Question about 1993 Acura Integra Hatchback

1 Answer

1994 Integra RS front end noise?

My 94 integra just started making a wierd noise comming from the front end. When I take off from a stop it makes a consistant high chirp or flutter sound. If I take off slowly you can't hear it, but the more gas I give the louder it gets. I know that both of the boots on the CV joints are cracked. Could this sound be coming from the axle or could it be somehting else like my clutch or throw out bearing?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Without hearing noises first hand it is very hard to diagnose.

Things to check from the description you gave:

- Heatshields/Exhaust
- Thow-out bearings will make noise depending on the clutch pedal being engaged/disengaged. The noise will come and go as you move the pedal in or release it.

I would rule out the CV joints if the noise happens while moving straight. CV joints will click while turning when they go bad.

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set timing 1998 integra 1.8l


cam or spark?
did you look at alldata.com first

94 or 98 integra?

Feb 28, 2014 | 1994 Acura Integra

1 Answer

I have a 94 integra is leaking water in passenger floorboard has sunroof do they have any front drains?


yes it does have front drains look behind the side kick panel in the front seat foot wells

May 31, 2012 | 1994 Acura Integra

1 Answer

Daughter has a 94 Acura Integra RS. She hit the back end of a POS and dented the guy's bumper (not that you could really tell any difference from before), but she smushed in her right front bumper area of...


THE BEST THING TO DO IS TO TAKE TO A BODY SHOP AND FIND OUT IF YOU GOT FRAME DAMAGE JUST BY WHAT YOUR ARE SAYING IT SOUNDS LIKE DOES ALWAYS LOOK AT BODY LINES BODY LINE CAN TELL YOU A LOT ABOUT THE CONDITION OF THE FRAME OF THE CAR...

Aug 17, 2010 | 1994 Acura Integra

1 Answer

1994 Acura Integra RS parking brake/emergency brake


you can try adjusting it first, you have to pull the center arm rest out and tighten the bolts. to get that off there is a cover under the ebrake cable with two screws then two screws on the side close to the floor in the back of the arm rest. then tightned the two bolts. if that does work you need a new cable. it also shouldnt be hard to do. it hooks to the caliper in the back with a little pin that you just pop out. take it off and run the new cable up to the handle and hook it up the same way it comes off. not sure what a shop would charge, but it shouldnt be hard to do at all.

Jul 27, 2010 | 1994 Acura Integra

1 Answer

How to remove a serpentine belt on a 94 integra


The Belt Diagram should be on the underside of your hood, however they have a way of disappearing.

If it is not there:

Click on the following free direct Link. It has the correct Serpentine and Drive Belt Diagrams for your 1994 Acura Integra 1.8L 4-Cylinder Engine. Included are Instructional and Directional Diagrams for your use.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/acura/model/integra/1994_acura_integra_drive_belt_routing_diagram.htm

Note the loosenng of the Alternator Mounting and Adjusting Bolts/Nuts inorder to remove the Drive Belt.

Feb 14, 2010 | 1994 Acura Integra

1 Answer

Can i put a 1994 acura integra ls trans to replace a 1989 acura i


I don't think this would be possible wihtout some hassles.

The engine type build changed twice between the 89 and the 94 series integra.

I would suggest you speak to Honda specialised mechanic before you purchase the 94 tranny.

Also check out the Honda forums as they ahve guys who have done some handy things with the ol integra

Feb 09, 2010 | 1989 Acura Integra

2 Answers

Acura Integra ID


there should be a sticker around the driver door that will tell you. if that fails you can always write the VIN down and search it most times the basic info is free (ie: make/mode/MFG year)

May 02, 2009 | 1994 Acura Integra

1 Answer

Acura lowering problem clunking front end


you got worn c v joints check for cut or damage boot.

Apr 05, 2009 | 1995 Acura Integra Coupe

Not finding what you are looking for?
1993 Acura Integra Hatchback Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...