test light.have someone push horn if it does not light work your way back fuse horn button etc it allso a horn realy

Mar 27, 2010 | 1988 Chevrolet Camaro

1 Answer

Push cruise control button, noyhing happens, horn


broken wire going up the steering column.

Feb 05, 2010 | 1999 Jeep Grand Cherokee

1 Answer

My horn quit working but the relay and fuse are still good. Am still getting current to these places. But when you push the horn button..nothing happens. 2004 chevy cavalier. 2 door hardtop.


It sounds like the switch itself, on the steering wheel, are not making contact. I'm guessing that if you can remove the front part of the steering wheel you could check and clean the contacts and also give you a chance to test the horn, while you are in there.

Jul 04, 2009 | 2003 Chevrolet Cavalier

1 Answer

Horn broken


get one of those bumper stickers that says"horn broke watch for finger"!!! msot horns usually get water in them you need to check and see if your getting poer at horn.use a test light at horn and have someone push horn button. also can try tapping horn with a hammer whil;e someone pushes horn pad. if no power then check fuses and relay

Aug 07, 2008 | 2003 Volkswagen Jetta TDI

Not finding what you are looking for?
1998 Jeep Cherokee Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...