Question about 1993 Lincoln Town Car

1 Answer

A/c clutch freeze up and later comes on - 1993 Lincoln Town Car

Posted by on

  • mbassking Oct 07, 2008

    the clutch seems to freeze up when the temp is over 80 or has been running for a while. very frustrating in hot weather.

  • rodally Nov 13, 2008

    When my A/C is on it freezes up within minutes and quits blowing cold or acutally any air at all. You can hear the blower fan still blowing. Now when I turn the heat on it blows warm for a few minutes then the air stops as well,but you can still hear the motor fan still going? It's almost like something is blocking it. We replaced the blender door actuator last month but it didn't do anything. We then replaced the blower fan and it still isn't working right. When I park the car there is a considerable about of water dripping underneath.

    Allyson

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Have some check the evaporator. If it is dirty no air can pass threw and the evaporator can freeze up. Creating a lot of moisture when warm air coming in hits the evaporator.

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a pressure plate be resurfaced or should I just get a new one


Pressure plates are no to be resurfaced. They cannot be mounted in any way to ensure trueness when attempting the operation. Also the material is normally too thin to allow for it. Replacement clutch kits come come complete with clutch disc, pressure plate, and release bearing. Considering the effort involved in the removal and replacement of the transmission, it is foolish to skimp on these parts as the labor to do it again later will negate any savings you may obtain now.

Aug 25, 2016 | Cars & Trucks

1 Answer

Clutch santa fe 2009


could be you need to find a different shop.

Mar 03, 2013 | Hyundai Santa Fe Cars & Trucks

1 Answer

2000 Civic stolen, air controls taken, then clutch fell off


Coincidence... in my opinion.

1. In your long drive, you may have set the a/c on "Max" or "recirculate" ... and set the fan on low. This can cause "freezing" the core inside the vehicle; this will create a lot of pressure in the compressor and the clutch will slip.
The "freeze" will cause the air to feel warmer; because the refrigerant is not circulating correctly.

2. Also, if there was oil or some other lubricant on the clutch, the clutch would slip, heat-up and fall apart.

3. The "fixed" a/c controls may have left the "vent" (non-circulating) control disconnected so that the inside core is unable to receive any "outside" warm air to keep the core from freezing... (possible)

Hope this helps ... comments anyone??








Sep 14, 2009 | 2000 Honda Civic

1 Answer

Clutch problem


i would bleed the system again . make you get strong pressure. if that dose not work check throw out bear fork. it sittes on a ball stud good luck later

May 06, 2009 | 1993 Dodge Dakota

2 Answers

A/C problems


A/C works on a principal of compressing the gas in the system and sending it to the cool condensor in the car where it cools the vehicle, then goes to the front condensor where it releases the heat generated by the process. Several things can be happening here; the front condensor is plugged up with bugs and debris and needs to be cleaned; the interior condensor is freezing up from moisture freezing on it; the small control valve that makes the whole thing work is freezing up and the system is on hole untill it thaws and then it starts working again. There could be a problem with the amount of freon in the system. In the front of the engine next to the condensor is a freon storage canister with a small glass window in the top of it. With the airconditioning running look in the window and see if there is fluid running smoothly thru it of if it is bubbly and foamy going by the window. If bubbly and foamy then the A/C needs to be serviced. The compressor clutch will not work untill the system has the right pressure on the safety switch in the system. Good luck, RAC

Apr 13, 2009 | 2003 Honda Accord

1 Answer

Botch job


they most likely forgot to hook some wires back up i would bring it back to them and make them fix it.

Mar 07, 2009 | 1991 Mazda Protege

1 Answer

My 1997 f-150 truck transmission started to give me problems


It's a tranny problem the anti-freeze in the coolant destroyed the clutches in the tranny and all of the seals. This is a very bad problem the clutch material and the seals in that tranny are not made to stand up to the anti-freeze. The converter is less affected by because it not in the sealed housing of the tranny.

Jan 08, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Shrieking clutch 1996 mustang gt


Probably a throw-out bearing, also called a clutch release bearing. It will eventually have to be replaced, and sooner better than later. If it freezes up completely, you can do some damage to the clutch assembly or release arm.

Jul 26, 2008 | 1996 Ford Mustang

Not finding what you are looking for?
1993 Lincoln Town Car Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...