I`m guessing that you have tried to install the nozzle in different places in the filler neck while filling the car.if this you have tried then you may have a bad vent valve that is not working properly causing excess air pressure in the fuel tank shutting off the nozzle.have a shop check this out for you.
Have you tried another station or a different pump?
Does the pump nozzle have the the type of seal that fits tight against the filler neck? That seal has to be compressed so far for the pump to work properly. try to push the nozzle in further or pull back on the seal by hand to open it up. Could also be vapor pressure and pulling back by hand or fitting the nozzle in the tank where that seal leaves a small open to the filler neck will vent the vapor.
338 views
Usually answered in minutes!
×