Question about 1994 Plymouth Voyager

1 Answer

94 Plymouth Voyager Water Pump

How do I take out and install a new water pump in the 94 Plymouth Voyager Mini Van?

Posted by on

  • 3 more comments 
  • Anonymous Dec 10, 2008

    1994 plymouth grand voyager 3.3L. LOOKING FOR DIAGRAMS ON HOW TO REPLACE WATER PUMP. ALSO WOULD LIKE DASH DIAGRAM FOR HEATER PROBLEM; HAVE TO TAKE DASH APART.

  • sha121292 Jan 01, 2009

    where is it on the engine

  • Anonymous Mar 16, 2014

    how to remove power steering pump on a 1999 Plymouth Voyager

  • Anonymous Mar 20, 2014

    van just cut off while driving, turns over but won't start

  • Anonymous Mar 20, 2014

    Symtoms of a bad ICM 1996 Plymouth Voyager

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

Thw water pump stuff you need is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280215d73

The heater stuff is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280216054

Hope this helps! good luck!

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to know what the pipe is called that the lower rad hose hooks up to on the 1998 plymouth grand voyager mini van 3.0L, 3 speed automatic ?


if you follow the pipe does it go towards the transmission ? if so it's for the trans cooler. If not it will be the escape hose incase of overheating/to much pressure in the coolant system , if you go to a parts retailer like autozone they will have the part named on their data system , its a bit difficult without seeing vehicle to name parts . although you have given a good description, the lower rad hose carries cooled coolant so i would think it's the trans cooler but check at autozone or similar

Jul 07, 2014 | 1998 Plymouth Grand Voyager

1 Answer

Need to change water pump in 99 plymouth voyager 3.0 liter


  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.

To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.

  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs.
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50 / 50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.

Oct 16, 2013 | 1997 Plymouth Voyager

1 Answer

I have a 1989 plymouth voyager mini van, It got hot and we put complete new head gaskets on it and another water pump , and a new thermostate. But it still blows water out of radiator and shows hot on heat...


If the thermostat was installed backwards, it won't open when the engine heats up. The spring/sensor should go toward the engine and the valve plate goes toward the radiator. If the hoses stay cold, it points to no water flow as above. Hope this helps!

Sep 28, 2010 | 1989 Plymouth Voyager

1 Answer

Slow Leak in Water Pump-1999 Plymouth Voyager


What's probably happening is the weep hole on the water pump is leaking water. The weep hole is a warning sign that the water pump needs replaced. You don't have any heat because the impeller in the water pump is no longer circulating water.

Apr 23, 2010 | 1999 Plymouth Voyager

1 Answer

Water pump cost 40 $ i got it but how long will it take for someone to take out the old one then but the new one in it is a 1997 plymouth voyager 3litre v 6 mini van


it should take an experienced mechanic about two hours a do it yourselfer will take longer depending upon their mechanical abilities

Aug 28, 2009 | 1997 Plymouth Voyager

1 Answer

I need to know how to change to water pump on my 2000 plymoth voyager mini van


Need to loosen bolts for the water pump pulley. Remove belt and then remove pulley. Should be 5 10mm bolts holding the pump on. Remove the bolts. Reinstall in reverse order. Refill with new coolant.

May 12, 2009 | 2000 Plymouth Voyager

2 Answers

My 1997 Plymouth Voyager mini van 2.4 liter van is leaking the water on the outside of the van in the front passenger side. Can't find the leak. It leaks when I'm parked and when I'm driving.


well it can only come from the radiator hoses or the water pump...

to check if your water pump is still good just take a flashlight and spot on top of the pump. there should be a little hole on top behind the pulley. if it is damp you have to replace the pump.

besides that just check the hoses one at the time

Apr 29, 2009 | 1997 Plymouth Voyager

2 Answers

WHERE IS THE WATER PUMP LOCATED ON A 1998 PLYMOUTH GRAND VOYAGER


Here are the steps required to change the water pump on the 3.0L engine.

  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.
To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.
  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs. (27 Nm).
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50/50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.
34bef4a.jpg

Jan 12, 2009 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1994 Plymouth Voyager Logo

Related Topics:

1,006 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...