Question about 1999 Nissan Quest

1 Answer

Programing a remote on a 99 quest

Hi, I want to know how do you program a remote to a 99 quest. I bought the car with only one remote and got one from ebay but dont know how to program it to my van.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 705 Answers

First make sure,that the batter is ok. You will need to have both remotes while doing this.
1: get in and lock the doors with the power door lock
2: insert the key into the ignitoin repeatedly IN and OUT 6 times in a row or just keep doing so, until the hazard flashers flash on the dash board (observe the dash board while inserting key)
3: after the hazadrs flash TURN key into the ACC position/not start.(dash will light up) DO NOT START
4: with the key in ACC position, hit lock button on the remote. That will program that remote.
5: to program the other remote simply unlock the door with the door lock switch and relock it with the swithc and hit the other remote button.
6: done

Posted on Sep 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Keyless remote


Hi, maybe check you let local electrician and they should be able to program it in :) Good luck

Dec 09, 2013 | 2007 Saturn Aura XR Sedan

2 Answers

How do you fix the key less remote ,... its broken


You might be only needing soldering, so I would suggest that you take it to a guy who knows about fixing electronics and they should be able to fix it. If the remote is not communicating then you need to call the dealer to tell you how to reprogram your remote to communicate with the alarm module in your car. hope that helps.

May 29, 2010 | 2007 Nissan Quest 3.5 Minivan

2 Answers

How do i program a key fob for a 1996 cadillac deville


you need to get a tech 2 to be able to promram the key fob

Aug 02, 2009 | 1996 Cadillac DeVille

1 Answer

How do you program a remote for 2005 Quest? thanks!


As a locksmith, this is the hardest car I ever had to program a key for. It requires a special computer which your local dealer or locksmith will have.

Jul 30, 2009 | 2005 Nissan Quest

1 Answer

Can't program Second remote to my Ford Explorer 99


reading your post you mention to "open and close switch"..not sure what refering to...these are the instructions from your vehicles service manual...good luck!

Programming NOTE: All keyless entry remote transmitters (15K601) are programmable and must be set at the same time.
NOTE: To program (or reprogram) the keyless entry remote transmitters into the RAP module, perform the following steps:
  1. Make sure that the anti-theft system is not armed or triggered.
  1. Turn the ignition switch (11572) from OFF to RUN eight times within ten seconds, ending in RUN. If the RAP module has successfully entered program mode, it will lock and then unlock all doors.
  1. Press any button on a keyless entry remote transmitter, and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been programmed.
  1. If the door locks do not respond for any keyless entry remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Diagnosis and Testing.
  1. Turn the ignition switch to the OFF position, or wait up to 20 seconds after step 2, to exit program mode. If a keyless entry remote transmitter has been programmed (or reprogrammed), the RAP module will lock and unlock all doors one last time to confirm.

Jun 08, 2009 | 1993 Ford Explorer Limited

1 Answer

Why do i have to take my remotes to a saab dealer for them to program them for $99.oo. i have 2 remotes for my saab. but they need to be programed.. any help on programming these myself? its a 99 Saab 9-3...


They need to be set to the computer in your car. The remotes are generic...

BUT Maybe it is in your Owners Manual... But otherwise... You are gonna have to pay to have them reset!

Apr 19, 2009 | 2008 Saab 9-3

1 Answer

Remote on '99 Jeep Cherokee not working...


Normally you can get the alarm to shut off by puttin ght key in the ignition or in the door and turning. The remote will need programed with the vehicle. Should run about 50.00 or so for service department to do this. My wife has a '99 cherokee and it did the same thing. I know the remote is the problem.

Mar 14, 2009 | 1999 Jeep Grand Cherokee

1 Answer

1999 Accord EX extra key


Well you get the spare key from the Dealership ,wal mart or any other places were it has the facilities to program the keys for your car (inbuilt chip ) usually Honda can program the key with hand held device and they charge $100 or hour labor charge .........Hope this information help you .....


Good luck...

Sep 13, 2008 | 1999 Honda Accord

2 Answers

Programming nissan Quest Remote control


I have a used Nissan Quest 1999 that Remote Control does not work . How can I program it?

Jun 29, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
1999 Nissan Quest Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...