Question about 1996 Nissan 200SX

1 Answer

Knock sensor Ican not find the location of the knock sensor on my 1996 nissan 200 sx-r with the 2.0, help please

Posted by on

  • Anonymous Mar 15, 2014

    how do you fix a bearing on a 200 sx 1996 nissan

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Nissan Expert
  • 99 Answers

Its on the backside of the engine block underneath the intake manifold. It should be right above and a little to the left of the oil filter, if I remember right. I know for sure that it is on the backside of the engine block and not easy to get to if you don't have a lift.

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 nissan sentra sx 200 knock sensor location


Melvia, Knock sensor located under the intake manifold between cylinder #2-3 I believe, hard to change with out removing intake manifold, but can be done. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1995 1999 Nissan Maxima 1 2 Knock sensor replacement
KA24DE Knock Sensor Code 34 FREE REPLACEMENT How To
Knock sensor on 1995 Altima
Get the Best Priced Nissan Sentra Knock Sensor

Aug 21, 2016 | Nissan Cars & Trucks

1 Answer

Will a bad knock sensor cause a misfire. car is missing change the plugs no help codes are misfire and knock senser sometimes a #2 o2 sensor. 1999 maxima thanks for your help.


A Bad Knock Sensor will not cause a misfire, unless the advance is off due to a faulty Knock Sensor. The O2 Sensor will cause a random misfire.

Good luck on this repair.

Jan 21, 2011 | 1996 Nissan Maxima

1 Answer

My nissan 200 sx headlight wont work have canged


Check fuses, Get a tester and see if you actually get power to the lights. If you do get power and the lights don't work anyway then it is likely the light switch located on the steering column( has blinker, and light switch together). common Nissan problem.

Oct 17, 2009 | 1998 Nissan 200SX

1 Answer

Where can i find aftermarket parts for my nissan 200 sx ser 1995?


ya you can find ac kit in one of the wrecking yard.weather stripping check accessories shop.and parts from nissan sentra ,it depends what u depends what you useing.i think its very hard.some of ENGINE parts you can use i think.

Sep 29, 2009 | 1996 Nissan 200SX

1 Answer

94 200 sx se 1.6 will any other motor fit my


only GA series engines can be used in the GA series transmission.

Jun 25, 2009 | 1996 Nissan Sentra

3 Answers

Knock sensor 1996 v6 3.3 nissan pathfinder


The Crankshaft Position Sensor is located: Under hood, driver side, front engine area, mounted rear of crankshaft pulley
The Knock Sensor is located: Under hood, center, front engine area, below intake manifold, mounted on block

Jun 14, 2009 | 1996 Nissan Maxima

1 Answer

1996 Nissan Maxima 2.5 V6 Engine Knock sensor The engine runs fine; but it sets off 2 codes knock sensor & ignition. Just this week had the plug wire and knock sensor changed, new. Still the same code...


The knock sensor is a major pain in the a..s to change I would suggest taking it to a reputable shop for a second opinion to see if they realy performed the work. Also with OBD11 (2) diagnostics if you have multiple misfires its not the wires its something else, also if you got a code for a misfire it would be specific as to which cylinder is misfiring. My best guess would be to get your coil checked.

Mar 18, 2009 | 1996 Nissan Maxima

1 Answer

Knock sensor


Knock Sensor is located in the front engine area below intake manifold on the block. Unplug elec. connector, unscrew sensor to remove--- I believe it's about $125 part. Curt

Mar 15, 2009 | 1996 Nissan Maxima

1 Answer

Codes will not clear


Try clearing it with an OBD 2 code reader reader.

Feb 03, 2009 | 1996 Nissan Maxima

Not finding what you are looking for?
1996 Nissan 200SX Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...