Question about 2004 Pontiac Grand Am

1 Answer

I have a 1984 chevy truck 350. new battery, Forget start! It won't turn on ! I have power to dist. new ignition mod. and power to the steering col.

Posted by on

  • Darrell Howton Sep 16, 2011

    are we working on a 84 chevrolet pickup or a 2004 pontiac grand am

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 173 Answers

Forget start it won`t turn on but you have power to distributor i don`t under stand what you have yet the engine won`t crank over?? or it cranks but no start let me know thank you

Posted on Sep 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1984 300zx N/A is acting up where it'll start


How many miles are on it? Could be timing chain wear.

Aug 07, 2013 | 1984 Nissan 300ZX

1 Answer

Won't start. Have I missed something?


Starter is good,battery and connection,Cap is good no cracks.

Apr 23, 2013 | 1987 Chevrolet Camaro

1 Answer

1999 durango won't start


starter?
New battery drained = something is still powered, open/short.
new ign switch and steering won't lock = something was not put together right and the ignition is staying on and draining the battery.

Jan 19, 2013 | 1999 Dodge Durango

1 Answer

1986 350 engine changed timing chain won't start on #1 but starts and runs great if i set roder facing #6 dist cap is there two firing orders for this engine ?


THERE IS ONLY ONE FIRING ORDER FOR THIS IT HAS BEEN THE SAME SINCE 1960??? 18436572 WITH NO1 IF YOU ARE STANDING STRAIGHT IN FRONT OF THE ENGINE YOUR HEI DIST SHOULD HAVE 2 PRONGS STRAIGHT ACCROSS FACING YOU IF IT IS NOT YOU MUST PULL THE DIST, ROTATE THE ENGINE AROUND TO COMPRESSION STROKE, VERIFY THIS BY THE POINTER ON THE TIMING COVER SET IT TO 0 WITH THE PISTON IN NO1 CYLINDER UP IF NO 1 PISTON IS NOT UP FULLY EXTENDED IN THE SPARK PLUG HOLE YOU ARE NOT AT NO 1
IF THE PISTON IS FULLY EXTENDED AND YOU HEARD A AIR SOUND THEN YOU ARE RIGHT, PLACE THE DIST BACK IN TURN THE ROTOR 1 TO 2 NOTCHES BACK TO THE RIGHT AND HAVE SOME ONE CRANK THE ENGINE IN SPURTS, IT SHOULD DROP IN, THEN REPEAT THE PROCESS TO VERIFY YOU ARE ACTUALLY ON NO1 THEN BEGIN THE WIRING

Aug 22, 2012 | 1985 Chevrolet Chevy

2 Answers

1993 chevy pickup won't start


check for power to the starter with the key in the start position.

Sep 22, 2017 | 1993 Chevrolet K1500

1 Answer

1996 1500 chevy Z71 ,350 engine. Everything works electronic except when you turn key on it won't crank


First try getting a boost. It could be just a low battery. The starter takes much more power than everything else together. If you have already tried that, or it doesn't help, try shorting out the starter with a screwdriver. If it works , your ignition switch could be faulty, or the neutral switch for the shiter.

Jul 16, 2011 | 1997 Ford Expedition

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

1 Answer

Need help


You can do this on a temporary basis, but you need to find the wire. Try running from the ignition switch run side to the dist. at least you can turn it off.

Apr 18, 2009 | 1984 Oldsmobile Cutlass

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...